FS: OEM Cruise Control Stalk with Wire and Screws

[CTScott]

I have a couple of brand new, OEM cruise control stalks with the cruise control wire that connects the stalk to the clock spring and the two mounting screws. If you're in the CT area, I can give you a hand with the installation.


I also have the pins necessary for installing it on a 2008 and older Liftback or a 2009 and older Sedan:

http://www.yarisworld.com/forums/showthread.php?t=31763


39072

[yaris2010RS]

please pm me with ur paypal and when i get home from work tonight i will send u funds.

[EckoDG]

scott, my 2010 sedan will no be available? :( cant fit? :(

[CTScott]

scott, my 2010 sedan will no be available? :( cant fit? :(

It will fit a 2010 Sedan.

Magnum23 installed cruise control on his 2009 Sedan. His Puerto Rico spec Yaris had the wiring at the steering column, but did not have the wire from the ECM to the column, so he had to run that wire to make it work on his.

Look at this page of this thread for more info:

http://www.yarisworld.com/forums/showthread.php?t=25515&highlight=cruise+control+puerto+rico&page=3

[magnum23]

That's correct, Eckodg contact me if you need any help

[Saggio]

Pins?

I thought 08 yaris is screwed for CC?

[CTScott]

Pins?

I thought 08 yaris is screwed for CC?


Check out this thread for all of the details, but in a nutshell all 06 to present US and Canadian Yaris ECMs have had the functionality built it.

http://www.yarisworld.com/forums/showthread.php?t=25515&highlight=faq+cruise

[vhicke]

scott do you have a diy kit that i can get as i have a 2008 yaris sedan and just want the easy way....let me know...thanks

[YAR1S]

Is this DIY fairly easy or difficult?

[CTScott]

Is this DIY fairly easy or difficult?

It's fairly easy. On your 08 it would require adding the pin to the ECM connector, running the wire through the passenger side firewall grommet and under the dash, across to the steering column, adding the two pins to the connector on the column, removing the airbag, drilling the 1" hole for the stalk in the lower steering wheel cover, mounting the stalk, and moving the horn wire from the existing connector to the stalk's connector.

No one has written up a soup to nuts DIY on doing an OEM stalk on an 07 or older, but all of the pieces mentioned above are detailed in the DIYs linked to in this thread:

http://www.yarisworld.com/forums/showthread.php?t=25515

[timmay]

With all of Scott's posts and fast shipping, I will have CC before my payment books arrive. He is a real stand-up guy, thanks.

[cool_beans00]

Still available?

I have an auto 2010 3dr.

From what I can tell, all i need is the stalk, the y-cable, and screws.

[CTScott]

Still available?

I have an auto 2010 3dr.

From what I can tell, all i need is the stalk, the y-cable, and screws.


That is correct (and I do still have a couple).

[matthewai]

so these would just be plug and play basically?

[CTScott]

so these would just be plug and play basically?

Correct. On 09+ Liftbacks and 2010+ Sedans all of the wiring is in place.

[matthewai]

hmm this is tempting and im in ny ill pm if need be

[alamocoastie]

Hey scott, want one. Let me know. I need the full set up as I have a 2008 hatch. I can paypal you the money, just need to know where to send it.

[SAV912]

So I'm assuming the OEM stalk + wire + ECM wire from the other thread = $50 shipped?

The girl in this tandem wants cruise in her Yaris badly. Esp after a stiff speeding ticket a few weeks ago. :biggrin: Her car is an '08 LB Automatic if that helps. I put it in my '09 LB MT quite easily myself, but hers sounds like a more daunting task.

Please let me know Scott if you still have enough available and if so, I can Paypal you tonight.

-SAV:drinking:

[CTScott]

So I'm assuming the OEM stalk + wire + ECM wire from the other thread = $50 shipped?

The girl in this tandem wants cruise in her Yaris badly. Esp after a stiff speeding ticket a few weeks ago. :biggrin: Her car is an '08 LB Automatic if that helps. I put it in my '09 LB MT quite easily myself, but hers sounds like a more daunting task.

Please let me know Scott if you still have enough available and if so, I can Paypal you tonight.

-SAV:drinking:

I do still have a couple left. For and 08 AT, you just need the stalk/wire/screws and the $10 pin kit. Optionally, since the 08 doesn't have an indicator in the cluster, you might want one of my Cruise control indicator modules, which has a panel-mount LED.

[SAV912]

I'll ask her since it is her car, but I personally don't see massive benefits in the light. Then again, she may want it just because my car has the light in the cluster. Who knows with women. :biggrin:

How much would we be talking for what I would need? We can take this to PM if you want, I don't want to clutter up your sales thread. Thx.

-SAV

[hayden]

I have an automatic 2007 3door liftback - am I correct in saying that all I need to install cruise control is the OEM stalk and the $10 pin kit you also sell? If so, could you send me the paypal invoice to:

1400rr at gmail

Thanks! I also sent a PM but it wasn't showing in my PM outbox so I have no idea if it went through.

[CTScott]

I have an automatic 2007 3door liftback - am I correct in saying that all I need to install cruise control is the OEM stalk and the $10 pin kit you also sell? If so, could you send me the paypal invoice to:

1400rr at gmail

Thanks! I also sent a PM but it wasn't showing in my PM outbox so I have no idea if it went through.

PM replied

[hayden]

CTScott replied extremely fast and shipped extremely fast. The stalk looked brand new (is it?) when I got it and came in good packaging. Thanks!

[nmd55]

got any more for an '08? if so I will take one. Please PM payment info.

[branserud]

Hi Scott
Do you have OEM cruise control stalks with the cruise control wire that connects the stalk to the clock spring and the two mounting screws left?
Will this fit swedish/european yaris diesel 2006?
Can you ship to sweden?
Brgds
Stig

[CTScott]

Hi Scott
Do you have OEM cruise control stalks with the cruise control wire that connects the stalk to the clock spring and the two mounting screws left?
Will this fit swedish/european yaris diesel 2006?
Can you ship to sweden?
Brgds
Stig

Unfortunately, the cruise control stalks won't work on European Yaris, since they don't have the functionality programmed into their ECM.

[cool_beans00]

I just wanted to post saying seller is GREAT! patient and answered all my questions. Came with everything I needed. I installed it today and it works great!

thanks!

[rlad]

CTScott,
I have a 2008 3 dr. standard shift. Can you PM me with everything I need, what the cost is and paypal info.
Thanks, Roy

[dhewgill]

Hi CTScott,
Everything arrived. Thanks for a quick and hassle-free transaction.
:thumbsup:

[PROX4x4]

Do you have these on sale on Ebay? I have a 3Dr 08 Hatchback, please let me know if it fits and if you can supply all the parts necessary.

Thank you,

[CTScott]

Do you have these on sale on Ebay? I have a 3Dr 08 Hatchback, please let me know if it fits and if you can supply all the parts necessary.

Thank you,

I do have the parts for sale. I sent you a PM with the details.

[kz27]

hello, do you have any parts left for sale?

[CTScott]

hello, do you have any parts left for sale?

Yes.

[yrsgirl]

hey ctscott, i have the stalk already but am looking for the other items that i would need to make this work. ie pins and wires. can you hook me up?
thanks

[CTScott]

hey ctscott, i have the stalk already but am looking for the other items that i would need to make this work. ie pins and wires. can you hook me up?
thanks

Yes. I'll PM you with info.

[Chuckinator]

Hey CTScott, I'm interested in installing cruise control on my 2007 automatic sedan. Do you happen to have any parts left for sale? I don't have anything right now, so I believe I would need the stalk, stalk wire, and the necessary pins.

I'm also interested in your custom indicator, if you are still producing those.

[CTScott]

Hey CTScott, I'm interested in installing cruise control on my 2007 automatic sedan. Do you happen to have any parts left for sale? I don't have anything right now, so I believe I would need the stalk, stalk wire, and the necessary pins.

I'm also interested in your custom indicator, if you are still producing those.

Yes. I still have all of the parts available. I will PM you with details on what you need for your car.

[SimTronik]

I don't have any cruise control on my car is this all i need?
I'd like one and all i need to make it work. Can you PM details, i'll send you a payment via paypal.

Thanks.
I'M from Quebec, canada

[CTScott]

I don't have any cruise control on my car is this all i need?
I'd like one and all i need to make it work. Can you PM details, i'll send you a payment via paypal.

Thanks.
I'M from Quebec, canada

PM sent.

[Grimsby53]

I'm also interested in a turn-key kit for an 07 3-dr hatch, manual transmission.

PM me with price, and payment details, please.

[The Spectacle]

PM'd

[SimTronik]

I just received it.
I don't understand the Yaris w/ power or without part in the manual. Can you explain? Thx.

[CTScott]

I just received it.
I don't understand the Yaris w/ power or without part in the manual. Can you explain? Thx.

That is with or without the factory power package, which includes power locks and windows.

[SimTronik]

Oh great i have all that. Hope it make the install easier :D

[SimTronik]

So i'm missing: Connector D3 Pins, quantity 2 (82998-12870) and Lower Steering wheel Boss (cover) (with the hole already in it for the cruise stalk {If you
don’t wish to drill the exiting one}):45184-52130-B0 and ¼” Ring terminal for 18-22 AWG wire (if required to terminate added D3 ground pin).

If i get it right...
I own a Yaris sedan 2010 w/ power.
(ok ok i could drill the existing steering)

[CTScott]

So i'm missing: Connector D3 Pins, quantity 2 (82998-12870) and Lower Steering wheel Boss (cover) (with the hole already in it for the cruise stalk {If you
don’t wish to drill the exiting one}):45184-52130-B0 and ¼” Ring terminal for 18-22 AWG wire (if required to terminate added D3 ground pin).

If i get it right...
I own a Yaris sedan 2010 w/ power.
(ok ok i could drill the existing steering)

Did you verify that the D3 pins are not present? A 2010 Sedan with power should have them.

