Sub/Amp Question Re: Impedence Load

[H3LlIoN]

Okay...quick question...

Can I drive four of these:

http://www.infinitysystems.com/car/products/product_detail.aspx?prod=REF860W&cat=SUB&ser=REF&Language=ENG&Country=US&Region=USA

off one of these:

http://www.alpine-usa.com/US-en/products/product.php?model=PDX-1.1000

Or will ohm load be too low and burn amp/subs?

Also, can someone post the math behind this, so I can understand it? Thanks,

- H

[H3LlIoN]

Oh and how much power will be making it to each sub? Thanks...

[Palmer812]

That amp puts out the same power at 2 or 4 ohms(1000 watts at 14.4 volts at 1% thd). With 4 4 ohm subs you would want to run a series parallel configuration to end up at 4 ohms. That puts you at 250 watts each.

[H3LlIoN]

Disregarding the ohm load labels, is this the proper wiring sequence of which you speak?

Thanks,

http://www.aoct.org/marshall/Series-ParallelSpeakerDiagram.jpg

[Palmer812]

Yes sir.

[H3LlIoN]

Thank you Palmer!