Transformed Vitz...

[Daddie Y]

"Stock Bumpers with Custom Made Wheels"
Widened Steelies

Rear: 16X10 (215/40/16)
Front: 16x8 (205/40/16)

[ERA]

duuuuuuude.

nice!
i like what youve done.

[ROCKLAND TOYOTA]

looks GREAT and im loving the hood!!! im guessing its wrapped???

[Daddie Y]

duuuuuuude.

nice!
i like what youve done.

Thank you!!!

[Daddie Y]

looks GREAT and im loving the hood!!! im guessing its wrapped???

Thank you!!! The hood is painted. I did it myself.

[Daddie Y]

So how much fender work did you have to do?

No fender work at all.

[cali yaris]

Where did the steelies come from? Yaris stock steelies aren't 16".

Looks GREAT. :clap:

[Daddie Y]

Where did the steelies come from? Yaris stock steelies aren't 16".

Looks GREAT. :clap:

Thank you!!! It's all custom...

[hatchbackkid82]

Looks good man I like the rims, I would get them. How much did you end up spending on them?

[Daddie Y]

Looks good man I like the rims, I would get them. How much did you end up spending on them?


Thank you!!! I didn't pay. It was all sponsored by a shop. I was their first Yaris to do 16x10 in the rear...

[hatchbackkid82]

Lucky you. Looks good I've seen a few miatas with widened steelies and it looks good, i like the way it looks on your car:drool:

[marlondog]

16x10 in the rear? That azz must be looking hella phat like a BMW Z3 M Coupe! Can we get a photo of dat azz?

[PETERPOOP]

HOLY COW.

[leeman]

wow. never thought that 16" look that amazing. what offset did you have?

[kimona]

Always liked widened steel wheels. Did that on my Mini. White goes very well on your car. Rear stretch doesn't work for me.

[Daddie Y]

16x10 in the rear? That azz must be looking hella phat like a BMW Z3 M Coupe! Can we get a photo of dat azz?

lol.

[Daddie Y]

HOLY COW.

Thank you!!!

[Daddie Y]

wow. never thought that 16" look that amazing. what offset did you have?

Thank you!!!

[Daddie Y]

Always liked widened steel wheels. Did that on my Mini. White goes very well on your car. Rear stretch doesn't work for me.

Thank you!!!

[BrazdonW]

Soooo... I'm not usually a fan of Euro styled cars anymore.. but i must say that this has swayed me a little.
i like the fact that you didn't go super dished with small wheels. the fact that you took it away from that typical Volkswagen styling but kept it euro looking makes it that much better.

good job :)

[solarVitz]

it was nice meeting you Peter last sunday at Autofashion's VIP meet. love everything about your car. one of the nicest yaris ive ever seen.

Noel

[BrazdonW]

if you ever get those sakuras on your car solar you will have the nicest yaris by default

[solarVitz]

if you ever get those sakuras on your car solar you will have the nicest yaris by default

Haha, thanks bro. if they offer 4x100 i dont mind getting them. im pretty much would want them for my AE86. but only in my dreams.

as of right now, theyre 84000yen per wheel in japan brand new. thats like $1018 per wheel = $4072 for 4 + tax and shipping :eyebulge:

maybe when i win the lotto then i wont have second thoughts on buying them.

[BrazdonW]

i mean... i've seen people put money into way worse things lol.
those wheels are legendary.
they belong on any car... but mostly a first gen skyline ;) imo

[Daddie Y]

More pics!

[marlondog]

Wow! Who died and gave you the Matrix to lead the Autobots, Hot Rod?

[blacksandiegovitz]

Looks damn good peter ! Kicking myself for not going out to autofashion that day like I had planned then I could of seen this in person. Btw I think i got a stock toyota front logo you can have if you want...

[Flipper_1938]

!

[TrashCan Monster]

makes me want a creamsicle

[coheed]

Offset???

[Yaris4ever]

Just wow, looks awesome mate!!!!!!!

[Daddie Y]

Thank you, everyone!!! More pics: http://www.teamvitz.com/risa-omine

[Daddie Y]

Looks damn good peter ! Kicking myself for not going out to autofashion that day like I had planned then I could of seen this in person. Btw I think i got a stock toyota front logo you can have if you want...

Thank you!!! I will let you know about the front logo. I am working on getting one custom made, as we speak...

[Daddie Y]

Offset???

It was all custom made by measurement, no fender work at all.

[JBougie]

I want to touch it.

[Daddie Y]

Wow. You really dont wanna let people know the offset do you? I have asked 2 times and at least 1 other person is curious. You could you know...help someone out and share some information. But yeah. :-\

I don't even know the offset nor the shop I did it at. They don't go by offset, it was all done by measurement. They do things old school.

I can find out the offset by measuring and calculating it myself, but why should I go through the hassle. I am happy with my set up.

[Daddie Y]

I want to touch it.

lol...

[aucorium]

AWESOME AWESOME AWESOME !!! i love it ! great job !!

[ardianpradana]

nice car dude
first time I saw yaris with 10 width wheels
:biggrin:

[1.5]

I am interested in widenning stock steelies too how much did it cost for the shop to do this?

[Midnight Drifter]

More than you can afford, pal. Toyota.

