Any one with 3pt Race harness?

[ezhacker1]

Im thinking of getting a 3pt harness as I cant have a harness bar in the car because of occupants on weekends.

1. With 3pt harness i can bolt the shoulder one to the rear passenger's bolt hole.
2. Of course when i have a passenger in the back, i would use the stock driver seat belt to keep the load on both seat belts even and no belts in front of people's faces.

Been 3 months Ive had stock seat belt on my bucket seat.

[mazilla]

You could do the cage that Garm sells(the one I have) with the removable harness bar. It's two easy to access nuts/bolts and the harness bar is out...takes all of three minutes.

[bzinn 1]

Bro....I am gonna say this very slowly.....ready....Passengers Are Over Rated.....sorry I had to....are you gonna use the harness for daily driving or just track days.

I ask because I can take my harness bar out in under 5 minutes and it works fine for AutoX track time.....

A decent 4 point or 5 point harness is about the same cost as a 3 point one of same quality....I spent a long time on the same question before I actually bought what I did.

[ezhacker1]

I haven't tracked yet. I just want better holding. I don't really want to get the cage even if it's remove able harness bar. 3 point seems simple enough, plus I'm looking at Corbeau one that is retractable, so I can use it DD and lock it down for spirit runs.

Yes having rear passengers suck

[cali yaris]

Just get the little lock for your seatbelt, I know lots of guys that race casually with that. Locks down your seatbelt as tight as you want. Problem solved

[ezhacker1]

CG Lock? I was looking at that, but i want the look of a harness too HAHA. that CG lock thing is 60 bucks..i could getto rig one for cheap but thats ghetto.

Looking at this corbeau harness: http://www.corbeau.com/products/harness_belts/2-inch_retractable_harness_belts/#

[mari]

How about this? http://www.soloracer.com/rallye3.html It bolts into the stock bolt location and has a quick release buckle. Some versions just click into the stock seatbelt buckles (dont know if they work for toyotas). And its DOT approved for use on the street.

[ezhacker1]

Yeah thats the same type I'm looking at, just cheaper from Corbeau. I want the retractable so I can have normal body movement for DD and I can lock it down for no movements.

In any case i need to decide on a color, black to match my black seats or Red to pop and they match my interior floor, cup holder and dash lights.