PDA

View Full Version : how to remove the upper glove box covers?


kac
04-29-2010, 01:44 PM
I did some searching and couldn't find any info on this.

I've seen pictures of people who have removed the cover to their upper glove boxes and I would like to give it a try but I was just outside messing with 'em and I cannot figure out how to get the lid off.

Any help would be greatly appreciated.

Thanks!

CTScott
04-29-2010, 02:41 PM
There are two screws that mount each of the upper lid assemblies. The screws are on the backside of the dash. I am not sure if you can get at them without pulling the upper dash. When I removed the covers from Crashy', but after I had already pulled the dash.

kac
04-29-2010, 02:44 PM
thanks. I'm not in any big hurry to pull the upper dash off to get to those screws, so i'll take a look at it again and see if it is possible to get to 'em without pulling that off, if not then I'll just have to wait a while to check it out without the lids on 'em.

CTScott
04-29-2010, 02:46 PM
This might help...

33593

kac
04-29-2010, 02:47 PM
yes it does. thanks.

insane4hussain
04-03-2026, 02:45 AM
Any has an easier way to replace it without removing the whole dashboard?