turbo feed lines

[1.5ty]

where is the best place to tap a oil feed line on a 09 yaris

[cali yaris]

one good place is where the pressure sensor is.

[Focus_Sh1ft]

http://www.glowshiftdirect.com/oilfilter-sender-adapter-34unf-16.aspx

Should be more than it's worth. HIGHLY recommended.

[1.5ty]

thanks for the help

[pimp my yaris]

I tapped at the pressure sensor. My oil feed line came with a T-fitting to mount the sensor and line.

[1.5ty]

i know this is a dumb ? but where can i find the oil sensor Ive looked all over the engine bay and didn't come across it

[sleey0]

http://www.glowshiftdirect.com/oilfilter-sender-adapter-34unf-16.aspx

Should be more than it's worth. HIGHLY recommended.

Can that be used as a drain/return line as well?

[Focus_Sh1ft]

Can that be used as a drain/return line as well?

Haha, I asked the same thing originally. No, it can't be because the oil filter is pressurized. It can only be used as a feed (that means it can be used for oil pressure readings as well).

i know this is a dumb ? but where can i find the oil sensor Ive looked all over the engine bay and didn't come across it

Yeah, it's stupidly difficult to get at. It's right by the starter, and directly under the intake manifold. I'm pretty sure you'd have to take the manifold off, because I couldn't even get at it from the bottom.

[Bluevitz-rs]

It's so easy to get at from the bottom. Just take the starter off. It's two 14mm bolts.

[pimp my yaris]

If U removed the front bumper cover witch is pretty easy and then U removed the plastic shroud that is to the left of the radiator [two plastic clips hold it in]. You will be able to get it from the front very easily. Wide open working conditions. If your installing a intercooler U will need to remove the bumper cover anyway. You will need a 24mm deep well socket to remove the sensor.

[1.5ty]

thanks again guy right now i have a turbo kit on the was ill let yall know how its going