Fender Flares

[Yarice]

I've been looking online for a while with no luck. Does anybody know of a company that sells fender flares for a yaris HB. I want to run a slighty wider and lower offset wheel.

[ilikerice]

i think ur will have to settle with the universal flares and have them cut to fit basicly.. i also been looking around and have not found any.. CaliYaris has flares on his and it looks nice.

[Yarice]

Yeah I saw Garms, I wouldn't mind thoes either if they work with the stock body without extensive modification.

[marcus]

sound like a group buy coming...wheres garm?? time to create the fender flares..lol

[enviri]

the fenders found in this

http://www.yaris-club.net/modules/Forums/files/dsc_0120_105.jpg
and
http://www.yaris-club.net/modules/Forums/files/lam_3837_resize_122_986.jpg

looks awesome

[Jerkratt]

where can you find those?

[bzinn 1]

If I remember correctly Garm used the flares from 1st gen xb....he had the guy make him a set that had 4 fronts as the rear flares on xB have the door cutout in them and dont lok right.

I tried on my buddies CF flares that he had sitting around this winter and they honestly are a near perfect match on the stock body,add body kit and you got a lot of trim work.

Hit up Garm he most likely has a great source for the xB flares.

[enviri]

after a little research it seems Team Autosports Thailand sells CF fenders, they might sell fiberglass/ABS versions too.

http://www.teamautosports.com/wp-content/gallery/yaris-accessories/dsc_2428.jpg

[cali yaris]

^ I can get those fenders in fiberglass, but they are stock width, no flare built in.

I used all-rear xB fender flares on my car, they work just fine with the stock body. I have two sets in stock.

[enviri]

well that's dumb. lol. a +3mm is small enough to go unnoticed and keep that stock look with that vent!

[bzinn 1]

^ I can get those fenders in fiberglass, but they are stock width, no flare built in.

I used all-rear xB fender flares on my car, they work just fine with the stock body. I have two sets in stock.


Garm think you posted wrong..thought those were the fronts you had a doube set made of for the car,cause the rear xB has the door cutout in the flare.

Also you have the vented fenders???????I am interested very interested.

[annn]

Vented fenders , fiberglass, I am interested !

[Jerkratt]

if you can get those fenders in carbon fiber consider a set sold

[wildmongoose26]

Seriously Jerkratt...check your pm's and i like those CF fenders

[Jason@SportsCar]

I've been looking online for a while with no luck. Does anybody know of a company that sells fender flares for a yaris HB. I want to run a slighty wider and lower offset wheel.

We used the Racing Lifestyle Miata flares.

https://lh6.googleusercontent.com/_LvWc9cO2fpo/TZT-_Q54SUI/AAAAAAAAAaA/2l5ek3gKF4s/s1152/WIR%20Rational%2002-2011%20216.jpg

[Jason@SportsCar]

^ I can get those fenders in fiberglass, but they are stock width, no flare built in.



Any idea on the weight of the fiberglass fenders?:drool: Carbon would be nice, but only if its the real thing - not the single layer of carbon over fiberglass, resulting in no weight savings. :frown:

[TEHxFALLEN V1.2]

The CF fenders would rock my world. I WANT.

[cali yaris]

Garm think you posted wrong..thought those were the fronts you had a doube set made of for the car

You're right, my bad.

@ Jason: I bet those carbon ones are not made for weight savings.

I'll ask about having some vented fenders sent with our next shipment.

[Yarice]

Im trying to contact Autokonexion to see if we can get a group buy going. There fender flares are the same as the ones from Racing Lifestyle. Check out this link http://www.autokonexion.com/miata-carbon-fiber-fender-flare-version-p-79.html?osCsid=0pk3vov5ue5r1f3tg2s5siten1. Im planning on getting the fiberglass ones cause there only around $250.

[Yarice]

Hey Garm mabe you can get a better deal with these guys.

[Jason@SportsCar]

You're right, my bad.

@ Jason: I bet those carbon ones are not made for weight savings.

I'll ask about having some vented fenders sent with our next shipment.

Always seems to be the case. :mad: We got a "carbon" hood for Philips Miata before he sold it... Weighed more than the stock aluminum hood.

[cali yaris]

Hey Garm mabe you can get a better deal with these guys.

Yes I can.

[cali yaris]

Both companies contacted. :thumbsup:

[annn]

Yea it funny but I always hear carbon this and that but really unless it's laid 100% with correct materials you not going to have a lightweight item. I go and have been since 1980s down with old school fiberglass mat resin and gelcoat... It can be very light and very strong , oh but carbon LOOKS so racer !! Lol

[Yarice]

Both companies contacted. :thumbsup:

Sweet

[LA Yaris]

This is the company that is making my CF Fender Flares for the Rear for my Sedan.

American Carbonfiber and Fiberglass (eBay)
americancarbonfiber1 (eBay)
americancarbonfiber@gmail.com

[JohnnyBomber101]

Keep us posted on the flares Garm!

[TickleTimeTim]

those would be sweet. subscribed.

[cali yaris]

I have the Miata flares on order now. :thumbsup:

This will be a very nice mild flare.

[TickleTimeTim]

what price range do you think we will be looking at?

[TickleTimeTim]

any eta or prices on the flares?

[cali yaris]

Slightly less than what they sell them for.

[iamrobbyah]

Oh sure, back in 08, I eluded to the desire to put flares on and dump the hell outta my hatch, and boy, did I get flamed. Seems like the community is finally coming around to the idea.

Guess I was ahead of the times =p