Cruise Control on 2010 Canadian Manual

[Kaya B.]

Hello,

I want to install Cruise Control on my 2010 Canadian Manual.

I want to use original parts. My car has electronic tachometer.

What is the procedure for finding the right parts for my car?

I looked at PeteZNY's topic at http://www.yarisworld.com/forums/showthread.php?t=23510&highlight=cruise+control

But i don't know does the same parts work for me.

I looked at my tachometer with a bright light. I can see the lights for the accessories i never used. (they don't light but they appear under bright light) but I couldn't see the cruise control lights.

I looked at CTScott topic for Cruise Control FAQ at http://www.yarisworld.com/forums/showthread.php?t=25515 but i'm not sure if cruise control works for me because i couldn't find the cruise control lamp.

I'll be glad if you help.

Thanks.

[Kaya B.]

Hello again,

I found 84632-34011 on ebay, and just ordered it.

I couldn't find other parts at the moment. I'm searching.

[Kaya B.]

Hello,

I just disassambled my tachometer to see the lights but I don't have the cruise control lights!

my tachometer photos are attached.

and I'm attaching the connector photos.

[CTScott]

It definitely won't work on yours.

Your car is not a Canadian one - Based on the wiring and the cluster, I would suspect that it is a European one.

[Kaya B.]

It definitely won't work on yours.

Your car is not a Canadian one - Based on the wiring and the cluster, I would suspect that it is a European one.

Hello,

I bought it brand new. It is the LS package. Built for the Canadian market and sent to Turkey. Differences from Turkish model are; heated seats, bluetooth, manual rear windows, daytime running lights and no start&stop system.

I'm sure it is Canadian. And I've already purchased the cruise control stalk :(

Also; authorized dealer asks for 250$ to install cruise control.

[WeeYari]

Canadian market does not get the digital cluster.

[Kaya B.]

Canadian market does not get the digital cluster.

oh :(

so what shall I do?

[WeeYari]

oh :(

so what shall I do?

Outside of my knowledge and experience. This is where I go :iono:

Sorry

[CTScott]

If you PM me your VIN, I can run it through the international EPC and figure out what market your car is actually from, but just having the digital cluster and the wiring for steering wheel audio controls means that your ECM does not have the cruise control functionality.

[Kaya B.]

thanks all.

I learned that the LS package cars came especially digital cluster because there were no analog clusters in Turkey.

they came with another package in the half of 2010 called terra sporty

[henry33]

Scott will check also my vin ? please

[CTScott]

thanks all.

I learned that the LS package cars came especially digital cluster because there were no analog clusters in Turkey.

they came with another package in the half of 2010 called terra sporty

OK - I received your PM with you VIN.

Your Yaris was made in France (in the TMMF plant) in December of 2008. It is a European Terra Type. So, no easy cruise control for you.

[CTScott]

Scott will check also my vin ? please

Sure - PM me your VIN.

[Kaya B.]

OK - I received your PM with you VIN.

Your Yaris was made in France (in the TMMF plant) in December of 2008. It is a European Terra Type. So, no easy cruise control for you.

thank you Scott.

I'll research what i can do.

any advices where to start?

[CTScott]

thank you Scott.

I'll research what i can do.

any advices where to start?


Check out the link below. This Belgium based company makes an aftermarket CC for European Toyotas:

http://www.el-pas.com/products.htm

[CTScott]

Scott will check also my vin ? please

Yours, like Kaya's was built in France at TMMF, and is a Terra Type. The build date on yours is January, 2010.

[henry33]

where or how you check this ?

[henry33]

Yours, like Kaya's was built in France at TMMF, and is a Terra Type. The build date on yours is January, 2010.
in other words no cruise control :cry:

[Kaya B.]

Check out the link below. This Belgium based company makes an aftermarket CC for European Toyotas:

http://www.el-pas.com/products.htm

thank you. I've sent mail to them.

Also, I'm talking with the authorized dealer. they say they can make...

[CTScott]

where or how you check this ?

I have copies of the US, European, Asian, and general market electronic parts catalogs. They have the ability to decode the VIN and give the details on the car.

[Kaya B.]

my cruise buttons arrived.

i don't know if it will work. the authorized service says we'll try :)

is this the right buttons? the right connector?

and it has a wire at the back of it. is it normal so is this original?

i bought it from ebay as "brand new oem" at this item http://cgi.ebay.com/ebaymotors/TOYOTA-CAMRY-YARIS-COROLLA-07-08-09-10-CRUISE-CONTROL-_W0QQcmdZViewItemQQhashZitem27b4b8cf49QQitemZ17053 5735113QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

[CTScott]

It's the correct stalk, but it won't work on your car...

[Kaya B.]

It's the correct stalk, but it won't work on your car...


Thank you Scott. I'll just try. because if it doesn't work i won't pay for other parts. But if it works i have to pay about 100$ so I need some time :)

I will give you info. Thanks for your helps.

[CTScott]

Thank you Scott. I'll just try. because if it doesn't work i won't pay for other parts. But if it works i have to pay about 100$ so I need some time :)

I will give you info. Thanks for your helps.

Start by measuring the voltage on pin 40 of connector A21 on the ECM, with the ignition on, but the engine off. If it measures 12 V, then it it worth a shot, if it doesn't, then stop there.

[Kaya B.]

Start by measuring the voltage on pin 40 of connector A21 on the ECM, with the ignition on, but the engine off. If it measures 12 V, then it it worth a shot, if it doesn't, then stop there.

thank you. i'll try this.

[CTScott]

Since you are willing to experiment and put some money into trying to get cruise control on your car, another option, which I believe will work on the European Yaris, is the Rostra aftermarket cruise control kit.

It is quite a bit more work to install, but it overrides the gas pedal signal itself, rather than requiring that the ECM do that. The European Yaris uses the same 6 pin connector on the accelerator pedal, with the same pinout as the US one, which is why I think that this should work.

There are two versions for the Yaris - An A/T kit ($209) and an M/T kit ($249)
http://www.thecruisecontrolstore.com/ez-catalog/X380183/0003
(http://www.thecruisecontrolstore.com/ez-catalog/X380183/0003)