Horn upgrade

[blacks]

Hi

Will this toyota camry 2007+ Horn
Part#86510-AA010 fit on my 2007
Toyota Yaris Sedan version ?

Will it be a plug and play ?

Is there place where i could hear how it sounds
or can someone tell me if it sounds something like
the Toyota premium Horn ?

[sickpuppy1]

That looks like half a premium horn set (usually a dual hi/low configuration) And the bracket looks right for our car. Not sure of the plug ...cant be that different though. If you wondering about plug and play, I have to ask....you do realize your going to have to take off the whole front bumper area to do this dont you?

[blacks]

I have the Part number for the low note horn but I didnt put it

Yes I do realize that I have to take off the hole bumper already did that

When you get the answer for the plug and play can you let me know

[blacks]

I have the Part number for the low note horn but I didnt put it

Yes I do realize that I have to take off the hole bumper already did that

When you get the answer for the plug and play can you let me know

[sickpuppy1]

Well the connector is the same, but realize the yaris has only one horn, so if you get two you will need to either get another connector of figure it on you own. Maybe get another from a junk yard or ebay.

[Kongo-Otto]

It is more expensive but just get the premium horn kit. There is a kit that contains the necessary Y-cable to attach both horns to our car. I bought this kit some weeks ago and it is absolutely plug 'n play.

I bought it from this guy:
http://cgi.ebay.com/ebaymotors/JDM-TOYOTA-PREMIUM-HORN-CAMRY-LUV4-SEQUIOIA-IS300-LEXUS-_W0QQcmdZViewItemQQhashZitem1c1345f6cfQQitemZ12058 2436559QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

I can recommend him, received my kit in only 4 days from Japan to Germany.

[marcus]

i had mine for a year now dual horn and i think ive used it less than 10x... should have went with bull horn instead..lol

[blacks]

Thanks alot guys

[boooggy]

how does it sound?
the link that ebay guy provided for the premium horn is not available.......

[matthewai]

i have these (http://www.yarisworld.com/forums/showthread.php?t=32409)
post #33 has a video/sound clip i didnt use the rely either

i put both pics but they now are red side facing out (second pic obvi) it looks way better than when i first got them in

[Kongo-Otto]

how does it sound?
the link that ebay guy provided for the premium horn is not available.......

http://www.youtube.com/watch?v=YuxtrqPqHyc&NR=1

At the end.

[boooggy]

thx a lot

[Meteorite_Marty]

It is more expensive but just get the premium horn kit. There is a kit that contains the necessary Y-cable to attach both horns to our car. I bought this kit some weeks ago and it is absolutely plug 'n play.

I bought it from this guy:
http://cgi.ebay.com/ebaymotors/JDM-TOYOTA-PREMIUM-HORN-CAMRY-LUV4-SEQUIOIA-IS300-LEXUS-_W0QQcmdZViewItemQQhashZitem1c1345f6cfQQitemZ12058 2436559QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

I can recommend him, received my kit in only 4 days from Japan to Germany.
I use the same. Completely plug and play. Horn is fantastic.

I didn't even have to remove the bumper. Just popped out the top pins and pulled the front assembly forward to get my hands in.

[Revsson]

It is more expensive but just get the premium horn kit. There is a kit that contains the necessary Y-cable to attach both horns to our car. I bought this kit some weeks ago and it is absolutely plug 'n play.

I bought it from this guy:
http://cgi.ebay.com/ebaymotors/JDM-TOYOTA-PREMIUM-HORN-CAMRY-LUV4-SEQUIOIA-IS300-LEXUS-_W0QQcmdZViewItemQQhashZitem1c1345f6cfQQitemZ12058 2436559QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

I can recommend him, received my kit in only 4 days from Japan to Germany.

That's a good price. I bought mine last year from JDMpit.com and paid
quite a bit more. JDMpit had an e-Bay auction which was about the
same price, so I just ordered from their website. It took longer than
4 days for some reason. I'm pretty sure I paid less than the current price.
http://www.jdmpit.com/jstore/product_info.php?manufacturers_id=10&products_id=279
So again, that e-Bay price is pretty good.

[matthewai]

i got mine for like 23 dollars and i think it sounds better and looks better with the red showing through the grill than the toyota one just my o-pin

[Kongo-Otto]

i got mine for like 23 dollars and i think it sounds better and looks better with the red showing through the grill than the toyota one just my o-pin

The Hella Twin Tone sounds like the Premium ones. I can't hear any difference. It is red, not plug 'n play and cheaper. Thats all.