[SimTronik]

Oh ok, not checked yet.
Removing the wheel looks like a hard job for a beginner :S

[CTScott]

Oh ok, not checked yet.
Removing the wheel looks like a hard job for a beginner :S

You only have to remove the wheel if you are replacing the lower boss with the pre-holed one. You can mark and drill your existing one in place.

[SimTronik]

Really! I was planing to drill the hole after all. I read all the manual pdf and i was lost at the wheel and air bag removal and i though it was kinda risky. But it seems more plug n play. Can you guide me to what part of the installation manual is pertinent for me? Thanks a lot!

[CTScott]

Really! I was planing to drill the hole after all. I read all the manual pdf and i was lost at the wheel and air bag removal and i though it was kinda risky. But it seems more plug n play. Can you guide me to what part of the installation manual is pertinent for me? Thanks a lot!

Section 1.1 for the airbag removal

Section 1.3 for the lower boss hole drilling

Section 1.4 up to 1.4.2 for the stalk and wire installation

Section 1.5 for re-installing the airbag

Section 2.1 to verify the presence of the connector D3 pins

[SimTronik]

Perfect thanks! Any tips what to avoid with the airbag?

[CTScott]

Perfect thanks! Any tips what to avoid with the airbag?

Just make sure that you disconnect the negative battery terminal and wait a couple of minutes before disconnecting the airbag, and when you remove it, set it down on its frame, rather than on the Toyota logo.

[SimTronik]

Everything is plugged in and back on its place but i cant remove the steering colum cover. i think its because the wheel is in place? So i cant check for the d3 pins. Can i just road test it lol? or it is risky?

[CTScott]

You can just road test it, or better yet, turn the ignition to ON, press the on/off on the stalk, and see if the indicator comes on.

[SimTronik]

It works! Can beleive i have a cruise control for 40 bucks :) Thanks sir.

[jiroj.amaralikit]

I have the item if you are interested.

[33OH]

Scott, can you PM me what all I'd need to run this on my 2008 Yaris LB 5 speed? Interested but not sure if the wiring would be over my head.

[CTScott]

Scott, can you PM me what all I'd need to run this on my 2008 Yaris LB 5 speed? Interested but not sure if the wiring would be over my head.

You can definitely handle it. With my DIY many who have never touched any wires in a car have self installed it.

http://www.yarisworld.com/forums/showthread.php?t=33750

[A-Dingo-Ate-My-Baby]

protip

for the two screws, you can use 2 standard server rack mount screws
found in most computer rooms or racks....
they are typically the same size and thread pitch, and short enough as well

that is what I used on my cruise control after digging through my junk drawer

[deathwisher]

protip

for the two screws, you can use 2 standard server rack mount screws
found in most computer rooms or racks....
they are typically the same size and thread pitch, and short enough as well

that is what I used on my cruise control after digging through my junk drawer

That depends on if you are in Canada or US... >.> Canada's server rack uses #10-32 screws. I can't remember which one the US ones used...

[GAAzureMach1]

Hey Scott, I have a 2010 HB 3dr L Automatic with the convenience package. Can you pm me with cost and payment info?

Thanks, Todd

[YAR1S]

soooo are these plug and play for 2007 liftback? *crosses fingers*

[CTScott]

soooo are these plug and play for 2007 liftback? *crosses fingers*

Yes. There is a little bit of wiring that needs to be added for 06-08 Yaris, but it is just a matter of adding a couple of pins to two connectors and running the wire from the ECM to the steering column. Take a look at my DIY to see exactly what's involved:

http://www.yarisworld.com/forums/showthread.php?t=33750

[thestranger]

hey Scott, I know I'm like a year late... got an '09 lb/mt. any more stalks for sale? :)

[CTScott]

hey Scott, I know I'm like a year late... got an '09 lb/mt. any more stalks for sale? :)

Yes. I still have plenty.

[GAAzureMach1]

money sent.

[GAAzureMach1]

Scott I got it in the mail today. Took me 20 mins for the whole install. Easiest mod I have ever done. Thanks a bunch!

:w00t:

[ttr125fan09]

if you have any left for sale, i would be interested

[CTScott]

if you have any left for sale, i would be interested

I do still have some.

[Herder]

CTScott, you still have any stalks? I have a 10' LB Auto no power package

[CTScott]

CTScott, you still have any stalks? I have a 10' LB Auto no power package

I do indeed. I replied to your PM.

[alpha1]

I just installed the cruise control ordered from CTScott for $40.00 stalk & shipping and it was simple, relatively quick (about 1 hour total), and works great.

Installed on car listed 2011 yaris auto sedan with power windows/doors/ & blinking light on dash for immobilizer etc.

