PDA

View Full Version : steering wheel hub adapter


Jason@SportsCar
03-07-2011, 03:57 PM
sold

TickleTimeTim
03-07-2011, 06:32 PM
what is the cost new for these things?

Jason@SportsCar
03-07-2011, 06:49 PM
what is the cost new for these things?

$89 for the NRG
http://www.racinglab.com/nrg-short-hub-toyota.html

$100 for the other
http://www.evasivemotorsports.com/Merchant2/merchant.mvc?Screen=PROD&Store_Code=EM&Product_Code=WB_HUB_TOYOTA

cali yaris
03-07-2011, 08:15 PM
Do you have the boot for the WB hub, or just the part as shown?

Jason@SportsCar
03-07-2011, 08:23 PM
Do you have the boot for the WB hub, or just the part as shown?

Just the part shown. I picked it up used and the boot was missing... It did come attached to a broken steering wheel. :mad:

Our new setup does not use the stock steering column, so these are no longer of any use.

rapev-8
03-08-2011, 02:39 PM
any idea how to disable the airbag light?

Jason@SportsCar
03-08-2011, 03:50 PM
any idea how to disable the airbag light?

No, I don't have the stock dash in our car.

http://farm5.static.flickr.com/4135/4827957610_58770c2112.jpg

JumpmanYaris
03-08-2011, 03:59 PM
No, I don't have the stock dash in our car.

http://farm5.static.flickr.com/4135/4827957610_58770c2112.jpg

Lmao

TickleTimeTim
03-08-2011, 08:01 PM
^^^^hahah. i want to see this in person. its like a weee death-proof

matthewai
03-09-2011, 01:32 AM
are all the controls for the car on the right windshield washer / blinker controller ?

Schizoprenia
03-09-2011, 02:40 AM
I don't quite get why you said it didn't have a provision to retain horn.

as for airbag i do believe a member here said something about by passing both the connector with a resistor, 5ohms IIRC.

if it's just some little wiring for horns to work im interested.

Jason@SportsCar
03-11-2011, 02:09 PM
bump

Jason@SportsCar
03-16-2011, 01:48 PM
Bump for new ridiculously low price.

CTScott
03-16-2011, 02:51 PM
I don't quite get why you said it didn't have a provision to retain horn.

as for airbag i do believe a member here said something about by passing both the connector with a resistor, 5ohms IIRC.

if it's just some little wiring for horns to work im interested.


To bypass the dual squib airbag you would connect two resistors across the two airbag connectors. 2.2 to 4.0 ohms are the typical values used for this purpose. As for the horn, with a hub adapter you lose the spiral cable (AKA clockspring). The spiral cable is a device that allows the horn and airbag wires to be able to be rotated back and forth without eventually snapping. Some hub adapters have their own version of a spiral cable to allow a horn switch to still remain on the rotating steering wheel. In a worst case, you could mount a switch to the dash and wire the horn to it.

cali yaris
03-16-2011, 03:17 PM
killer deal [bump]

Jason@SportsCar
04-14-2011, 11:09 PM
Update, found the horn wire harness for the NRG unit.

https://lh6.googleusercontent.com/_LvWc9cO2fpo/Taek7tH49iI/AAAAAAAAAcY/0NB8yH1TijU/s400/2011-04-14_18-50-54_273.jpg?source=androidclient

https://lh5.googleusercontent.com/_LvWc9cO2fpo/TaekxHBpOoI/AAAAAAAAAcU/2hiG-dErc9w/s400/2011-04-14_18-50-41_915.jpg?source=androidclient

Jerkratt
04-15-2011, 04:29 AM
consider the NRG hub and horn harness sold. PM me your paypal info so I can send the money

Jason@SportsCar
04-15-2011, 03:10 PM
consider the NRG hub and horn harness sold. PM me your paypal info so I can send the money

Sold, paid and shipped.

Thanks