Car alarm help!

[jetaimejsc]

I have manual locks and I went out and bought an alarm and I need your help wiring this thing up and if you could tell me what is it that I need. Basically all I want to do is be able to lock and unlock my doors. Lights flashing and beeping when doing so would be a bonus for me. Please help. Also if anyone near Memphis TN can do it and hook me up let me know. We could wirk something out!

This is what I have, the axact thing please follow links:

-alarm
http://www.sonicelectronix.com/item_19281_Prestige+APS25N+by+Audiovox.html

and actuators but it's not a crime guard just some cheap actuators. 2 of them actually

http://m.crutchfield.com/mt/www.crutchfield.com/p_514DS24/Crime-Guard-DS2-4.html?tp=154&osid=759982958&un_jtt_redirect

[CTScott]

Here's a wiring guide that I put together for remote start/keyless entry. It will help you with everything except the wiring specific to your aftermarket actuators:

http://www.yarisworld.com/forums/showthread.php?t=24860&highlight=diy+wiring

[jetaimejsc]

So what do I do about the actuators?

[CTScott]

So what do I do about the actuators?

Did you purchase the actuators with an installation kit? If so, you should have documentation on how to connect the control module for them to a keyless entry system. If not, then you would have to use a series of relays to drive the actuators from your keyless entry system (this is not a trivial undertaking).

[Ranger SVO]

I'm gonna assume that your alarm module does not have onboard relays for your lock actuators.

You will need two relays and do NOT forget to fuse your power wire