After disconnecting the battery, I only had to 1. remove the two Torx screws with a T-30 2. lift the air bag to expose the area to put the new stalk in and push it through the 3. new hole I drilled with a 1 inch drill (did not have 1& 1/8). 4. I then screwed in the 2 new phillip screws supplied by CTScott. 5. I then disconnected the white plug from the stearing column and Connected the new white plug on the stalk. 6. I then disconnected the other end of the original wire that had the white plug and the other end was a clip on wire to the air bag area; and connected the new slip on wire here and I am done except for reconnecting the air bag with the torx screws. (I never had to nor did I disconnect the air bag & other yellow wires) (Both yellow wires stayed intact from the air bag to the stearing column the entire time). (only 1 wire was removed to install this)

To save someone else time..........A regular T-30 usually comes in a box with a simple straight screw driver type handle to turn the T-30. I was unable to turn this with my hand strength. I quickly picked up my 1/4 inch rachet set and a small extension and added a 6.5mm socket and slipped the T-30 into the 6.5mm socket. It now became simple to turn the T-30 screws on both sides of the column (Leverage is great). Also squeeze the top center of the white plug and center of the clip to remove that one wire that you are replacing.

It is really simple, there was just a lot of previous older models and many pages of diagrams listed that no longer were needed for new models etc. that did not have all the wires etc. coming to the stearing column that made it a little confusing. The newer cars will all probably be simple with the power windows etc. using the oem stalk from CTScott.

Thanks Again.....Works great.... Great buy for oem cruise control....dash board icon shows it's working....tap for increase speed works...etc. etc.:thumbsup:

I just read the Birthday listing, so ......... Happy Birthday CTScott

[Machinist]

CTScott, you still have any stalks? I have a 2011 3dr. power doors, locks, etc. Manual trans.

[CTScott]

CTScott, you still have any stalks? I have a 2011 3dr. power doors, locks, etc. Manual trans.

Yes. I will PM you.

[rtom]

Hi CTScott,

I finally have time for this mod -- so I would be interested in buying what I need for my '09 LB, with manual transmission but no power package.

Please PM me & I'll paypal you the funds. If I need more than just the stalk, please let me know. I recall for MT there is a clutch switch to install?

And yes, I'll re-read your "DIY Cruise Control FAQ (2006-2010 Yaris)" thread -- it has been a few years.

Thanks!

[rtom]

Too much turkey -- mine's a 2010, not a 2009!

[CTScott]

Too much turkey -- mine's a 2010, not a 2009!

No problem - PM sent.

[SirSchwank]

I'm finally looking to add this as well. Do you still have kit for an '07 LB MT?

[CTScott]

I'm finally looking to add this as well. Do you still have kit for an '07 LB MT?

Yes. I will PM you the info.

[jecurtin3]

CTScott,

I'll take a kit if you still have one. I have a '09 3dr. Do you take CC's?

[UberSilver]

CTScott,

I'll take a kit if you still have one. I have a '09 3dr. Do you take CC's?

Me2:biggrin:

[CTScott]

Pm's sent.

[ilikerice]

Pm sent =)

[futuredenied]

i need a full set up too! let me know what you can do. Thanks in advance!

[CTScott]

i need a full set up too! let me know what you can do. Thanks in advance!

No problem. I replied to your PM.

[DirtKurt]

Hey would like to get this for my girlfriends Yaris, 2010 4dr HB. power windows and locks. Let me know, Thanks Kurt.

[CTScott]

Hey would like to get this for my girlfriends Yaris, 2010 4dr HB. power windows and locks. Let me know, Thanks Kurt.

PM sent. By the way, you are about two weeks late. Cruise control would have been the ultimate Valentine's day gift for her.

[AlphaFox78]

Scott, I live in western mass and have a 2007 MT liftback, can you PM me the details on all the required part costs, if you have everything and if you could help me install? TY!!

[skoff]

if you still have some i have a 2007 sedan pm me with details plz! thanks ;)

[weedboy]

Hey dude,

Can you ship it to Malaysia? I wanna fit it to my 09' Vios aka Yaris Sedan.
Let me know how much extra aite!

Cheers!

[UberSilver]

Have you got an intermittent wiper stalk?:wink:


I have a couple of brand new, OEM cruise control stalks with the cruise control wire that connects the stalk to the clock spring and the two mounting screws. If you're in the CT area, I can give you a hand with the installation.

$40 shipped to the US, Canada, or PR.

I also have the pins necessary for installing it on a 2008 and older Liftback or a 2009 and older Sedan:

http://www.yarisworld.com/forums/showthread.php?t=31763


39072

[n01tk]

CTScott, just bought 2008 Yaris sedan ( no power option). My wife wants cruise. Do you have the stalk, jumper cable and connectors. Nova Scotia, Canada

[CTScott]

CTScott, just bought 2008 Yaris sedan ( no power option). My wife wants cruise. Do you have the stalk, jumper cable and connectors. Nova Scotia, Canada

PM sent.

[henrylee]

Do you have any more stalk, cable, and connector for 2011 sedan?

[CTScott]

Do you have any more stalk, cable, and connector for 2011 sedan?

Yes.

Weren't we supposed to have you come up here for me to help you install it?

