1.3L Blitz Compressor?

[Sleepwalker]

Is it possible and if so, anyone have improvement stats?

[cdydjded]

What is the engine code of you motor? Example: 1NZFE

[Sleepwalker]

I honestly do not know. I have an Australian 2010 1.3L Yaris YR Hatchback, if that is helpful at all?

[cdydjded]

A little, somewhere on your car it should say what the code is. There are 3 options:
2NZ-FE
2SE-FE
1NR-FE

[xbgod]

I have a Blitz S/C in a box that I used for a while. I machined a new pulley at the shop a little smaller for more boost and also made it direct drive. I no longer had to use it as clutch on/ off type anymore.

XBG

[Sleepwalker]

A little, somewhere on your car it should say what the code is. There are 3 options:
2NZ-FE
2SE-FE
1NR-FE

Any idea exactly where on the car this would be located? I'm assuming somewhere in the engine bay.

[1.5ty]

yea it should be the plastic cover on the top of the engine or some are on the intake

[ruimond]

1.3 would be the 2NZ-FE. I've got the a 2006 YR which is the 1.3 in Australia.

[blacksandiegovitz]

I have a Blitz S/C in a box that I used for a while. I machined a new pulley at the shop a little smaller for more boost and also made it direct drive. I no longer had to use it as clutch on/ off type anymore.

XBG

^^ You trying to sell the supercharger set-up ???

[sleey0]

I have a Blitz S/C in a box that I used for a while. I machined a new pulley at the shop a little smaller for more boost and also made it direct drive. I no longer had to use it as clutch on/ off type anymore.

XBG

How did you convert the blitz from electric clutch to fixed?

[henry33]

he can also have 1NR-FE engine. sleepwalker what is the stock hp ?

[xbgod]

I took away the electric clutch plate completely. Got a new sealed bearing, made a pulley, hardened it and anodized it blue. Then just put the bearing back in to the pulley and reassembled.

I still have the stock set-up incase I ever get rid of the thing. Including the Blitz engine managment. I even had a waste gate welded into the Plentum incase of to much PSI on a stock set-up.

It's a pretty cool set-up I got this Supercharger in 05 when I had friends over at Blitz, before they sold to some other company and moved that office back to Japan.

Even the top part that connects to the T/B I had chromed, It's a bad-ass one of a kind S/C.

Can't show you pics untill I get home in about 28 days.

If I sell It, it would be for 500.00 as is. And you would be responsable for all the mods or converting it back to the stock Blitz set up

XBG

[sleey0]

Can your setup be used for the 1.5L Yaris or is it the same one?

I would be VERY interested so please pm me!!!!!!!!!!!!1

[blacksandiegovitz]

I took away the electric clutch plate completely. Got a new sealed bearing, made a pulley, hardened it and anodized it blue. Then just put the bearing back in to the pulley and reassembled.

I still have the stock set-up incase I ever get rid of the thing. Including the Blitz engine managment. I even had a waste gate welded into the Plentum incase of to much PSI on a stock set-up.

It's a pretty cool set-up I got this Supercharger in 05 when I had friends over at Blitz, before they sold to some other company and moved that office back to Japan.

Even the top part that connects to the T/B I had chromed, It's a bad-ass one of a kind S/C.

Can't show you pics untill I get home in about 28 days.

If I sell It, it would be for 500.00 as is. And you would be responsable for all the mods or converting it back to the stock Blitz set up

XBG

^^ Sent you pm yesterday about the superchareger , and if you'd really sell if for 500 I'll send you paypal asap . Let me know

[xbgod]

As long as you have a 1NZ-FE motor it will fit. Heres a pic from blitz

XBG

[Yoda]

i sent you a pm about the SC. If you decide to sell make a thread in the for sale section you will get lots of bites

[cali yaris]

That is a STEAL. someone get it like YESTERDAY. :clap:

[blacksandiegovitz]

That is a STEAL. someone get it like YESTERDAY. :clap:

^^ Yeah Garm , I'm already on this :thumbsup: