PDA

View Full Version : New v2 splitters/winglets!

Rocks A GD3
06-07-2010, 07:16 PM
Ok guys finally got things together and completed. Snapped some pictures tonight (excuse the quality its on my iphone).

So with this set we set to improve on the original, by making the fin taller since a lot of people wanted them that way. We raised the fin by half an inch and it is noticeable taller now. Looks great.

http://i124.photobucket.com/albums/p34/TuansSn/ARC%20rep%20Splitters/IMG_0659.jpg

And now to the completely new design, we kind of went for the 'shark fin' look. It looks a bit more aggressive. I wasn't expecting it to look this good from our design on paper. We also took the liberty to put in holes for both sets. Although the holes a bit small, rivots might work well or you guys can just enlarge the holes, or even make new holes to line it up to how you guys want it.

http://i124.photobucket.com/albums/p34/TuansSn/ARC%20rep%20Splitters/IMG_0656.jpg

http://i124.photobucket.com/albums/p34/TuansSn/ARC%20rep%20Splitters/IMG_0658-1.jpg


Comparison shot of the two fins.
http://i124.photobucket.com/albums/p34/TuansSn/ARC%20rep%20Splitters/IMG_0660.jpg

Pricing is set at $85 plus shipping per set.

However the first sell from each set will be at a discount. PM me if you're interested. Hope you like them guys!
auxmike
06-07-2010, 08:23 PM
Any pics as to what they look like on a Yaris?
Do they need to be painted first, or installed as is?
Rocks A GD3
06-07-2010, 08:35 PM
Pics on page 2 and 3.

http://www.yarisworld.com/forums/showthread.php?t=26809&page=2

So far we have confirmed fitment on Garm's burnout bumper and the Yaris S sedan, another guy on MicroImage with an 09' RS got it to fit with a bit of modification. Unless you wanted the aluminum look you should drill out the holes, then paint.
ddongbap
06-08-2010, 12:06 AM
Garm, you gonna be carryin' these?
Rocks A GD3
06-08-2010, 12:19 AM
You can pick these up directly from me. Just send me a pm for any questions you might have.
ddongbap
06-08-2010, 12:51 AM
You're so far, and i hate waiting for shipping. =[
Rocks A GD3
06-08-2010, 08:29 AM
Order one now and you could probably have it by the end of the week.
advocate
06-08-2010, 04:38 PM
me thinks these + neffy = sex

any ideas on how to attach them to the bumper?
cali yaris
06-08-2010, 05:26 PM
Garm, you gonna be carryin' these?

You can pick these up directly from me. Just send me a pm for any questions you might have.

Better become a vendor now then, if you're not going to sell through me. :frown:
ddongbap
06-08-2010, 05:43 PM
Order one now and you could probably have it by the end of the week.

Thats still waiting. QQ!
kac
06-08-2010, 05:44 PM
Better become a vendor now then, if you're not going to sell through me. :frown:

Or face the effect of getting your crap deleted... i've seen it happen.
YAR1S
06-08-2010, 06:17 PM
These wont fit on a stock bumper? from the post garm made on the picture of the ones on his car...... ?
Astroman
06-09-2010, 06:26 PM
Sorry but I'm going to have to close this thread until you get vendor status. Its not fair to our paying vendors.
tomato
06-09-2010, 06:40 PM
Sorry but I'm going to have to close this thread until you get vendor status. Its not fair to our paying vendors.

+1

Sorry guys. Same rules for everybody.
OP I sent you a PM. Bounce me back when you get a chance.