Fujitsubo Exhaust!!

[MC-BPT]

BPT is proud to introduce the Fujitsubo Wagolis for the Yaris. In case you don't know, Fujitsubo is the largest exhaust maker in Japan. They made very high quality and some of the sounding exhaust out there.

The spec on the exhaust is 45mm pipe diameter with 90mm slant tip. It is made of fully stainless steel. This exhaust is perfect for people that want something different than stock but a deeper and little bit louder exhaust tone.

The price is 439USD or 509CAD shipped !!

Here are some pictures of this nice exhaust.

http://www.boomplustoys.net/images/jdmtoyota/fujiwagolisforvitz.jpg

http://www.boomplustoys.net/images/jdmtoyota/fujiwagolisforvitz1.jpg

Payment Info:
- We take both CC and Paypal. PM or email me at inquiries@boomplustoys.net for further payment info.
- Canada Customer will pay GST and customer from BC will pay GST+PST.
- Shipping to Hawaii, Alaska, or international. Please PM me for shipping quote.
- For local pick up please PM me. I am located in Vancouver, Canada
- If you have any question, feel free to PM me.

[bigsky2]

I was looking at this exhaust very closely before deciding to get the TRD High Response Muffler Ver. S

This is a very nice muffler exhaust, it's a great aftermarket alternative to the TRD version.

[me_ver51]

will it clear the stock bumper? i like that it's quiet but from pictures i've seen it doesn't seem to fit without the JDM RS bumper...

[bigsky2]

It will be a very tight fit.
Might require different exhaust hangers (the rubber supports) so that the tail end of the pipe and tip sit lower, allowing for more clearance between the tip and bumper.

The TRD JDM High Response Muffler barely clears the bumper (check the thread in the Performance section). It was too close for me so I changed the hanger and it now has about about 3/4" clearance.

[bigsky2]

Well here's what it looks like mounted on a JDM Vitz RS with the rear bumper.

http://www.japanparts.com/images/ImageFromDB.php?base=1&no=1667

If you draw a straight line from one point of the ident for the exhaust to the other point, it looks like the exhaust tip will make contact with the bumper.

I think changing the exhaust hanger to let it sit lower won't be that much of an improvement. It might look like a little odd too because the tip is so large and round.

MC-BPT, what's the solution for this if mounted on a Canadian/USDM model with the CDM/USDM bumper?

[Violin]

May I humbly suggest these?: http://replacement.autopartswarehouse.com/parts/autopartswarehouse/quote2.jsp?product=H8050-40152&action=search&cart=&partnerSession=&usemake=&returnurl=_BASE

[bigsky2]

May I humbly suggest these?: http://replacement.autopartswarehouse.com/parts/autopartswarehouse/quote2.jsp?product=H8050-40152&action=search&cart=&partnerSession=&usemake=&returnurl=_BASE

Those'll work, but I'm afraid the tip will sit a little too low relative to the CDM/USDM bumper.

Personally I think it looks a little retarded to have a large and round tip such as this to sit below a straight edged bumper, no matter what the clearance.

Another good reason to get the JDM rear bumper :thumbsup:

[RossP]

I can vouch for Fujitsubo exhausts, top quality, I have a Power Getter II on my Vitz

[me_ver51]

i have to agree with bigsky2...the tip doesn't look right without the proper bumper...maybe i'll considered the TRD one...how's shipping up to Canada like?

[MC-BPT]

I have not try to install it on a Yaris, but from my previous experience with the Echo/Vitz, all you need is to goto an automotive hardware store and get a longer hanger to let the exhaust sit lower.

But of course, the best solution will be do a JDM bumper swap.:biggrin:

[bigsky2]

i have to agree with bigsky2...the tip doesn't look right without the proper bumper...maybe i'll considered the TRD one...how's shipping up to Canada like?

I got mine from TRDSparks, another vendor here on the forums.
Shipping to Canada was US $66 UPS Standard.

[me_ver51]

I got mine from TRDSparks, another vendor here on the forums.
Shipping to Canada was US $66 UPS Standard.

may i ask how much you paid for customs?

[eTiMaGo]

I had the chance to hear this exhaust on a Yaris here, it's actually quite nice sounding without being too loud... I'm contemplating changing mine, my HKS sounds damn good but just too loud!

[hasher22]

I had the chance to hear this exhaust on a Yaris here, it's actually quite nice sounding without being too loud... I'm contemplating changing mine, my HKS sounds damn good but just too loud!

Have u tried installin a silencer??

[eTiMaGo]

Wouldn't that be quite restrictive?

[tca4]

hmmm i wonder how much gain that has?

[eTiMaGo]

How much gain? here ya go, was right above: :wink:


http://www.japanparts.com/images/ImageFromDB.php?base=1&no=1667

[MC-BPT]

This exhaust is street style, so it will be very quiet compare to other N1 style or race exhaust. It also won't give as much power gain as those loud exhaust. However, for a small displacement NA car, no exhaust is going to give too much gain.
Also, I wouldn't recommend to put a N1 style or race exhaust on a street car and run it with silencer on the street. I have seen silencer actually make the exhaust made less power than stock exhaust.