Turbo setup

[1.5ty]

Well I got my turbo setup on my car aem fic is hooked up but I think I may have fucked up on the turbo car runs and is ok but I can't hear the turbo spool up it is a t3/t4 with a 55 trim compressor and a 58 trim turbine am I missing any thing or do I need a smaller turbo

[Focus_Sh1ft]

...More info?

If you messed up the FIC wiring, the car most likely wouldn't even start.

[1.5ty]

When I use the jumper wire it works just fine spools and everything so there something I messed up but till I get back to pa and get the wiring redone and on the dyno I'm just going to try and stay put of boost :( but I'll keep y'all up to date if you wanna is my set go to my Facebook.com and look up my email drifter704@yahoo.com and add me as a friend and it well lost you see some pics

[sleey0]

Just sent a friend request to you.

My name is Wes. Also sent you a pm!!!

[severous01]

ok, i quit reading when i couldnt tell when one sentence ended and another begins. that was about 20 words into it and then i figured out i was wasting more time trying to determine where to stop reading a sentence and start a new one and then decided that it wasnt worth my time

good luck with life...hope you dont do this for your boss

[1.5ty]

This is my turbo setup

[sleey0]

Did u build the kit yourself?

Where did you get the piping, etc?

Looks good bro!!!

[1.5ty]

Got it all off ebay I know people hate on ebay but hey the have never let me do but
Yeah I did all the work on my own took about a week to get everything right
It was worth every min of it

[Nexus1155]

whered you get the manifold? Thats how essentially I want mine, but A. I do not want to cut the wiper cowl if thats what you did or B. it looks like a bitch to make a downpipe or get to ECU.

[1.5ty]

Igot it from eBay Right off hand I can't remember where when I can I'll post a link
I didn't have to cut the wiper cowl it sit about 2" down from it
The turbo I used made me have to move the ecru in the cabin along with my aem fic
For exhaust I had a shop make a custom 2 1/2" exhaust front to back so I really don't know how bad it was
And it really matters what turbo you get for how to make the down pipe mine is a v band turbo so I just bought the 90 degree v band down pipe and the shop worked from that

[1.5ty]

03-06 SCION XB XA 1.5L CAST T25 TURBO EXHAUST MANIFOLD
That is the link for the manifold like my setup

[sleey0]

Could have bought the manifold from Garm:) lol

Is ur turbo a 3 or 4 bolt?

AND can u still use AC?

[1.5ty]

It is a 4 bolt mani exhaust is a v band clamp with a t3/t4 turbo like mine no a t25 maybe idk

[pimp my yaris]

Do you still have A/C lines? I thought about getting that manafold and turbo set up, but I was worried about A/C line clearance. I decided to go with a bottom mount. Get some heat wrap for that hairdryer and it will keep things much cooler under the hood. O ya, and big props too :w00t:

[1.5ty]

With the turbo I used I had to lose the ac