Foglight Power Source

[Focus_Sh1ft]

I need a location to draw 12 volts (preferably in ACC) for my foglights. Until yesterday I had it hooked up to the ACC spot in most tutorials (also part of the fuel pump fused circuit), however it suddenly stopped working. I'm looking to use an add-a-fuse on the fuse panel, but don't know which spot will support them.

Since our bulbs use 80W, am I correct in assuming the amperage is 80/12 = 6.5ish amps?

[CTScott]

You can use connector 4F - Pin 5, which is a light blue wire. It is the ACC switched feed to the CIG and ACC fuses and is fed by the 25A AM2 fuse.

Correct on the current draw calc.

39617

[Betrivent]

Why not directly off the battery?

[Vinceb]

It could be the fact that I've got a Canadian version of the Yaris sedan, but in the engine bay, coming off the headlight harness is a second plug that has 3 (maybe 4) pins on it on. isn't this pre-wired for fog lights? - I haven't added mine yet but hope to this spring

[CTScott]

The US yaris is the same for the under hood wiring. I believe he's working on the coil side (switch side) of the fog light circuit, as opposed to the contact side (bulb side). I also think that he used the harness included with the aftermarket fogs, as opposed to the OEM wiring method.

[Focus_Sh1ft]

I'm actually not even using a relay. Just +12v from ACC to a switch out to the fogs.

Thanks CTScott. Your electrical genius never ceases to amaze me. :thumbsup:

[amalrd]

Hi I have a Toyota BELTA(SCP92, 1300cc, X grade) car. Need to fix the fog lights. Can I get the correct wiring points & directions how to get the switch connected. Can some one help me out.Tks.

Amal

[CTScott]

Hi I have a Toyota BELTA(SCP92, 1300cc, X grade) car. Need to fix the fog lights. Can I get the correct wiring points & directions how to get the switch connected. Can some one help me out.Tks.

Amal

Do you have the OEM fog lights or an aftermarket kit?