side marker lights

[yrsdrgn]

anybody take a chance at cracking open the side marker lights with a heat gun or something to replace the amber light with a hyper white light?

[Blenjar]

I don't think you needto crack it...there is a way to open it..read the manual..check it in the DIY forum, its online.

-- Blen

[ChinoCharles]

No, I'm pretty sure you do need to crack it.

Chris, its time to share your secret. :biggrin:

[Violin]

Yeah - spill it hopscotch.

[ChinoCharles]

"Hopscotch."

:laugh:

[Black Yaris]

Scotch? who's got some scotch.... I want some :)

[uncleyaris]

spill it man

[yrsdrgn]

ttt

[Kitt]

I tried to do the same and i almost broke it...

[yrsdrgn]

did you use a heat gun or the oven process?

[Chris07LB]

Stay tuned for the DIY Write Up. Its been a while since Ive done one... :rolleyes:

[yrsdrgn]

:thanks:

[Chris07LB]

Here's a little teaser to hold ya's.... :tongue:

My choice of replacement bulb was a 194 LED from HiLEDS.com of course. :biggrin:

[Kitt]

damn that's cool!!! :eek:

[yrsdrgn]

you're killing me chris!!!! NEED THAT DIY!!!!!:mad: :mad: :mad:

[vodkalush]

i still need to take the time and add side marker lights...

[uncleyaris]

LED on side markers would kick butt

[Chris07LB]

LED on side markers would kick butt


..... it already does. :biggrin:

[uncleyaris]

you and chino could tie for shit.......res. Let me in man!!!!!!! what did I miss
:laugh:

[Chris07LB]

Back up a page..... :rolleyes:

[yrsdrgn]

DIY!!!!!!!! that's the only light i need to swap out and my whole front end will be hyper white MAKE A DYI!!!!! ><

[eijikikimaru]

I think he meant to put a "please" at the end but was so excited he forgot ^_^

[yrsdrgn]

Yea I did mean to put a please. And yes I am excited about this and about tomorrow (Cusco coilovers!!) b(^^b)

[ChinoCharles]

Chris, you're a true fucking trailblazer.

Can't wait!

[ROCKLANDTOYOTA]

dammmmm that is bright.....

[bigsky2]

Been waiting for this for a long time..

It's no surprise Chris has done this mod.

Patiently awaiting your DIY and pics man :smile:

[hasher22]

wow can u guys get white repeating lights????

[Chris07LB]

Keep your skirts on fellas..

To make this DIY the best it can be, for as simple as it actually is, I ordered up a brand new side marker from the dealer, so that I could start fresh and repeat all the steps from start to finish.

Boy, the things I do for you guys.... :rolleyes:

Until then, here's another teaser. :biggrin:

[eTiMaGo]

lurvely!

LEDs FTW!

[d2dailly]

chris. how much was a new sidemarker that you ordered?

[uncleyaris]

i think we should start a donation for the guys who do all this testing

[ChinoCharles]

Psh, wouldn't THAT be nice. :bellyroll:

[mikeukrainetz]

i have to order new markers cause I cracked the housing try to pull it apart.

[yrsdrgn]

I got quoted $34 for a new pair of side marker lights from the SF dealership. Can't wait to see how to do this mod. As for testing, maybe the sponsors might want to pitch in for the people who are willing to go the extra mile to get a product sold (ie. the HiLEDs 194 led for the side marker):wink:

[Chris07LB]

In that case, ill have to dig up the 10 or so DIY's i've already posted... :rolleyes:

[uncleyaris]

Any info one these

http://cgi.ebay.com/JDM-WHITE-LED-SIDE-MARKER-LIGHT-YARIS-FIT-XA-XB-TC-F150_W0QQitemZ150094420055QQihZ005QQcategoryZ33715 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

[eTiMaGo]

Any info one these

http://cgi.ebay.com/JDM-WHITE-LED-SIDE-MARKER-LIGHT-YARIS-FIT-XA-XB-TC-F150_W0QQitemZ150094420055QQihZ005QQcategoryZ33715 QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Interesting, but they look kinda ugly... Mind you, we'll have to wait and see how Chris07LB's ones look when not turned on to compare :biggrin:

I'd still change mine to orange LEDs, it just seems safer in terms of visibility.

[uncleyaris]

I agree, just thought some people may be interested in these

[uncleyaris]

without starting a new thread, unless needed, does anyone have pics with LED in Stock Tails?

[eTiMaGo]

I remember a thread long ago about someone putting Spiderlite LEDs in their tails...

Or you could just buy off my old OEM LED taillights.. please? :biggrin:

[mikeukrainetz]

those ebay lights are another perfect example of whats wrong with ebay these days. Cheap parts and retarded shipping. Ive shipped cast manifolds for less than what theyre charging for an ounce of plastic.

[ROCKLANDTOYOTA]

I remember a thread long ago about someone putting Spiderlite LEDs in their tails...

Or you could just buy off my old OEM LED taillights.. please? :biggrin:
what do they look like?????

