Yarisworld.com DIY Manual v3

[vodkalush]

The long awaited () DIY manual v3 has finally been "completed"

What is it:
A collection of all the Yarisworld DIY's that I could find, put together in a nice PDF "book". I have given credit to all orig authors, there is link to user profile from each entry in the book that was created by them. I have also gone through and tried to correct all spelling and grammar errors that M$ Word could find.

Link:
http://www.esnips.com/web/yarisworld/
(all older versions of the book are avl. for download. v3 is the newest) - 9.2Mb PDF File

Contents:


-----------------------FYI Basics on car stuff Facts etc------------------

----------------------------Audio/Visual------------------------------------
3dr Speaker Install
Change Radio/Radio LCD Color
Lift-back Rear Speaker Installation
Replace Stock Stereo Deck
Replacing Front 6.5 Speakers (LB/Sedan)
Replacing Rear 6x9 Speakers (Sedan)

-------------------Bodywork, Painting, Exteriors, Wheels--------------
De-badge Your Rear End
Hatch-back Spoiler Install
Headlight Housing Color Change
Tint/Vinyl Your Tail Lights
Undercoating Your Inner Wheel Wells

--------------------Brakes and Suspension/Handling--------------------
DF210 Spring Install
Strut Tower Bar Install
Type 1 Lower Bar Install

------------------------Interior Modifications-----------------------------
30 sec Door Removal
Back Seat Removal
Big Foot Mod
Custom Trunk Liner
Remove Door Panels
Remove Door Panels (pics)
Tach Installation

----------------------Lighting and Electrics-------------------------------
Add Remote to Factory Keyless Entry
Center Control Knob Color Change
Change Your Gauge Cluster Color (sedan)
Disable Daytime Running Lights
Disable You Seatbelt Alarm (on/off switch)
Discreet Mounting of 12v Adapter
HID installation
Power Outlet Mod
Power Rear Hatch

--------------------------Other & Maintenance----------------------------

--------------------------Transmission & Performance-------------------
Install Grounding Kit
Megan Header Install




Extra Info:
I have also included a link to the user profile as well as a link to the orig thread in both the Table of Contents and at the top of each DIY. Along with that I have included a crappy little intro page, a "thanks" section, and also an empty "F.A.Q" section.

an questions or comments about the ways its setup please let me know and I will edit accordingly.

(below are two screenshots)

[the_saint]

Awesome!
What's your address, I'm going to mail you a 6-pack!

[YarisBueller]

Very nice! :thumbsup:

[VitzBoy]

That is just plain awesome. Thanks for putting that together! We have the best members.

[vodkalush]

Will be accepting 6packs and handles of vodka :smile:

Like I said, please post any new DIY's or how-to's and I'll update the book as needed :thumbsup:

[BMGYaris]

heck yea, time for me to get on some of mine:) id like to get into that there book:), awesome job man.

[the_saint]

Hey Mr. Mod, you should sticky this...maybe in the DIY section.

[vodkalush]

haha, why I think I may just do that :thumbsup:

[Hocc]

good one ! Very handy !

[VitzBoy]

Please refer to the sticky'd thread going forward. Thanks!

http://www.yarisworld.com/forums/showthread.php?t=2295

[vodkalush]

FYI: I'm going to be listing what new additions to the "book" in the 1st post, please make suggestions (threads and ideas)

Also the next release will have links to the orig thread of the DIY

[vodkalush]

updated 1st post, and and hoping to have the updated manual finished by the first of next week.

[vodkalush]

I am putting together the new version now. I just have to finish reading an "Acrobat How-to" guide I found the other day so I can attempt at creating:
Links to the site, and hopfully even a Clickable contents directory. any updates will be posted here. 

-vodka

[keesue]

Outstanding effort...much appreciated!

[punch]

Nice work and your welcome for the pics?

[Chris07LB]

Lots of great DIY material there.. keep it up guys. :thumbup:

Dont forget the Megan Header DIY as well.

[vodkalush]

yes, thanks to all that have contributed. I have just finished creating all the "new" DIYs and have edited all the past ones to include a link to the orig thread. I however had to work off old files, and will have to run spell/grammar check on all the articles again... but oh well.

And I did figure out how to create the "Clickable" Table of Contents; so that will be included. I will also most likely put a "DIY link" page at the end of the article. And lastly I have edited the "welcome" page; edited size of pic, create a link to the registration page as well as a link to the forums.



If anyone have any ideas on what should be added/removed please let me know asap so I dont have to do it later :smile:

[eflb55]

hm.... yaa.... :bow:

[vodkalush]

:smile:

[H8SGAS]

:clap: yet another awesome job!!!!!:clap:

[acrbill]

That is really nice man. It was very nice of you to take your time and make something so user friendly. I have been on car sites that have existed for over 10 years and they did not have info as organized. Its great that we already have a base to add to as more info becomes available.

[jimcat]

:bow: Great thanks

[Blenjar]

:D

-- Blen

[johnnyfive]

just curious, but why not just do one stickied post, with internal forum links to the threads, would be easier to update, and would be easier for someone to quickly find the information they are looking for, unless they always keep an updated version of this PDF at the ready...and if they are away from their main computer...

just an idea, and heres a link to a sticky that i think does what i am suggesting fairly well, over on VWVortex.com http://forums.vwvortex.com/zerothread?id=585949

not knocking your book, you did a nice job, but i think a well maintaind sticky here would be a wonderful suplement to the guide ;)

[vodkalush]

I do like that, it would be easier for when you are in the forums looking for stuff.... I really like the "Category" view.

It be easy to modify the orig post to a category view style linkage and on the new updated version of the book I'll switch to a category still organization.

As far as the reason for the PDF, well its simple I hated having to print out guides from the forum page view (even in single post view) so the PDF makes it simple (for me atleast) to print, and i like that fact that its more of a "hard copy"

Thanks for the suggestions, I'll def be making changes to the first post.

[91drggndime]

I have tried downloading this, but when i goto register for the site to download it, it tells me my letters i had to type are not right, yet they are all perfectly clear.. i gave up at 20 mins.

[vodkalush]

ummm

you shouldnt of had to register to download....

I'll check it out... this reminds me that i still have to update the first post...

[vodkalush]

i just downloaded the manual, no issues. and I wasnt logged in.

however I have had some issues in the past, try deleting your temp internet files, and clearing your cookies...

[91drggndime]

when i click on download, a screen pops up that says 'please sign into your escript (or whatever that site is) account'.. and that's me clicking the link here, then clicking on the DIY v3 link, then clicking download.

i just cleaned it all out and same problem.

[hasher22]

No probs at my end.....i can download it without signing up

[91drggndime]

i finally got it to take my registration, so i'll just download it that way. no clue why it wouldnt let me.. ohhh weeellll

[fbi114]

could not thank u enough...



Thankx m8

[vodkalush]

just got my version of acrobat working again ( i think :) ) so I should be having the updated DIY Guide done in the next week or so

[MrJester]

When is v4 of the manual coming out???

By the way here is another download location for the v3 manual and othe Yaris info so enjoy everyone.

http://public.box.net/hays28240

[somlim]

Thanks for this man, helps in heaps

[vodkalush]

yah, this reminds me...

let me see if I can find those back-ups files..........

[xerophinity]

Just checkin' in to say thanks for putting the time into this Manual.

[vodkalush]

Well no luck with finding my back-ups I've gone through 3 hard drives and a shit load of back-up dvds and usb drives... all with no success. sooo I'm gonna bite the bullet and rebuild it from scratch again....


so if anyone wants to help me take the DIY post and convert them into word docs, let me know (it's the longest part - running spell check and fixing obvious grammar mix-ups)

I'll keep you updated as I am once again actively working on the next DIY edition

ps
If my DIY thread is missing anything feel free to let me know (I will also be looking for new ones, but extras eyes never hurt)

[Kaotic Lazagna]

i'll be making a DIY spoiler install for the sedans later today. you can add it if you want.

[QTvDWGbziqGjbkb]

nice one compilation vodka... I saw another nice DIY for a CAI. In case u wanna add it.

[vodkalush]

Would anyone be opposed to me creating a standard layout for the DIY's and then simply shifting the content around to fit the standard? I would of course keep a link to the original thread and a link to the users profile atop the DIY in the manual...

I havent put together the layout yet, I'm trying the gauge the overall love or hate for the idea.

[Solid T D]

Great work on the DIY guide.:bow: The pictures are awesome! I just have one problem with it.:eek: I need to take my door panel off my 3dr to change the speakers and there's a hand crank in the way.(non-powered windows) Any suggestions on how to remove it?:iono:

[yarisugi]

Great work on the DIY guide.:bow: The pictures are awesome! I just have one problem with it.:eek: I need to take my door panel off my 3dr to change the speakers and there's a hand crank in the way.(non-powered windows) Any suggestions on how to remove it?:iono:

There is a little "C" clip that's holding the handle to the crank. Cut a strip of old t-shirt about a foot long and 2 inches wide. Grab the ends of the strip. Slide the strip behind the neck of the window handle and wiggle it back and forth until the C-clip pops out. Remove the window handle.

To re-install it, put the C-clip on the handle before you reinstall it to the crank. Then pop the handle back into the crank.

[highwaypass]

very nice! :headbang:

[severous01]

or get a $2 window crank tool at autozone and not worry about rippin up any clothes...and being able to do it right with the right tools...

what i do is put in a plastic panel tool and roll the window in the direction the same side the tool is on...it seems to roll the clip out if you can hold the tool good enough. the tool is thick enough to push the panel out of the way so u can see in there.

[andylin]

hehhe,
nowadays DIY will spend your more money.:w00t:

[viosNGV]

Thank you ^_^

[702852]

Hello, new to this forum and I clicked on the link for the DIY v3 manual and am brought to another page. The file loads, but the download button is grayed out.

How can I download the file??

Thank you all

[KrazyDawg]

Is there a way to download the PDF without installing eSnips. It looks like spyware.

[Pingouin]

Nice, thanks. I used the directions to dismantle my windows switch consoles as these were filthy (previous owner, not me!).

[Pingouin]

Is there a way to download the PDF without installing eSnips. It looks like spyware.

Got my copy from Rapidshare:
http://rapidshare.com/files/97811149/Yarisworld_DIY_Manual_v3.pdf

Dug out by googling the PDF file title!

[fnkngrv]

Can we have someone volunteer to create a new version with all of the new DIYs added? I would do it myself however I suck at hyperlinking within a pdf. If someone can take care of that part I can build the starting doc.

[Chris Goss]

THANKS : )

[09sedan]

can anyone post up a pdf of just the speaker replacement for the front and rear for a sedan? :)

[09sedan]

your filehost sucks. keeps redirecting me to download some sketchy download accelerator programs. any chance you could email it or attache it to a pm to me here so i can upload it to fileserve?

[watersoilair]

Yeah I noticed the same thing here...pls share with 09sedan so that he/she can upload! I don't have a clue on how to do that!

[Revsson]

Have you tried over on Microimageonline?
http://www.microimageonline.com/forums/showthread.php/4232-YARIS-FILES

just like this forum, it is free to register.
http://www.microimageonline.com/downloads/YARIS/Repair%20Manuals/Audio%20Visual.pdf
something like page 159 of the above pdf.

[Driftw00d]

Where can I find the file at? The link isn't working.

[Revsson]

Where can I find the file at? The link isn't working.

Which link is not working for you? :iono:

[Solid T D]

This is a creep host site. Where is the download?

[Blazeblue]

This is a creep host site. Where is the download?

Try this. http://www.directtechsupport.com/yaris/yarisworldrepairmanv3.pdf

[Capsat]

am looking for engine manual for 1SZ-FE if someone can share link for download, i need it to identify the timing marks on VVTI before head removal. Thank you

[CMKfromOZ]

I can't seem to get the "Offical" YarisWorld.com DIY Manual using the hyperlink at the beginning of the post.
http://www.esnips.com/web/yarisworld/

are there extra words required to make it work?
thanks

[evastears]

Link doesn't load. Does it ? http://www.esnips.com/web/yarisworld/

But ok, i just saw that latest link over there. Thanks. That is great !

[Lars]

Can someone share this please? I tried all the links, none work!

Thanks :)

[WeeYari]

That hosting site died ages ago.

Register on microimageonline.com, which is owned and operated by cali_yaris, and there you will find the most comprehensive set of manuals.

There is also this thread http://www.yarisworld.com/forums/showthread.php?t=365

[Old Dude]

Hi Vodkalush, sure would like to dowload DIY manual, but esnips has messed up my computer before and I won't touch it again. Bummer,,,,,,,,,,,,,,

Any other way of doing it?
Thanks

[WeeYari]

Vodkalush last logged on Oct 1, 2007. You won't raise him. Anything specific you are looking for?

[WeeYari]

Here is a working version of it

http://docs4.chomikuj.pl/383085195,PL,0,0,Yarisworld-DIY-Manual-v3.pdf

Don't expect to get a huge DIY document. It is essentially a list of links back to a thread here. That being said, many of the threads are old, and any pictures may have been provided by a file sharing site and are now dead.

[Lars]

Here is a working version of it

http://docs4.chomikuj.pl/383085195,PL,0,0,Yarisworld-DIY-Manual-v3.pdf

Don't expect to get a huge DIY document. It is essentially a list of links back to a thread here. That being said, many of the threads are old, and any pictures may have been provided by a file sharing site and are now dead.

Is it just me or do you have to pay to download that pdf? :confused:

Anyways thanks for the help WeeYari. I had already looked into the thread you said, I was just looking for a way to have them offline so that I can take it on my laptop to the car. But I guess I can always do a quick manual myself from the threads.

Quick question though, is there a guide to tear down the A pilar? Where the front tweeter is? I bought a 2 way speaker combo with a tweeter, I'd like to know how to switch it with the stock one without breaking it :rolleyes:

Thanks again!

[konnayi]

It is so interesting! I like DIY very much! Haha. I hope you post your DIY works here. And thank you very much for your posting.

[Mel]

Can't download manual :confused:

[ajkochev74]

I'm also looking for this file, OP and later links are not working.

[hero]

me too,
appreciate if you post a new link to this manual.

[btz]

Also please and ty!

[Rocketyaris]

Me Too!!
Thanks

[cherryonion]

Me too! :)

[rey.abc]

looking for the file as well, link is brooken

[ribbyramone]

Could anyone re-upload this, please?

[Kdaddy81]

I could use a copy too (08 Yaris sedan)

[Rocketyaris]

me too!

[tmontague]

I have the manual all saved by chapters, if someone can tell me how this can be uploaded please let me know and i'll do it

[mohammedalee]

I have the manual all saved by chapters, if someone can tell me how this can be uploaded please let me know and i'll do it

Upload it to any file sharing website like mediafire or even google drive or skydrive. There are plenty of them on the corner.

[alloy]

Found the OP file yarisworldrepairmanv3.pdf
Luckily Archive.org saved a copy of it.
Find it here: https://web.archive.org/web/20131010070420/http://www.directtechsupport.com/yaris/yarisworldrepairmanv3.pdf

[ferdiestolt]

how to download?

[quazisayeed]

Thats great. i just download it from the archive.org link. by the way do anyone in the forum have 2011/12 repair manual?

[Coreywall]

Is anyone else having issues with the link? http://www.esnips.com/web/yarisworld/

[07liftback]

Found the OP file yarisworldrepairmanv3.pdf
Luckily Archive.org saved a copy of it.
Find it here: https://web.archive.org/web/20131010070420/http://www.directtechsupport.com/yaris/yarisworldrepairmanv3.pdf

NICE, I can confirm this link is still working. This should be added to wiki of the thread if we had one. Maybe I'll save it and host it somewhere else too and make another thread for it.

[koketautogarage]

Hi everyone, I have the repair manual hosted on my server, but i cannot post the link here(I don't know why), so PM me for the link.

[TYaris2010]

Hi everyone, I have the repair manual hosted on my server, but i cannot post the link here(I don't know why), so PM me for the link.

Hello. I sent you a PM with my email address to receive the PDF file.

Thank you.

[Ulrik]

Links not working

[Mecheng46]

Has anybody still have a copy of this manual to send it to me please?

[Ausecho]

Broken link ��

[Distracted Guy]

I'm looking for the manual... someone must have it.

[dariel]

Hi, found the manual, its great, but it's up to 2009 models for my opinion.
Does anyone has something newer ? say for 2016 mayby ?
Thank you

[JDJanitor]

I could use 2016 too

Sent from my SM-T380 using Tapatalk

[LikeCaseyJones]

Need new link! ��

[mannycheckers]

Need new link! ��

Here is a link to a copy of the pdf:

http://s000.tinyupload.com/index.php?file_id=70439570065763767989

Sometimes you have to visit the internet archive or wayback machine to view old pdfs.

[KermitAUS]

Anyone have a link that works please?

http://s000.tinyupload.com/index.php?file_id=70439570065763767989

Is dead :(

[Snowball]

The v3 manual can be found here :

https://www.scribd.com/doc/6995469/Vios-Yaris-07-DIY-Manual


It should also be available here :

https://u.pcloud.link/publink/show?code=XZB4lmVZBfjleW09wLY4w33fUsWLD5uR7ai7

[Martin Bruce]

Various Toyota Manuals here: no registration, free downloads

https://www.auto-manual.com/toyota/

[KermitAUS]

Anyonr have alink that works?

This site can’t be reachedCheck if there is a typo in www.esnips.com.
If spelling is correct, try running windows network Diagnostics.
DNS_PROBE_FINISHED_NXDOMAIN