Scion XB/XD Silver/Dark Grey Leather Steering wheel

[DED1982]

***PENDING SALE ON STEERING WHEEL... WILL UPDATE AFTER SALE***

Direct fit into our beloved Yarii. I'm getting out of the Toyota game though, and heading back to old school VWs.

http://i834.photobucket.com/albums/zz262/DouglasDassel/Yaris%20Radio%20and%20steering%20wheel%20for%20sal e/IMG_0101.jpg

http://i834.photobucket.com/albums/zz262/DouglasDassel/Yaris%20Radio%20and%20steering%20wheel%20for%20sal e/IMG_0102.jpg

Bought new, used for 1.5 years. Leather is gorgeous and feels so good to drive with. These should have come stock. Perfect match for the dash and silver center stack. Airbag not included. Plug and play OEM+ mod!

$150 plus shipping



Email ded1982@windstream.net or text/call me (478) 297-9969 - Doug

Also, if you're local, I'd be glad to meet halfway (anywhere in Georgia), in that case there would be no shipping

[auxmike]

Stick with Toyota, the VWs tend to spend lots of time in the shop. Nice wheel, BTW....

[bizzlebaby]

Pm sent

[DED1982]

PM replied!

[pennyracer]

did you get the deal done ?

[pennyracer]

hi im looking for info on what year scions will the steering wheel swap directly to a 08 yaris liftback any one have this info please advise

[bzinn 1]

scion tC wheel will fit directly.....all years 05-10 same wheel on the tC.....first gen xB and xA wheels will not fit

[sleey0]

Found the part.

Now, how did you get the wheel off of the car?

[CTScott]

I apologize to the OP for the thread jacking, but to answer the questions:

TC steering wheels fit, but the "notch" on the back of the wheel is different. The Yaris steering wheel has a an opening, where the Scion one has a bar. This prevents you from being able to perfectly center the steering wheel on the clock spring. I bought a TC steering wheel with the cruise stalk attached off ebay (for far less than a cruise stalk), so I did some experimenting with the TC steering wheel, as it is a nice leather one.

Yaris Steering Wheel:
35347

Scion TC Steering Whel:
35348

Yaris Clockspring (note the two tabs that the grooves in the steering wheel center on):
35349



Here's a video that I put together to show someone how to remove the clock spring, which also shows removing the steering wheel.
http://www.youtube.com/watch?v=LgWSzVeILhc

[pennyracer]

thanks for the heads up this helps alot you really know your stuff CTScott this is what makes this site so helpfull so does the binker shut off when the wheel retuns to the center position after a turn if thats what your mean by it not centering completly ? thanks again bud i want t tc leather wheel just want it work right the first time i install it

[CTScott]

thanks for the heads up this helps alot you really know your stuff CTScott this is what makes this site so helpfull so does the binker shut off when the wheel retuns to the center position after a turn if thats what your mean by it not centering completly ? thanks again bud i want t tc leather wheel just want it work right the first time i install it


Good questions - After eating lunch, I just mounted the TC one to Crashy. When I tried it before, I had the clockspring taped so that it would not rotate, so in order to slide the steering wheel on I had to cock it a few degrees.

This time I left the clockspring free and rotated it, instead of the wheel. Doing so allows the wheel to go on straight, and shouldn't affect the clockspring's operation, as it is designed to allow for 5 revolutions (so, ~5 degrees out of 1800 is fairly negligible). The turn signal return worked fine in both directions.

Here are some pics:

TC steering wheel mounted on Crashy:
35354

Closeup of clockspring rotation required to put steering wheel on straight:
35355

Airbag on - Not that the fit isn't quite as nice as the xB/xD wheel above:
35356

[cali yaris]

you have an airbag on Crashy?

[CTScott]

you have an airbag on Crashy?

Not any more. If you look closely you'll see the seams, where I glued the airbag cover back together.

[pennyracer]

so now that is solved thanks again ctscott looks like the scion air bag has a much better look then putting on yairs air bag on scion wheel wonder if the air bags plug in the same way ? sorry for all the questions but i have another one whats the best winshield wiper controll swith to replace the yaris switch to gain more rear window wiper controll settings found one off a lexus 05 wonder if it will work number on the lexus switch is 17a082-lh

[CTScott]

so now that is solved thanks again ctscott looks like the scion air bag has a much better look then putting on yairs air bag on scion wheel wonder if the air bags plug in the same way ? sorry for all the questions but i have another one whats the best winshield wiper controll swith to replace the yaris switch to gain more rear window wiper controll settings found one off a lexus 05 wonder if it will work number on the lexus switch is 17a082-lh


From what I've seen the 2008+ Scion airbags have the same connectors as the Yaris airbag (and they have the dual squibs, unlike the Japanese Vitz airbags, which just have one squib).

For the Wiper stalk check out my DIY for part numbers. The place in the thread where I bought my Prius stalk from typically has them available. The part number that you posted is not a correct number, as it should have 10 digits.

http://www.yarisworld.com/forums/showthread.php?t=15512&highlight=diy+wiper

[MUSKOKA800]

Thanks DED1982.
Canada Post delivered today. The wheel was well packed and in pristine condition.

And thanks also to CTScott for the tutorial.
It'll help greatly with the installation.