[henrylee]

^ Absolutely. I will purchase the cruise control stalk from you. I wont be back in town till june though. By chance do you also sell fog lights for sedan?

[CTScott]

^ Absolutely. I will purchase the cruise control stalk from you. I wont be back in town till june though. By chance do you also sell fog lights for sedan?

I don't stock fog lights, but you can order them from Micro Image and we can install them at the same time.

[jcboy]

Hey dude,

Can you ship it to Malaysia? I wanna fit it to my 09' Vios aka Yaris Sedan.
Let me know how much extra aite!

Cheers!

the thing is, asian yaris are assembled in thailand and the philippines. scott can't be sure our ecus have cruise control in them, let alone the wiring might be slightly different.

but hey, i'll let scott speak for himself. i'd love to have this mod too, but i have a pending order from scott once i have some cash to spare. (secret lol)

[CTScott]

the thing is, asian yaris are assembled in thailand and the philippines. scott can't be sure our ecus have cruise control in them, let alone the wiring might be slightly different.

but hey, i'll let scott speak for himself. i'd love to have this mod too, but i have a pending order from scott once i have some cash to spare. (secret lol)

I somehow missed him asking about that, but you and I did discuss it, and I am pretty sure that Asian area Yaris of that vintage did not support cruise control. One way that we can check is to check the voltage (with the ignition switch in the ON position) of the ECM connector A21 pin 40 (that is the pin location where a pin gets added per my DIY). If we see +12 V on that pin with the ignition on, then theoretically cruise exists for that car. If we see 0 V on that pin, then it definitely does not.

[Dirk888]

CTScott,
I'm interested in the price for the DIY cruise control kit. I have an '07 3dr, manual transmission. Thanks

[Lair]

I need a cruise kit for my '09 3 door. It's an automatic with no power options.

Please PM your Paypal addy and l'll pay ASAP.

Thanks!

[CTScott]

I need a cruise kit for my '09 3 door. It's an automatic with no power options.

Please PM your Paypal addy and l'll pay ASAP.

Thanks!

PM sent

[Lair]

Received the kit yesterday, and installed it today. Thanks for the quick shipping!

You can definitely handle it. With my DIY many who have never touched any wires in a car have self installed it.

http://www.yarisworld.com/forums/showthread.php?t=33750

Installed my kit in less than 20 minutes, and I wasn't even in a hurry. The later cars ('09+) are really easy. The pdf was a big help, and I just happened to have a Unibit that was the proper size for the stalk hole.

Thanks for the thread, the instructions, and the kit. You seriously made my day. I wish I'd done this when i bought the car.

If you ever come up with a central locking kit, I'll be the first one in line to buy it. :thumbsup:

[henrylee]

Hey Scott. Have anymore cruise control stalks I can come pick up?

[CTScott]

Hey Scott. Have anymore cruise control stalks I can come pick up?

I do. I always have some on hand.

[jayeh]

I just took mine to be installed today and the installer took one look and said its a cheap Chinese knockoff. Any ideas?

[ToyotaBuzz]

I just took mine to be installed today and the installer took one look and said its a cheap Chinese knockoff. Any ideas?

Did he install it?

[jayeh]

Did he install it?

Yes.

[CTScott]

I just took mine to be installed today and the installer took one look and said its a cheap Chinese knockoff. Any ideas?

I have no idea why he would say that, as it is genuine OEM stalk. The only thing that might have made him question it is the horn wire, which I add, to save people the hassle of breaking the pin to pull their's out of the original connector.

[isidoro]

Hello CTScott

I write from another part of the world “italy”

I are desperate:cry:

I know that we are talking only of yaris

but you are the experts on Cruise Control that I found

I own a hybrid Auris HSD 1,8L

I put all the parts needed as the model with the standard Cruise Control

when I press the button on/off, the lights Cruise Control lights up green

but just release the brake I get a yellow triangle and the following “check Cruise Control “

do you have any advice for me??? :bow:

thanks so much in advance

foto http://tinyurl.com/nfsms5n

[CTScott]

Hello CTScott

I write from another part of the world “italy”

I are desperate:cry:

I know that we are talking only of yaris

but you are the experts on Cruise Control that I found

I own a hybrid Auris HSD 1,8L

I put all the parts needed as the model with the standard Cruise Control

when I press the button on/off, the lights Cruise Control lights up green

but just release the brake I get a yellow triangle and the following “check Cruise Control “

do you have any advice for me??? :bow:

thanks so much in advance

foto http://tinyurl.com/nfsms5n

I will have to do some research for you when I return. I am currently in Northern Europe on holiday.

[isidoro]

OK
good vacation
we update when you return
Isidoro north italy

[isidoro]

while visiting europe
if you go to Northern Italy
I'll pick you??
I am close to Bergamo, which has the largest airport
where land all European flights

Bye-Bye!

[rapev-8]

do u have anymore?

[CTScott]

while visiting europe
if you go to Northern Italy
I'll pick you??
I am close to Bergamo, which has the largest airport
where land all European flights

Bye-Bye!