(joking aside though, that looks like no cheap stretch-and-tuck. I'm guessing over $1600. D: )

[1.5]

yea the drop and tires and camber im good on im just interested in having a shop cut and reweld my stockies but if its cheaper to just get new wheels then ill hit up diamond or something.

[cali yaris]

^ check out Paolo at Simple Wheel Werks, he's really good at it.

714-725-4445

[blacksandiegovitz]

^ check out Paolo at Simple Wheel Werks, he's really good at it.

714-725-4445

^^ Yeah I think Imma have him re-barrel my back ssr wheels from a
6.5" to 9" wide out back...

[Saggio]

Love it!

Looks Perfect!

:thumbsup:

[Daddie Y]

Thank you, everyone for your comments. I believe the cost to widen steelies is between 300 to 600 depending on size. I just got done with a photoshoot. Feel free to check out the pics. http://www.teamvitz.com/featured-models/lyna-ly-sparks

"HAPPY NEW YEAR"!!!

[alch3miss]

fresh liking that scheme.

[Daddie Y]

Thank you!

[Daddie Y]

New Mod. Guarantee 5+ horsepower.

[Kioshi]

Nice model.

Love the front logo, looks clean and very original!

We have a Blazing blue with widened steelies up here, You guys should meet and discuss future plans.
He was the first we've seen.
teamwork~

[Daddie Y]

Nice model.

Love the front logo, looks clean and very original!

We have a Blazing blue with widened steelies up here, You guys should meet and discuss future plans.
He was the first we've seen.
teamwork~

Thank you!

Really, nice. post up pic. How wide did he go?

[Kioshi]

he attended our meet in July with the widened wheel surprise...let me link you to the thread w/ Kaotic's pics of it~

[Kioshi]

Thank you!

Really, nice. post up pic. How wide did he go?

As promised......Pur Blu is the name of the owner...and his post has the specs.

http://www.yarisworld.com/forums/showthread.php?t=29467&highlight=davenport

[Daddie Y]

Nice!!!

[wildmongoose26]

I don't even know the offset nor the shop I did it at. They don't go by offset, it was all done by measurement. They do things old school.

I can find out the offset by measuring and calculating it myself, but why should I go through the hassle. I am happy with my set up.

Iono, maybe to help further the community a bit more? If you want to go off of your "custom" measurement then what is the backspacing that they measured?

Getting new wheels and it would be nice to know how wide and offset on those. I can assume if its a 10" wheel then its at least a 40-45offset

[SAV912]

^ http://thesurvivalpodcast.com/forum/Smileys/default/zombie01.gif

I don't think Daddie is even on widened steelies anymore. IIRC, he's on wheels that can also be found on a new Shelby Mustang or Lamborghini Gallardo.

-C

[turboecho2005]

i love those white rims :) reminds me of vw corrado widen steelies

[wildmongoose26]

They arent the same wheels. They are rotiform cast 1 piece wheels. Just find it annoying he is keeping his custom (more then likely diamond racing) info from everyone. Where it might give some inside to those who actually care to know on exactly how much room is back there for inner clearance

[Daddie Y]

I am still on steelies. The steelies are custom made. Rear: 16X10 Front: 16X8. Offset: Unknown!!!

[Daddie Y]

The shop that custom made my steelies is Pico Wheels in North Hollywood.
http://www.teamvitz.com/wheel-widening
Price: Unknown

[SAV912]

They arent the same wheels. They are rotiform cast 1 piece wheels. Just find it annoying he is keeping his custom (more then likely diamond racing) info from everyone. Where it might give some inside to those who actually care to know on exactly how much room is back there for inner clearance

I don't think you grasp that he's probably sponsored. They don't pay him to give him info so he can replicate what they do on the cheap. They pay him to wear his wheels without asking questions. :smile:

Yeah, it sucks that he isn't telling you what you want to know, but he isn't telling you what you want to know because HE doesn't know. Contact a shop and go by the measurments he HAS posted and maybe you can hit somewhere close on what he did.

-C

[wildmongoose26]

Sorta helps and sorta doesnt. Thought about going wider since he is stock bodywork and i'm not. i'll just give on trying to get any help from this guy. ha

[SAV912]

Sorta helps and sorta doesnt. Thought about going wider since he is stock bodywork and i'm not. i'll just give on trying to get any help from this guy. ha

I remember in your last thread that you widened the rear fenders, but I don't remember by how much and I'm too lazy to go dig it up. Maybe try adding that to the width of his rears and that should give you at least a vague starting point. 15 or 16"x10+your widened fender width?

Or hell, just grab some adapters and source some Dodge Viper rear wheels. They wear 335s IIRC. It sounds like that's somewhere close to wide enough. lol

-C

[cali yaris]

I don't think you grasp that he's probably sponsored. They don't pay him to give him info so he can replicate what they do on the cheap. They pay him to wear his wheels without asking questions.

One thing I did for my sponsors was to help interested people become the sponsor's customer by telling them how much the parts (or service) cost.
The sponsors like that.

Here is the rest of the information, including the phone number:

Pico Wheel Service
13149 Sherman Way, Unit A
North Hollywood, CA 91605
(818) 982-0375

[wildmongoose26]

Hard to source the work when they cant "custom measure" the fenders and backspacing. So....if i know he has a 10" and has a +48 then i know i can run a 12"+48 or, 10"+24 or 11"+36, etc.