GB- Push to Start , With SMART ENTRY

[1NZYaris1]

Okay i have with Garm's approval
started a GROUP BUY on MI for the COST $250.US SHIPPED
Push to Start - Smart Entry RFID system :thumbsup:

group Buy Thread is here
http://www.microimageonline.com/forums/showthread.php/2589-Group-Buy-PUSH-TO-START-amp-SMART-ENTRY-.

INFO THREAD IS HERE
http://www.microimageonline.com/forums/showthread.php/2523-Push-to-Start-Smart-Entry-for-279

You will also need to purchase this a
Fortin Key-Override-All. If you have Factory Power Locks and a Chipped Key http://ifar.ca/en/products/flash/key-override-all/

Thanks for looking :thumbsup:

[Kioshi]

Ray, is there something going on for those of us who have already installed CTScott's PTS module w/ the PTS button and that would like to have the SMART Entry tied w/ it?

[CTScott]

Kioshi - To install this one you'd have to replace mine with it.

I am working on adding an RFID tag reader to mine to make it completely keyless. But, for a complete system that includes smart entry this seems to be a good deal. I was going to install one of these on mine, but I really like my remote starter and am going to add a hatch popper and this system doesn't support either of those.

[Kioshi]

Kioshi - To install this one you'd have to replace mine with it.

I am working on adding an RFID tag reader to mine to make it completely keyless. But, for a complete system that includes smart entry this seems to be a good deal. I was going to install one of these on mine, but I really like my remote starter and am going to add a hatch popper and this system doesn't support either of those.

Will you be producing another RFID tag reader? I wouldn't mind going that route and having that added onto my car.

My ignition wires are so short from all the errors i went through with the alarm/module, I don't think i can fiddle around with removing and adding this one to it :frown:

[CTScott]

Will you be producing another RFID tag reader? I wouldn't mind going that route and having that added onto my car.

My ignition wires are so short from all the errors i went through with the alarm/module, I don't think i can fiddle around with removing and adding this one to it :frown:

Yes, my intention is to make the RFID reader an add-on for my existing module.

[1NZYaris1]

Yes, my intention is to make the RFID reader an add-on for my existing module.

When , before or after the the Yari Guage :thumbup:
any estimate on price .:bow:

[eTiMaGo]

btw I am using an earlier version of this kit for about 6 months now, it rocks. Not having to fumble for keys is just priceless!

[CTScott]

When , before or after the the Yari Guage :thumbup:
any estimate on price .:bow:

Before. This is actually a much easier bit of development than the YarGauge. Price is looking to be $100 for the PTS module with the RFID reader and 4 RFID key tags (two that are literally the size and thickness of a credit card and two keyfob tags). It would also require a PTS switch, which can typically be purchased for ~$79.

http://www.robotshop.com/Images/xbig/en/seeedstudio-125khz-rfid-tags-B.jpg

[Kioshi]

I'm in...
could you use the 6-pin connector for when I purchase the module w/ the reader from you CTScott? I think thats how you wired up my PTS switch + module. :)

[1NZYaris1]

Before. This is actually a much easier bit of development than the YarGauge. Price is looking to be $100 for the PTS module with the RFID reader and 4 RFID key tags (two that are literally the size and thickness of a credit card and two keyfob tags). It would also require a PTS switch, which can typically be purchased for ~$79.

http://www.robotshop.com/Images/xbig/en/seeedstudio-125khz-rfid-tags-B.jpg

Will the modual read the Tach signal this time , lol.
i know i shouldn't stall the car , but i do lol:smoking:

[CTScott]

Will the modual read the Tach signal this time , lol.
i know i shouldn't stall the car , but i do lol:smoking:

Yes. The voltage measuring method of deciding if it's running is just not accurate enough.

[mrbond]

holy cowwwwww this is awesome! When would the deadline be to pay?

[alamocoastie]

Will it work for someone without power locks? or will I need to purchase solenoids for that?

[1NZYaris1]

Will it work for someone without power locks? or will I need to purchase solenoids for that?


Uhhhm , yes you need power locks for this to be keyless entry :thumbsup:
Mr Bond

mrbondholy cowwwwww this is awesome! When would the deadline be to pay?

mrbondholy cowwwwww this is awesome! When would the deadline be to pay? holy cowwwwww this is awesome! When would the deadline be to pay?

PM me if you want :thumbsup:

[zaheerb]

Hi all,

Please give details regarding where to buy(online) the Push Start module with all required items and upgrades plus the detailed installation instructions/manuals.

[Kioshi]

Hi all,

Please give details regarding where to buy(online) the Push Start module with all required items and upgrades plus the detailed installation instructions/manuals.

Hello there,

If you want to buy the Push Start Module w/ the Push Start Button without having the SmartKey system...you need to contac CTScott on this forum for the module.

If you go on ebay, and search for Push to Start button...you wil find Avalon, Camry, Lexus buttons. Any buttons from those models will work on your Vitz.

[1NZYaris1]

Hi all,

Please give details regarding where to buy(online) the Push Start module with all required items and upgrades plus the detailed installation instructions/manuals.


Or i can sell you mine for $90.US Shipped 100% complete with Button :thumbsup:

[tk-421]

I wish I had the money for this! :frown:

[blacks]

Hi
I would like to know what all i need to buy for me to install the push start and the keyless entry for my 2007 Toyota Yaris and is there a DIY on how to install it ?
Is it hard to do or if u have a little car knowledge it's fine ?

