PDA

View Full Version : Question:


Kitt
01-17-2007, 05:36 PM
Will this fit my car?
Or will this cause any trouble?
http://cgi.ebay.com/ebaymotors/4-5-TIP-HKS-HIPER-UNIVERSAL-PERFORMANCE-MUFFLER-EXHAUST_W0QQcmdZViewItemQQcategoryZ33636QQihZ020QQ itemZ300070167578QQrdZ1
http://images.andale.com/f2/127/115/13396688/1156535504419_1156380359499_MFRS344_st.jpg

Kaotic Lazagna
01-17-2007, 07:03 PM
check what your inlet size is. on that muffler you posted, 2.5" seems too big for a Yaris.

Doc Zaius
01-17-2007, 07:08 PM
What is "Austenintic Stainless Steel"?? :laugh:

bugnuts
01-17-2007, 07:25 PM
What is "Austenintic Stainless Steel"?? :laugh:

304 stainless is a high tensile strength stainless steel. "Austenintic" Is a mispelling, Supposed to be Austenitic which is a alloy mixture of nickel and chromium and special heat treating proccess. Not to be a smart ass or anything.. The 304 stainless part is the important part, Austenitic is just to sound fancy.:wink:

Doc Zaius
01-17-2007, 07:33 PM
304 stainless is a high tensile strength stainless steel. "Austenintic" Is a mispelling, Supposed to be Austenitic which is a alloy mixture of nickel and chromium and special heat treating proccess. Not to be a smart ass or anything.. The 304 stainless part is the important part, Austenitic is just to sound fancy.:wink:

Whooaaa hahahhaa... I was being a smart-ass! I thought it was "authentic" spelt really, really wrong! My bad! :redface:

Kitt
01-17-2007, 07:55 PM
in other words, not for the Yaris, right???

bugnuts
01-17-2007, 09:03 PM
in other words, not for the Yaris, right???

Sorry I don't know shit about mufflers...Just Metal:iono:

Kitt
01-17-2007, 09:18 PM
lolololol :bellyroll: :bellyroll: :bellyroll: :bellyroll: :bellyroll: :bellyroll: :bellyroll:

eco
01-18-2007, 09:49 PM
It will fit,if you get a muffler shop to install,(which will be cheap since you have the part already),they will make a custom fitting,then weld it up.

Black Yaris
01-18-2007, 09:57 PM
the muffler I am having installed tomorrow is pretty damn close to that, but when you have them install it have them replace from the muffler up to the resinator with 2 -2.25in pipe to get better flow and sound.. if you go just off the stock 1.5 pipe it may sound like a dirtbike

hasher22
01-18-2007, 10:08 PM
jdm "style" aka jdm ripoff....

yes it will fit if his a really good mechanic