push to start engine button DIY (done)

[yarismo]

finally, I realised my DIY (start engine button).

:thumbup: Here are pictures

the button with two wires
http://www.yarisworld.com/forums/attachment.php?attachmentid=32943&stc=1&d=1269970436

remove the panel
http://www.yarisworld.com/forums/attachment.php?attachmentid=32944&stc=1&d=1269970436

drill a hole that fits your button
http://www.yarisworld.com/forums/attachment.php?attachmentid=32945&stc=1&d=1269970436

place the button and put some glue around it
http://www.yarisworld.com/forums/attachment.php?attachmentid=32946&stc=1&d=1269970436

should looks like this
http://www.yarisworld.com/forums/attachment.php?attachmentid=32947&stc=1&d=1269970436

the panel + button in place
http://www.yarisworld.com/forums/attachment.php?attachmentid=32948&stc=1&d=1269970640

general view
http://www.yarisworld.com/forums/attachment.php?attachmentid=32949&stc=1&d=1269970640

[YarisSedan]

Unfortunately none of your pictuers work they show up as little boxes with a red x

[custom Lftback]

^ +1

[zachryboles]

yah your wiring looks crossed.... only 2 red wires on a protoboard?:tongue:

[firebob]

I got the point the first time I saw each pic.

[Reeves360]

Pictures are great but where is the rest of the DIY?

I thought you would have included what wires you are hooking into.

Looks GREAT!

I think this would look a bit better with the OEM button or the TRD one.

[yarismo]

http://www.yarisworld.com/forums/attachment.php?attachmentid=32978&stc=1&d=1270066463

sorry but this kind of button is all what I found.