Stock/aftermarket Foglight Question?

[Yaris4L1fe]

Hey Gang,
wondering if anyone can tell me where i can purchase the stock foglight or if someone makes an aftermarket foglight that will fit perfectly in the foglight assembly area of my bumper? See alot on ebay for 08 & older but nothing for 2010 models. am i just better off going to the dealer? Thanks guys!!

[beZzZ]

U can check these out, very good quality

http://shop.microimageonline.com/Foglight-Kit-YARIS-Liftback-Sedan-Yaris-foglights.htm

http://shop.microimageonline.com/Projector-Foglight-Kit-YARIS-SEDAN-Yaris-sedanFL.htm

[Aarron_M]

Microimage for the win. :thumbsup:

[.Kevin.]

I have a 2010 and use garms posted pics in my cars thread too they are very nice

[Yaris4L1fe]

Appreciate the help & all the responses!!! Thanks guys!

[Yaris4L1fe]

hey guys!!! will any "06 - 09" sedan foglights work w/ my 2010??? Wondering if its all the same still? thanks!

[cali yaris]

^ YES they will.

[ATL_Want_A_Pabst]

Will the fogs in the this link http://shop.microimageonline.com/Foglight-Kit-YARIS-Liftback-Sedan-Yaris-foglights.htm fit the 2011 3door liftback???

[Yaris4L1fe]

^ YES they will.

thanks Cali!!!

[OTA'sTOY]

Will the fogs in the this link http://shop.microimageonline.com/Foglight-Kit-YARIS-Liftback-Sedan-Yaris-foglights.htm fit the 2011 3door liftback???

^ YES they will.
+1
ATL_Want_A_Pabst click the bezel select* box

[SKurj]

Will the fogs in the this link http://shop.microimageonline.com/Foglight-Kit-YARIS-Liftback-Sedan-Yaris-foglights.htm fit the 2011 3door liftback???

I think you need the bezels which you will have to order from toyota for those to fit.


Oops mebbe i was wrong... nvm

[Kiteless]

Hey so has anyone installed these fogs from Micro Image? The ones linked above?

http://shop.microimageonline.com/Foglight-Kit-YARIS-Liftback-Sedan-Yaris-foglights.htm

Any chance someone could e-mail me the PDF or what ever it is that they send you when you buy the kit? before I buy I want to see how involved it is. I have base 07 Yaris Liftback 3 door that I am slowly converting to a Vits RS.

- J

[OTA'sTOY]

Hey so has anyone installed these fogs from Micro Image? The ones linked above?

http://shop.microimageonline.com/Foglight-Kit-YARIS-Liftback-Sedan-Yaris-foglights.htm

Any chance someone could e-mail me the PDF or what ever it is that they send you when you buy the kit? before I buy I want to see how involved it is. I have base 07 Yaris Liftback 3 door that I am slowly converting to a Vits RS.

- J

why not just ask garm?

[PopsCar]

Diddo on the above. I need to install fog lights too! I like the projectors from Microimage. Is that something zI could self install? Do I have to disasemble exterior body panels. if so, do i need to lift the car?

[CTScott]

Here is the thread with the DIY manual from the MicroImage forum. Fogs are quite easy to install. You need to remove the bumper to do so, but removing the bumper is not as bad as it sounds.


http://www.microimageonline.com/forums/showthread.php/53-Fog-light-Instal-PDF

[Kiteless]

Sweet! Thanks so much. I am going to be giving MicroImage a lot of money of the next year. They have like 90 percent of all the stuff I wanna do to my little car.

[boooggy]

is the kit from garm working with a not wired car?

[CTScott]

is the kit from garm working with a not wired car?

All US/Canada Yaris are pre-wired. I believe that your European ones are as well.

[boooggy]

thank you scott.
i hoped that too, but some guy from service told me is not...
the car is 2010 production and it should be pre-wired.

[CTScott]

thank you scott.
i hoped that too, but some guy from service told me is not...
the car is 2010 production and it should be pre-wired.

Sometimes the service people's interpretation of pre-wired is wrong. Look at your under dash fuse panel. If the empty relay socket is attached to the side of it, then it is indeed pre-wired.