Fog Lights from Garm HELP?

[.Kevin.]

Well the good news is I got my foglights from MicroImage today! The bad news is one of the clips for the lenses is cracked and I have no idea if it will still be placeable or not without having it look out of place or if at all.

I also got some white microimage stickers on blue paper, if anyone knows how to apply these and informs me I'd appreciate it I'm pretty sure they are for the cars window inside?.


also the bulb lens is bigger than the plastic housing slot is it supposed to be like this? If so the only thing I got wrong was the lens clip doubting its garms fault though I believe the items come prepackaged.

I'll be adding photos on my main post for when they are installed.

http://i56.tinypic.com/e009s4.jpg

http://i56.tinypic.com/r7p3rk.jpg

http://i55.tinypic.com/jr5gde.jpg

no replies from garm so I figured I'd ask here.

[xbgod]

Dude you may want to have this relocated to the cosmetic, interrior/ exterrior section. This really isn't a performance mod. Plus you may just want to PM Garm. Makes more sense.

XBG

[.Kevin.]

If you would of read I did PM him on MI, and I find fog lights more performance than show maybe it's just me *shrug*

thanks for your post.

[xbgod]

Wasn't trying to bust your balls...........to much.

Good luck

XBG

[1NZYaris1]

Okay first thing Garm is uncontactable at the moment , lol
becuase he is entertaining guest's, lol ,
i know becuase he told me so , lol

secoundly the clip that is broken is on the plastic Shroud correct not oo the light
so this will not stop instalation of the lights
so instal them and wire them up by this timer Garm should have a replacement shroud in the post , if you have told him what side it is .

3rdly the MI transfers go on the outside of your car window
just make sure they are real clean first , and once on heat them with a heat gun or hair drier to activate the glue 100% otherwise they wont last.

hope all that helps .

[.Kevin.]

will the shroud itself still be placeable? if so I won't need a new one I just need to know if its installable as is with the same outcome.

[Betrivent]

The sticker is applied by removing the clear side, sticking the wording on the windows, and peeling the blue layer off, if I recall. Or just take of a layer, and see which way the letters stick.

[big lo]

For the time being install them, and try contacting Garm all will be well

[JumpmanYaris]

1 whp hehe

Kevin nothing some crazy glue cant fix homes lol

[Betrivent]

I was thinking some good epoxy should do it. There's very little strain on that clip if I recall.

[.Kevin.]

dyno?

and you guys thing I should super glue it lol?

bumping for some last opinions.

[cali yaris]

epoxy is better than super glue. and yeah, that clip doesn't have to too strong to do its job.

stickers:

1. clean where the sticker is going to be installed.

2. Watch this first: http://www.youtube.com/watch?v=MokSvReOT8g

3. peel off the top paper with the sticker ATTACHED TO IT. Toss the (now empty) blue bottom paper.

4. Now you have a sticker with sticky paper on top of it. Install the sticker wherever you want (rear quarter panel is good), OUTSIDE.

5. Peel the top paper off SLOWLY, preferably in the sun or with some heat. Use an angle so the sticker stays on the car.

6. ENJOY MORE HORSEPOWER

[.Kevin.]

alright sweet thanks, what is epoxy? Where can I find that lol

also LOL horsepower, this can go on the body aswell? That's crazy, figured I'd pop it on since no one here in town with a YARIS is on here, it might inspire a few.

[donchae]

what is epoxy?

according to wiki :

This is what epoxy means... (http://en.wikipedia.org/wiki/Epoxy)

[OTA'sTOY]

GOOGLE it.
you do know how to GOOGLE don't you?
:iono::iono::iono::iono::iono::iono::iono::iono:

[.Kevin.]

Nice comment reject.