TANABE-MEDALION-TOURING-EXHAUST-

[rayy]

http://cgi.ebay.com/ebaymotors/TANABE-MEDALION-TOURING-EXHAUST-07-10-YARIS-HATCHBACK-?cmd=ViewItem&_trkparms=algo%3DLVI%26itu%3DUCI%26otn%3D5%26po%3D LVI%26ps%3D63%26clkid%3D3095836240890871948&_trksid=p5197.m7&item=190508573362

will this exhaust fit the sr/ts yaris? i.e will the tip line up with the gap in the rear bumper?

[WeeYari]

I measured ~410mm from the center of my car to the center of the Medallion tip. That should help you assess the horizontal positioning of the exhaust. Vertical can always be addressed by changing the urethane hangers if necessary.

[rayy]

thats great ill go have a look with your measurements.