I am a bit more North: England, Denmark, Sweden, Estonia and Russia.

[CTScott]

do u have anymore?

Yes

[Jadijkstra2000]

Do you have more? :)

[CTScott]

Do you have more? :)

Yes

[Jadijkstra2000]

Will it work on european Yaris 2010?

[Hayabusaboy]

Was reading thru a few treads, seems your saying that all yaris have the hard wiring from the factory, correct? I have a 07 hatchback auto trans. If all i need is this kit your selling i'd like to purchase one, if you still have some available. Pay pal ok? Thanks Bruce

[lanemeyer14]

I'm interested in one as well if still available. Will be for an 08 liftback 5spd

[CTScott]

Will it work on european Yaris 2010?

My understanding is no, but a person from Germany recently ordered one from me, as he was told that it would work. I will let you know when I hear back from him.

[Jadijkstra2000]

Number of the ECU is : 89661-0dd90

Hope it can work :) Would be nice

[Jadijkstra2000]

It looks like the car already has the clutch switch installed, i cannot have it started when the clutch is not pressed... So i guess that one is installed...

[CTScott]

It looks like the car already has the clutch switch installed, i cannot have it started when the clutch is not pressed... So i guess that one is installed...

The cruise control clutch switch is different. The starting one requires the clutch to be pressed completely to trigger, where the cruise control one triggers as soon as the clutch switch is touched.

[Jadijkstra2000]

ah alright, didn't know that, thanks :) are there ways to check if the car is prepared for cruise?

[CTScott]

ah alright, didn't know that, thanks :) are there ways to check if the car is prepared for cruise?

The best test is to check the voltage on pin 40 of the A21 ECM connector (see my DIY below for that location). If there is 12 V on that pin with the ignition on, then cruise is present.

http://www.yarisworld.com/forums/showthread.php?t=33750

[Jadijkstra2000]

The best test is to check the voltage on pin 40 of the A21 ECM connector (see my DIY below for that location). If there is 12 V on that pin with the ignition on, then cruise is present.

http://www.yarisworld.com/forums/showthread.php?t=33750

Do I need to remove the A21 connector to do the test or leave it in place for testing?

[CTScott]

Do I need to remove the A21 connector to do the test or leave it in place for testing?

Leave it in place. You will need to pull the rubber plug if there is not a wire present, so you can stick a piece of wire in to take the measurement.

[isidoro]

Hello CTScott

I write from another part of the world “italy”

I are desperate:cry:

I know that we are talking only of yaris

but you are the experts on Cruise Control that I found

I own a hybrid Auris HSD 1,8L

I put all the parts needed as the model with the standard Cruise Control

when I press the button on/off, the lights Cruise Control lights up green

but just release the brake I get a yellow triangle and the following “check Cruise Control “

do you have any advice for me??? :bow:

thanks so much in advance

foto http://tinyurl.com/nfsms5n

Hi CTScott

problem solved :thumbup:
found missing wire
between ECU and brake switch

Bye isidoro

[Mommas Yaris]

Just wondering if you have any of these left and if you do how much? If you do would you please comtact me though my email @ cgoretx@gmail.com

[CTScott]

Just wondering if you have any of these left and if you do how much? If you do would you please comtact me though my email @ cgoretx@gmail.com

email sent.

[xboxer]

Just wondering if you have any of these left and if you do how much? If you do would you please comtact me though my email @ cgoretx@gmail.com

Same question as above, including the OEM Stalk CC Pin Kit, and Cruise Control Indicator Module. Please send PM. Thanks

[CTScott]

Same question as above, including the OEM Stalk CC Pin Kit, and Cruise Control Indicator Module. Please send PM. Thanks

PM sent

[Tylard]

Do you still have any these?
07 sedan m/t. Cost as well. Thanks

[CTScott]

Do you still have any these?
07 sedan m/t. Cost as well. Thanks

Yes. PM sent.

[nortonfb]

Please send me the pricing & payment info also.
I have a 2007 hatch. Does your kit include everything necessary?
Thanks
Nortonfb
68 Norton fastback:thumbup:
(Steve)

[CTScott]

Please send me the pricing & payment info also.
I have a 2007 hatch. Does your kit include everything necessary?
Thanks
Nortonfb
68 Norton fastback:thumbup:
(Steve)

PM Sent. The kit includes everything necessary, other than the tools to do the install.

