Anybody used this double-din fascia?

[Yury]

I am thinking about using this

http://www.dynamicsounds.co.uk/connects-ct24ty22-toyota-yaris-silver-2007-stereo-fascia-surround-panel-p-15203.html

Someone here must've used this...How's the quality? Does the color match the stock silver? Fit ok, gaps even?

Thanks.

[minken]

I bought that from dynamics sound and its NOT CT24TY22! The hole for the stereo is 180mm wide, and does not work with Metra kit. (wich is 200mm wide)

And the quality was really crap!.. I ended up buying the Toyota genuin part and use the who back sidebrackets from dynamicsound.

I contacted dynamicsounds and they were total jerks, and didn't want to help!

[Yury]

My goal is not to use any kits, but have a standard narrower opening. I have an aftermarket double din stereo with a Scorche side panels sitting in the factory fascia. If I had the fascia that is 180 wide than my radio would fit without side panels.
No need for brackets for a double din unit...the factory ones work fine.

can you elaborate on bad quality?

[minken]

I see. It would fit then, but the quality is really poor. All the edges are very rough. How it would look mounted, I dont know..

[Yury]

^ thanks, sounds like I should leave it as is. which isn't really that bad.

Is my understanding correct - toyota doesn't make double din fascias for a liftback?

[WeeYari]

Are you aware of this thread? http://www.yarisworld.com/forums/showthread.php?t=15496&highlight=180

A bunch of us have these. They are genuine Toyota so fitment and finish is perfect. Some DDIN HUs do however experience fitment issues as the bezel opening is not true to North American DDIN spec.

[Yury]

Thank you.