jm350
04-03-2010, 07:50 PM
Yes, i did it myself and i'm not a pro !!! :drool:
First i covered the front noze with some masking tape and paper tooked at the bodyshop of my job !!!
(i work in a KIA dealer).
....It look's like a doctor with his mask before an operation !!! :biggrin:
http://www3.sympatico.ca/jmhurtubise/bump/P4030005.JPG
And i sanded it with a 320 and 600 grid sand paper.
http://www3.sympatico.ca/jmhurtubise/bump/P4030001.JPG
After that i put some primer....then sanded again with a 1000 sand paper...
http://www3.sympatico.ca/jmhurtubise/bump/P4030006.JPG
Then....the color (8T0)....
http://www3.sympatico.ca/jmhurtubise/bump/P4030011.JPG
http://www3.sympatico.ca/jmhurtubise/bump/P4030013.JPG
...later......finally i put the Clear coat and........tadaaaa !!!
http://www3.sympatico.ca/jmhurtubise/bump/P4030fgd007.JPG
http://www3.sympatico.ca/jmhurtubise/bump/P4030fgd007%20(1).JPG
http://www3.sympatico.ca/jmhurtubise/bump/P4030fgd007%20(3).JPG
Not too bad for a beginner !!! :w00t::headbang:
First i covered the front noze with some masking tape and paper tooked at the bodyshop of my job !!!
(i work in a KIA dealer).
....It look's like a doctor with his mask before an operation !!! :biggrin:
http://www3.sympatico.ca/jmhurtubise/bump/P4030005.JPG
And i sanded it with a 320 and 600 grid sand paper.
http://www3.sympatico.ca/jmhurtubise/bump/P4030001.JPG
After that i put some primer....then sanded again with a 1000 sand paper...
http://www3.sympatico.ca/jmhurtubise/bump/P4030006.JPG
Then....the color (8T0)....
http://www3.sympatico.ca/jmhurtubise/bump/P4030011.JPG
http://www3.sympatico.ca/jmhurtubise/bump/P4030013.JPG
...later......finally i put the Clear coat and........tadaaaa !!!
http://www3.sympatico.ca/jmhurtubise/bump/P4030fgd007.JPG
http://www3.sympatico.ca/jmhurtubise/bump/P4030fgd007%20(1).JPG
http://www3.sympatico.ca/jmhurtubise/bump/P4030fgd007%20(3).JPG
Not too bad for a beginner !!! :w00t::headbang: