Netz emblem for Sedan?

[jizan]

Hi, as the first mods for my 2010 Yaris Sedan,
I am planning to replace Toyota emblem with Netz emblem.
But seems like most of the Netz emblem wont fit on the sedan.
Does anyone know where I can get the Netz badge for sedan?

[cali yaris]

I don't think anyone makes them; I haven't been able to find a supplier.

[jizan]

http://yaristrd.monchar.com/

if you go to the link you can find the front badge mod for the sedan.
i just don't know where to get it..

[kimona]

Unlike the Yaris HB (Vitz), the Yaris sedan (Belta) is not sold by Toyota's Netz division, so the emblem is not intended for the sedan.

[JumpmanYaris]

Unlike the Yaris HB (Vitz), the Yaris sedan (Belta) is not sold by Toyota's Netz division, so the emblem is not intended for the sedan.

This ^

[why?]

So is the Belta just a Toyota? Wow.

[JumpmanYaris]

So is the Belta just a Toyota? Wow.

Si thats what they call it in Japan and some place ealse

[kimona]

The Vitz and Belta are both Toyotas, but the Vitz is sold by Netz and has the Netz badge up front and the Toyota badge on the hatch. The Belta has the Toyota sombreros front and back.

Except for platform and drivetrain, the two cars are entirely different and quite seperate design projects, sharing very few components in common. The Vitz was designed in Europe and Belta in Japan. Why Toyota chose to sell both cars as the Yaris in export markets is a real mystery.

[kingbobby83]

Soooo..no rear emblems for the sedan....FAIL!

[cali yaris]

^ You can put a rear Netz emblem on the sedan, it just doesn't officially belong there. (It doesn't officially belong on the rear of the Yaris liftback, either).

You also have to put something underneath the emblem to cover the holes (since the size is slightly different).

[kingbobby83]

I thought the rear was on by 3m or something similar...it has holes also?

[CAyaris]

So what us sedan people need to do if interested in switching emblems is to change it to belta to be accurate?

[WeeYari]

^ Toyota Belt Buckle badges front and back, remove YARiS and replace with Belta.

[cali yaris]

I thought the rear was on by 3m or something similar...it has holes also?

Yes, two small holes on both models align the rear emblem. It's affixed with double sided tape.