PDA

View Full Version : Build Your Own Intake PARTS

Chris07LB
12-30-2006, 08:33 PM
Have a few of these pieces for anyone looking to piece together an intake for cheap.

You PVC intake building guys, here's your MAF adapter. :biggrin: Tested our MAF in this, and it fit perfect. New MAF screws included. Inside diameter is 2", and filter adapter outside diameter will fit a 2 3/4" or larger aftermarket filter.

* MAF adapter
* EGR adapter
* Filter adapter
* Rubber coupler
* 2 hose clamps

$45 Shipped FedEx Ground!
acrbill
12-30-2006, 09:15 PM
Is that pipe where the MAF sensor goes into the same size as stock? If that pipe is even slightly larger you are going to run lean since the sensor cannot read the increased volume of air.
Chris07LB
12-30-2006, 09:19 PM
It is the same size. Its actually pieces from an xA intake, hacked up of course. :tongue:
KSIbucky
12-31-2006, 01:42 AM
idk maybe
Chris07LB
12-31-2006, 07:47 AM
idk maybe


WTF? :confused:
Chris07LB
01-01-2007, 08:24 PM
BUMP
ChinoCharles
03-06-2007, 02:09 PM
Thanks Chris, it just got here. You left out the rubber coupler and hose clamps, but I guess I'll forgive you. :wink:
Chris07LB
03-06-2007, 02:17 PM
Crap.

Im sure you will manage. :smile:
ChinoCharles
03-06-2007, 02:19 PM
No big deal... both come cheap at Summit.

I can't wait for tonight! Gonna be interesting!
esquiva
03-07-2007, 09:24 AM
ey chris do u have anymore of these?...i assume these are same for the xb also?
Chris07LB
03-07-2007, 06:00 PM
Gave away what I had to Chino..
ChinoCharles
03-08-2007, 03:13 AM
Hey esquiva, ill send them to you when I'm done with them. Hang tight.
esquiva
03-08-2007, 12:06 PM
cool...i have an airinx filter i wanna toy with...
[FR] Sébastien Loeb
03-08-2007, 03:43 PM
when buliding an intake with many pieces and tubes combain together, the air flow will not flow as free as an intake that is build with just one or two tubes together such as most of the aftermarket intake kits ( TRD, AEM, ect...) therefore you are better off getting an aftermarket intake kit to get the most air flow out of it.
esquiva
03-08-2007, 06:18 PM
hmmm...i just needed the adapter though.......but that is a good point,sebastien
Chris07LB
03-08-2007, 08:06 PM
these parts where being used for mock up.. once everything is set the way they want it, im sure its all going to become one nice complete piece.