Log in

View Full Version : shark fin antenna


jonhy_ sm
07-27-2011, 02:48 PM
hello guys, i bought this antenna, and I would like to know how to disemble the roof to assemble the antena.
how to pull the roof, and what else is there to pull?
I'm talking about a 2007 yaris hatch

http://i52.tinypic.com/ouqsdy.jpg
http://i55.tinypic.com/2lix8yd.jpg



regards

WeeYari
07-27-2011, 04:37 PM
1. Remove the center shoulder strap mount from the roof.

2. Carefully un-pop two clips holding the headliner in place along the upper hatch edge. you will now be able to stick your arm in there to access the underside of the antenna.

3. You can follow along the antenna lead and see that it disappears under the plastic c-pillar trim panel. The connector is under this panel and it needs to be popped off.