1ZZ Throttle Body

[Focus_Sh1ft]

Decided to sell this... I've had nothing but problems with this thing since I installed my turbocharger and it's practically useless now. However, for an NA application it's a great and cheap mod and I promise the difference can be felt.

The part number on this is 22030-0D030. This model is generally a drop in and go mod with no issues. I didn't have any when I first put it in. You will have a high idle on cold start though. No big deal.

$100 shipped takes it.

[Astroman]

Bump for a worthwhile mod! I did the swap with mine and love it.

[Betrivent]

What does it do?

[bail_w]

faster response when you press the gas pedal, correct me if i am wrong.

[Focus_Sh1ft]

faster response when you press the gas pedal, correct me if i am wrong.

Not really since it's still a drive by wire throttle body.

The main benefit comes from allowing more air to flow freely into the intake manifold. Across the RPM range you'll be running slightly leaner = more power.

At WOT, you'll really notice a difference.

Also - I'm gonna stop at Home Depot later and get the bolts to reattach the chip - just in case that was turning anybody away.

[ilikerice]

quick questions.. ive been reading that u need an adaptor plate to fit the throttle body on the intake manifold.. is this true for this application? if so, who or where can i get an adaptor plate? can the plate be made out of a piece of aluminum?

[Focus_Sh1ft]

quick questions.. ive been reading that u need an adaptor plate to fit the throttle body on the intake manifold.. is this true for this application? if so, who or where can i get an adaptor plate? can the plate be made out of a piece of aluminum?

It will bolt right up to the stock manifold.

That adapter plate serves no purpose - You're basically putting on a larger throttle body then restricting the airflow back down to the 1NZ throttle body.

[kustom play]

you really dont need one to be honest

i had this on my car a long time ago, works well, cold starts rev higher but thats about it.

i sold mine a while ago when i was going to sell the car but now that I have it totally paid off im more inclined to keep it

might be interested in picking this up if it includes the right bolts

[ilikerice]

ok, sweet, thanks for the info. i will look around a junk yard for mine.. no offense to you Focus. no rush in getting one right now

[weapon5]

I will take it if you can wait till next friday lol

[Focus_Sh1ft]

Yeah no problem, I can wait.

[weapon5]

sweet :D send me a pm so i can find you easier lol