View Full Version : New England Weather )o:
derickveliz2
08-12-2010, 01:09 PM
I'm going to need to restore some after market parts that are getting RUST,
The RS badge and Sport Mesh Grill showing some damage, what would be the best way to restore it?
http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/39a09f2c.jpg
The NF210 are showing signs of rust...
http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/7323d141.jpg
and the Ultra Racing 19mm rear sway bar is showing some rust as well
http://i634.photobucket.com/albums/uu61/derickveliz/Yarisito/9d58a787.jpg
I guess most of the after market parts are not designed for New England Weather :iono:
I'm going to restore all these parts before winter this year!
.:burnrubber:
lunjiaow
08-12-2010, 08:07 PM
wow. never seen those sway bars like that before. My RS badge is becoming like yours from highway driving. Springs usually get rusty like that after a while.
Sandblast and powder coat them.
yaris 2sz
08-13-2010, 03:21 AM
are these from the salt on road?
derickveliz2
08-13-2010, 10:30 AM
I guess after a little bit more than a year the cold weather and salt on the road, really damages after market parts.
My springs look the same. My grill does too.
(Don't have an emblem or rear sway bar.)
derickveliz2
08-16-2010, 06:26 PM
Dam winters!
derickveliz2
09-08-2010, 01:43 PM
Sway bar is out for a face lift!
http://lh3.ggpht.com/_0uPhXFVEEJE/TId27For42I/AAAAAAAAbCw/g2wIj-YhP_I/s512/DSC_4141.JPG
derickveliz2
09-08-2010, 02:19 PM
Rear springs too...
http://lh4.ggpht.com/_0uPhXFVEEJE/TId3Vz-xcvI/AAAAAAAAbHI/V0fBGfXEJHc/s512/DSC_4175.JPG
47_MasoN_47
09-08-2010, 05:45 PM
Oh wow... one of the things that make me happy to live in the south...the few days that it is cold here it's nowhere near cold enough to justify salting the roads.
HTM Yaris
09-08-2010, 07:50 PM
Maybe you should try what I do , that is wax the fudge out of it . Anything that is painted ( clearcoat included ) gets a thorough waxing b4 going on my Yaris . Yup springs , shocks , and wheels all got waxed . For my badges I put a coat of clear paint then wax .
Also you could go to a metal fab shop that has a plasma cutter and get those badges made from stainless ....
Hope this helps
henry33
09-09-2010, 04:28 AM
Oh this is not very good to see before winter :( I have new car and winter is crazy in here :)
derickveliz2
10-07-2010, 12:33 PM
OK, I did sand and repaint the sway bar and springs... the good thing I spoke with Tanable and they will replace my springs! NICE!
http://lh5.ggpht.com/_0uPhXFVEEJE/TId3i6g2QdI/AAAAAAAAbI0/knohstKBcUs/s512/DSC_4188.JPG
redglare45
10-07-2010, 01:09 PM
Nice work and congrats on getting Tanabe to replace your springs.
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.