DIY Ebay Projector Fog Lights?

[advocate]

Been searching all over for an install guide for these.

Here's the kit:
http://cgi.ebay.com/ebaymotors/YARIS-3DR-OEM-STYLE-HALO-PROJECTOR-FOGLIGHTS-FOG-LAMP-/180579665449?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AYaris&hash=item2a0b630629


Anyone know how to install these? Seen a guide on it?

[advocate]

sounds like I need to cut up the wiring harness on the engine bay side. there's a lot of wiring going on there. there's definitely a relay as well.

other fogs just had simple wires running to em

[big lo]

I think fngravy has the same set up, if you have fogs installed it would be easy and the kit come with all wiring cool set up nice find

[fnkngrv]

I didn't have to cut anything. I did splice into my parking lights for the fogs however the rest plugs into the factory stalk. I spliced the switch into my 12v that is in my armrest. Not sure where yours would be on the LB tho.

[advocate]

I'm not sure what you mean by 'factory stalk'.

There's two sets of wires on each fop lamp. I don't see any wiring near the fog light area of the bumper that I can possible splice into. Two of the four wires per lamp are extremely short.


Picture:
http://img338.imageshack.us/img338/7421/imag0156resized.jpg


So I don't see where those two super short wires are going to tap into since I don't see any wiring that close to the fop lamp position. Also, I don't seem to be getting power to the main fog lamps with my old wire from the fuse box in the engine bay. I think the relay is interfering?


I have everything set up from a previous install of fog lights I just need to transplant this pair in.