[matthewai]

its not to hard to wire them up though

[Betrivent]

horns are dead easy. Find a 12v battery, splice the wires, see which side is groun and power, then screw the ground into somethign near the front grill, and splice the power into the original horn. Done.

[matthewai]

^^^ BOOM

[Yaristeve]

It is more expensive but just get the premium horn kit. There is a kit that contains the necessary Y-cable to attach both horns to our car. I bought this kit some weeks ago and it is absolutely plug 'n play.

I bought it from this guy:
http://cgi.ebay.com/ebaymotors/JDM-TOYOTA-PREMIUM-HORN-CAMRY-LUV4-SEQUIOIA-IS300-LEXUS-_W0QQcmdZViewItemQQhashZitem1c1345f6cfQQitemZ12058 2436559QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccesso ries

I can recommend him, received my kit in only 4 days from Japan to Germany.

I bought the same kit a couple months ago from the same guy. I haven't had the chance to install them so I have no opinion on the sound but in terms of the seller, I too was surprised at how quickly I received my horns from Japan.

The kit is complete; it includes the "Y" connector with the correct OEM connectors as well as a grounding wire and even the nut/bolt for the second horn.

[coheed]

Horn upgrade you say? lol


http://www.youtube.com/watch?v=GEUxohFm6Jg

[ciscobear]

hey guys/gals why not get the Piaa horn kit from Amazon for cheaper? - http://www.amazon.com/o/ASIN/B00067BWBI/?tag=dp-us-20

[Yaristeve]

hey guys/gals why not get the Piaa horn kit from Amazon for cheaper? - http://www.amazon.com/o/ASIN/B00067BWBI/?tag=dp-us-20

I wanted to get a horn that sounded just like my IS300. I am not sure if the Ebay one sounds exactly like it but that is what the guy advertises. Plus, it is all plug and play because it is Toyota OEM so it uses Toyota connectors.

[RedRide]

hey guys/gals why not get the Piaa horn kit from Amazon for cheaper? - http://www.amazon.com/o/ASIN/B00067BWBI/?tag=dp-us-20

Yeah but, that is just one horn. The info is misleading/confusing about that.

The Toyota premium horn kit (from eBay) contains two horns at two different frequencys to give the clasic horn sound. It also contains the wire "Y" harness and mounting hardwar for a Toyota. It is a better value IMO.
It's what I installed in my Yaris an it's great. :smile:

[Klink10]

Anybody with pics of the premium horn kit installed? Trying to get a feel for placement as it sounds more and more like a good idea. Thanks (pics worth a 1000 words)

Just said the hell with it and got em. Need the pics now for ideas. Thanks

[Yaristeve]

Anybody with pics of the premium horn kit installed? Trying to get a feel for placement as it sounds more and more like a good idea. Thanks (pics worth a 1000 words)

Just said the hell with it and got em. Need the pics now for ideas. Thanks

If you go to the ebay auction in the link there are pictures there.

[RedRide]

Great choice.

Here's a DIY with pics. Scroll down the page.

http://www.yarisworld.com/forums/showthread.php?t=15662&highlight=horn+install

You do not need to remove the bumper if you do it as described. I had plenty of room doing it that way.

You can get creative as to how to mount the horns. You can drill another hole as shown.
However, I just made a small bracket (out of metal I had on hand) which I mounted both horns on.
I then mounted the bracket (with the horns mounted on it using the existing hole. This way I did not have to cut any plastic, etc.

[Klink10]

Thanks for the link and comments.

[Klink10]

Well got mine from the Ebay dealer as advertised. Spent today removing bumper and steam cleaning. Dressed all the plastic parts, installed the horns and put it all back together. Kit came with the bolt etc to fit the empty threaded hole left of the stock mount. Great sound. Thanks to all in this thread for replies and links. I appreciate it.

[enviri]

Yeah but, that is just one horn. The info is misleading/confusing about that.


I got that PIAA horn installed. its 2 horns, and you have to splice, or find a nifty way to connect them both.

[Scubaru Steve]

put in a set of hella supertones and call it a day!
http://www.youtube.com/watch?v=eES0b7MO-eQ&NR=1
makesure you use a relay!