[z0mb13k1ll]

ive got a 2007 sedan, can you pm me with the price and what i would have to do to install? thanks

[CTScott]

ive got a 2007 sedan, can you pm me with the price and what i would have to do to install? thanks

PM sent

[Tylard]

Super fast shipping, install not too bad, fishing the wires was def the hardest part. But I cant seem to get it to function on my 07 m/t sedan. I have tried rechecking all the connections and triple check the clutch switch to ensure it is fully pressed in when the my foot is off the clutch pedal.
Any suggestions of what to check?
My wire coming out of pin 40 on the ECM is hooked up and ran through the firewall. I connected this directly to the wire coming out of the slot 1 of the D3 connector. Is this ok or do I need a different wire? If so what is it where do I get it

[CTScott]

Super fast shipping, install not too bad, fishing the wires was def the hardest part. But I cant seem to get it to function on my 07 m/t sedan. I have tried rechecking all the connections and triple check the clutch switch to ensure it is fully pressed in when the my foot is off the clutch pedal.
Any suggestions of what to check?
My wire coming out of pin 40 on the ECM is hooked up and ran through the firewall. I connected this directly to the wire coming out of the slot 1 of the D3 connector. Is this ok or do I need a different wire? If so what is it where do I get it

Double check your pin 1 and pin 2 locations per my DIY (http://www.yarisworld.com/forums/showthread.php?t=33750)

Also, with the ignition switch in the ON position, you can measure the voltage on the pin1 wire and will see 12V if it is connected properly. (Pin 1 is the one that goes to pin 40 on the ECM connector).

Also, double check your pin 40 to make sure you didn't install it on the opposite side of where it belongs.

[Tylard]

Checked pin 1 and 2 and Im happy with them. Rechecked pin 40 also happy with that.

Checked the voltage. I put my red lead on the connection between the pin 1 wire and the pin 40 ecm wire. Then I put my black lead on the bolt where pin 2 from the d3 connection is mounted. I get 12 v with the ignition turned on. Holding and toggling the cruise on/off switch does NOT make change and still reads 12 volts.

Where the pin 2 wire is mounted there is a black lead already connected to that, I just added on the pin 2 wire and put the bolt back on.

[CTScott]

Checked pin 1 and 2 and Im happy with them. Rechecked pin 40 also happy with that.

Checked the voltage. I put my red lead on the connection between the pin 1 wire and the pin 40 ecm wire. Then I put my black lead on the bolt where pin 2 from the d3 connection is mounted. I get 12 v with the ignition turned on. Holding and toggling the cruise on/off switch does NOT make change and still reads 12 volts.

Where the pin 2 wire is mounted there is a black lead already connected to that, I just added on the pin 2 wire and put the bolt back on.

Ah, the pin 2 wire is the "other side". It is the ground for the system.

The black wire is not pin two. It is in the opposite row from pin 2. In this picture you can see the blue wire in pin 1 and the brown in pin 2:

53077

[Tylard]

My D3 connector looks just like the one pictured. The wires sent are different colors but going off the colors shown in the picture. The blue one connects directly to the A21 pin 40 wire. The brown one goes to a bolt (for grounding).

[Tylard]

"4.8. Splice the ECM pin wire to the piece of 18-22 AWG wire using a butt splice or
solder and heat shrink tubing."
Do I really need to do that because the wire you sent me is long enough to reach the D3 connector.

[CTScott]

"4.8. Splice the ECM pin wire to the piece of 18-22 AWG wire using a butt splice or
solder and heat shrink tubing."
Do I really need to do that because the wire you sent me is long enough to reach the D3 connector.

No. They are long enough to reach with how I ship them now.

[Tylard]

Got the issue resolved, I now HAVE CRUISE!! Pretty sure this just doubled the value of my car. So happy about this.

[Tylard]

And buy your stuff from CTScott. He does all the BS work so you don't have to and everything comes ready to hook up. Fast shipping, good customer service, and it was pretty fricken cheap too. Scotts the man.

[OldTimer]

I ran across this forum while searching for a solution for a Yaris without cruise.
I'm needing to make twice weekly 250 mile trips and unfortunately am finding it
difficult keeping a constant speed with old worn out feet and legs.

I have an 2008 Yaris hatchback (base) with a manual transmission.
Are the cruise control kits still available?
Thanks

[nortonfb]

CT Scott has them. Drop him a PM.
Steve

[OldTimer]

Thanks

[YAR1S]

OK scott ..... might tackle this in the next month....
message me info on buying the kit for a 2007 (power package?) AT Liftback

Thanks!

[hayden]

Hi Scott - previous customer here, now with an automatic 2014 2DR. Would the kit you sell work on my 2014 as well? Would love to get CC installed on it. You mentioned in the other thread that the 2015 doesn't require additional wiring, is that true for 2014 too? And by that, do you mean I just plug in the OEM stalk and the rest of the wiring to the car's computer is already there? If so, that's very nice!

Let me know where to Paypal!

[Eduardo_mty]

I bought this parts numbers to use on my 2015 yaris

Screw w/washer 90080-15079
Switch assy clutch 88280-14030
Wire Cruise sw 84633-02020
Speed control 84632-0821

I was installed in 2 hours, And works, inmediatelly

[CTScott]

Hi Scott - previous customer here, now with an automatic 2014 2DR. Would the kit you sell work on my 2014 as well? Would love to get CC installed on it. You mentioned in the other thread that the 2015 doesn't require additional wiring, is that true for 2014 too? And by that, do you mean I just plug in the OEM stalk and the rest of the wiring to the car's computer is already there? If so, that's very nice!