[1NZYaris1]

Hi
I would like to know what all i need to buy for me to install the push start and the keyless entry for my 2007 Toyota Yaris and is there a DIY on how to install it ?
Is it hard to do or if u have a little car knowledge it's fine ?

what you need depends on what your car has to start with :thumbsup:
ie your car needs
1 power locks $50. - $100.00 depending on where and how you buy it

2 remote start package $250.US delivered

3 Key Bypass modual $50. + Depending on where and how you buy it

is it easy to install , i do not know as i have not purchased any yet
and those that have paid full retail for them have not said yet .:iono:

Do you need all three parts some people dont

[blacks]

How is the price for all of those things looking ?

[1NZYaris1]

thread above updated :thumbsup:

[blacks]

Well i already have the power lock for my vehicule
i would only need the remote start package and the key bypass module
Does this package come with the keyless entry or not ?
Do i need a special car alarm to go with this remote start package ?
Do u have the instruction on installing these packages that i could see how hard it is to do ?

[1NZYaris1]

Well i already have the power lock for my vehicule
i would only need the remote start package and the key bypass module
Does this package come with the keyless entry or not ?
Do i need a special car alarm to go with this remote start package ?
Do u have the instruction on installing these packages that i could see how hard it is to do ?

Yes that is the purpose of this package KEY LESS ENTRY .
but your car must have power locks first (note some US models Don'T)
there is a PDF file on the first page with install instructions :thumbsup:

i don't think this unit will work with a remote a start system , and a push button system togeather , but i am not sure .

Your $250. buys the Push button start with keyless entry (credit card key lol) Thats it :bow:

[blacks]

I'm not seeing any pdf file there but can you send me the link for it ?

[1NZYaris1]

http://www.microimageonline.com/forums/showthread.php/2589-Group-Buy-PUSH-TO-START-amp-SMART-ENTRY

theres the link for you, have a read .
i have not purchased any yet as there is no real interest
as no one has installed 1 in a Yaris Yet :thumbsup:

[GeneralDon7]

Has anyone installed this on there yaris yet, I am seriously considering this as my summer project.

[PROX4x4]

Okay i have with Garm's approval
started a GROUP BUY on MI for the COST $250.US SHIPPED
Push to Start - Smart Entry RFID system :thumbsup:

group Buy Thread is here
http://www.microimageonline.com/forums/showthread.php/2589-Group-Buy-PUSH-TO-START-amp-SMART-ENTRY-.

INFO THREAD IS HERE
http://www.microimageonline.com/forums/showthread.php/2523-Push-to-Start-Smart-Entry-for-279

You will also need to purchase this a
Fortin Key-Override-All. If you have Factory Power Locks and a Chipped Key http://ifar.ca/en/products/flash/key-override-all/

Thanks for looking :thumbsup:

Wow I was just looking for these, does it have the capabilities of below? if yes then I am in, also can you please post those PDF's here as I could not become a member of Microimage (pending approval).

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190545332978&viewitem=&sspagename=STRK%3AMEWAX%3AIT
:biggrin:

[1NZYaris1]

That ebay one is nothing like what WAS on offer

[PROX4x4]

That ebay one is nothing like what WAS on offer

How was the result? was it easy to install? :thumbsup:

[Lil Abner]

Well, I got the Push-To-Start module installed, and tied into my aftermarket alarm/remote start. I purchased the RFID module, but won't install it due to the remote start. Installation wasn't bad, but had some big road bumps. The installation says to use the brake switch for when you start the car. But since I have a manual, I didn't want to have to push the clutch AND brake in order to start the car. And the clutch switches don't have a ground or power when triggered, so I had to get tricky. I also had to use my aftermarket alarm to turn the push-to-start on and off. The circuit I built for it prevents someone from cutting the alarm power and trying to start the car. If the alarm doesn't trigger the circuit, the Push-to-Start won't get a signal.

I also ran into a problem during engine crank. The module has two (2) ignition outputs (ON1 and ON2). When the button is pushed to be in the ON position, both outputs have 12V. However, during crank, ON2 lost 12V. I don't know if my module is faulty or not, but it was easily bypassed. I might keep digging to see why that is. I also installed the back-up ignition relays just in case.

But all in all, not bad. Much easier when you pull the top of the dash out. The RFID module would also be easy to install, much easier than a remote start.

http://www.yarisworld.com/forums/picture.php?albumid=528&pictureid=4614

And a video:
http://www.youtube.com/watch?v=JkYineHDG44

[CTScott]

Well, I got the Push-To-Start module installed, and tied into my aftermarket alarm/remote start. I purchased the RFID module, but won't install it due to the remote start. Installation wasn't bad, but had some big road bumps. The installation says to use the brake switch for when you start the car. But since I have a manual, I didn't want to have to push the clutch AND brake in order to start the car. And the clutch switches don't have a ground or power when triggered, so I had to get tricky. I also had to use my aftermarket alarm to turn the push-to-start on and off. The circuit I built for it prevents someone from cutting the alarm power and trying to start the car. If the alarm doesn't trigger the circuit, the Push-to-Start won't get a signal.

I also ran into a problem during engine crank. The module has two (2) ignition outputs (ON1 and ON2). When the button is pushed to be in the ON position, both outputs have 12V. However, during crank, ON2 lost 12V. I don't know if my module is faulty or not, but it was easily bypassed. I might keep digging to see why that is. I also installed the back-up ignition relays just in case.

But all in all, not bad. Much easier when you pull the top of the dash out. The RFID module would also be easy to install, much easier than a remote start.

http://www.yarisworld.com/forums/picture.php?albumid=528&pictureid=4614

And a video:
http://www.youtube.com/watch?v=JkYineHDG44


Nice! Using the alarm remote in place of the RFID card definitely makes sense.

[boggydee]

anyone got s stwp by step how to install this?