Indicators not working

[iand227]

Hi lads, only new to this but I bought a 2006 toyota yaris 1.0 for my grand parents last night. It only has 13000km from new and is in perfect condition mechanically besides the indicatiors not working.

Now the hazzard lights work perfectly so its not something silly like bulbs and I have checked every single fuse I think in the car and still no joy:iono:

any help??

[willygoodness]

did u check them with a test light?

i had a blown fuse a little while ago and i checked all the fuses 3 times over and they were fine. Then someone told me to get one of these.

http://en.wikipedia.org/wiki/Test_light

while the fuse was plugged in and power on touch each side of the fuse with the tester.

hope that helps

[CTScott]

Your 2006 1.0L is a 2nd generation Yaris?

If so, the FLASH relay takes the inputs from the turn signal switch and the hazard switch and handles flashing the lights accordingly. Do you hear the relay clicking when you try to use the indicators?