Let me know where to Paypal!

Yes. Same parts and simply install the stalk for your AT Yaris. And I even carry the steering wheel side trim pieces for the 2012-2015.

[hayden]

Yes. Same parts and simply install the stalk for your AT Yaris. And I even carry the steering wheel side trim pieces for the 2012-2015.

Got my stalk yesterday and installed today in less than 5 minutes. Amazing how much easier it is now!

Thanks again Scott for all your documentation and service! And fast shipping!

[hachi-roku_fan]

Do you still have these? How much? I think for a 2010 it's just plug and play right, since the cluster should have a cc indicator?

[CTScott]

Do you still have these? How much? I think for a 2010 it's just plug and play right, since the cluster should have a cc indicator?

PM sent

[deckster.s1]

Hello,

Do you have any kits for a 2007 manual transmission hatchback?

[Aqueon]

Hello, CTScott,

Another potential contributor to your (apparently booming) cruise control mod business here. I'm looking at buying a 2012 Yaris Fleet Sedan, which - as far as I can see - doesn't have cruise control.

Can you please PM me the price for your mod components? I'm in Memphis, TN.

-A

[CTScott]

Hello, CTScott,

Another potential contributor to your (apparently booming) cruise control mod business here. I'm looking at buying a 2012 Yaris Fleet Sedan, which - as far as I can see - doesn't have cruise control.

Can you please PM me the price for your mod components? I'm in Memphis, TN.

-A

PM sent

[Northern18]

I sent your a PM. Just making sure you get it. I don't see it in the sent messages so I'm not sure you got it.

[CTScott]

I sent your a PM. Just making sure you get it. I don't see it in the sent messages so I'm not sure you got it.

Yes. Received and replied.

[Captain Yaris]

Scott,

I tried PM'ing you twice but for some reason it won't send a message. I am looking for a kit for a US spec 2016 Yaris L. Thanks.

Captain Yaris

[Kelrem]

Scott,

I'm looking for a kit for a 2007 Yaris 5 speed manual. Tried PMing you, but I don't think it went through.

[Dodge Aries K]

I need a steering wheel cover plate that fits the 2012 up yaris if you have one still

[NEexpat]

Hey Scott,

Doing a CC install on 2010 Auto 4 door hatch, have everything but stalk wire (84633-02020)

Do you have one for sale, and if so, how much would it be shipped to MA?

Thanks.

Cheers,

NEexpat




PM sent.

[Kelrem]

Anyone having any luck getting ahold of CTScott? I'm not having any luck with the PMs.

[heeroyuy01195]

Trying to get in touch with him as well but no luck :(

[NYC-SE]

Yeah CTScott hasn't been around much recently. Hope everything is alright.

[ditchtwicker]

Having same issues with PMs. CTScott, you received one message from me and then asked if I was looking for OEM cruise kit for auto or manual. I was looking for OEM cruise for automatic.

And if you're just busy with life and having too much fun to get back to me, well, that would be good too. Thanks.

[heeroyuy01195]

Having same issues with PMs. CTScott, you received one message from me and then asked if I was looking for OEM cruise kit for auto or manual. I was looking for OEM cruise for automatic.

And if you're just busy with life and having too much fun to get back to me, well, that would be good too. Thanks.

Hey ditchwicker, Scott is around but he is travelling more frequently due to work. It takes him a little while to reply but he will get back to you. It took him almost a month to get back to me but got me what I needed as soon as he could. Best of luck!

[Aspr]

Pm sent. Looking for 2015 kit

[amacd]

I am looking for a DIY cruise control kit.. Have a 2007 yaris 5 speed hatch back.
Thank you.

[Gemak]

I hope CTScott is still around, hate to lose his knowledge in this car. I sent pm for cc and no response, looks like I’m not the only one.

[Sarhad]

Hello
I´m new her and i have yaris 1,4 d4-d from 2008 sol it was wierless Cruise control installed but it is NOT work .
Some one help ?

[Aspr]

Since OP is MIA can anyone point me in the direction of the parts I need for a 2015 yaris automatic

[Green Onion]

Another newbie question Just bought a 09 Yaris 4dr. sedan in looking at the instrument panel the temp light is on the left side of the speedometer not near the section that you show the cruise and set lights. How do I check to see if your two button Mod is possible on my car?

[Reehan]

Hi, i have a 2012 toyota Yaris UK 1.0L, am i able to install cruise control to this?

Thanks

[bywaterandblood]

I'd like to get one of the CC kits if you ahve any. I have a 2010 Yaris Hatchback. Is it just plug n play (install the stalk and y connector)? Or do I need to mess with pins, etc?

[Markwelch415]

I would like to buy parts to do this to my 08

[Adifferentautorepair]

Hey scott, want one. Let me know. I need the full set up as I have a 2008 hatch. I can paypal you the money, just need to know where to send it.
I need full kit too. Same vehicle 2008 hatch yaris