[[FR] Sébastien Loeb]

Keep your skirts on fellas..

To make this DIY the best it can be, for as simple as it actually is, I ordered up a brand new side marker from the dealer, so that I could start fresh and repeat all the steps from start to finish.

Boy, the things I do for you guys.... :rolleyes:

Until then, here's another teaser. :biggrin:

Hey Chris, did you get those off ebay? they look good, i may get them too.

[Chris07LB]

Sébastien Loeb;57581']Hey Chris, did you get those off ebay? they look good, i may get them too.


Get what? :iono:

Mine are stock side markers, opened up, and halogen bulb replaced with a HiLED 194.

[Chris07LB]

Interesting, but they look kinda ugly... Mind you, we'll have to wait and see how Chris07LB's ones look when not turned on to compare :biggrin:

I'd still change mine to orange LEDs, it just seems safer in terms of visibility.

Being that its a HiLED, there is no "ricer color" when in the OFF position. The LED I used is exactly the 194 I have in the parking lights. There is no "bulb" per-say... take a look in my 194 post, you will see what I mean. And being as our side markers are not exactly clear see-through, it looks just like stock, except for the hint of orange that the stock halogen bulb gives.

I will also be changing it to HiLEDs orange LED, as it looks lame with that being the only bright white blinking bulb in the car, and I do not wish to change the others.

All my blinking signals will be LED orange very soon. :wink:

[Violin]

Amber will look much better.

[eTiMaGo]

Being that its a HiLED, there is no "ricer color" when in the OFF position. The LED I used is exactly the 194 I have in the parking lights. There is no "bulb" per-say... take a look in my 194 post, you will see what I mean. And being as our side markers are not exactly clear see-through, it looks just like stock, except for the hint of orange that the stock halogen bulb gives.

I will also be changing it to HiLEDs orange LED, as it looks lame with that being the only bright white blinking bulb in the car, and I do not wish to change the others.

All my blinking signals will be LED orange very soon. :wink:

Yup, that's what I intended to say too :biggrin: LEDs that glow orange/amber, but remain colorless when off

[jdubau55]

wonder if this is legal in VA?????

[[FR] Sébastien Loeb]

I have ordered those from ebay in YELLOW for $25 USD total , i will let you guys know how they turns out once i get them.

3440

[Black Yaris]

Sébastien Loeb;57807']I have ordered those from ebay in YELLOW for $25 USD total , i will let you guys know how they turns out once i get them.

3440

Schlect:thumbdown:

[[FR] Sébastien Loeb]

Sie Kerle bumsen Homosexuelles

[ChinoCharles]

I have no idea what language that is, but it looks hilarious.

[Black Yaris]

Sébastien Loeb;57970']Sie Kerle bumsen Homosexuelles

Bist du Scwule?

[[FR] Sébastien Loeb]

Sie sind ein dummer Bumser

[BokChoi]

still waiting Chris I just ordered from HiLED, don't let me down.

[Chris07LB]

Working 4am to 6pm everyday, sorry if your DIY isn't ready done..

[yrsdrgn]

wow that's a lot of hours at work. take your time making the DIY we can all wait a bit longer. b(^^b) <--2 thumbs up!

[gravylegs]

I cant wait any longer! Get on it Chris!
JK

[Violin]

What are you doing between 6pm and 4am? Lollygagging?

[bigsky2]

Sir Violin, what is lollygagging?

[Jfoofoo]

Sir Violin, what is lollygagging?
lolly gag
To waste time, mostly by doing insignificant tasks for self ammusement. Also could be thought of as a slang for masterbation.

[jdubau55]

Since it has gagging in it and Violin said it....I dont want to know. ;)

[Chris07LB]

Sleeping.

New side marker due in tomorrow, will squeeze a DIY in for this super simple swap tomorrow night. :tongue:

[ChinoCharles]

Sleeping.

New side marker due in tomorrow, will squeeze a DIY in for this super simple swap tomorrow night. :tongue:

Thanks Chris! :cool:

[yrsdrgn]

Thanks Chris! :cool:


I second that!! :thumbup:

[Violin]

They don't have google in Canada? :rolleyes:

[Jfoofoo]

Can't wait.. my Hileds bulbs should be here soon...

[bigsky2]

They don't have google in Canada? :rolleyes:

No, we use something called "Goggle" and it's not nearly as informative :wink:

[Chris07LB]

DIY in an hour.....

[yrsdrgn]

YAY!!!!!!!!

:bow: :bow: :bow: :bow: :bow: :bow: :bow: :bow: :bow: :bow: :bow: :bow:

Thanks so much for showing us (one hour later) :thumbsup: :thumbsup:

Can't wait to see!!!:drool:

[Chris07LB]

dont thank me yet... as simple as it is to do, and completely safe and secure when done, most will puss out and keep them as is. :rolleyes:

[yrsdrgn]

I'm sure to do this "simple" mod as I've been dying to swap mine out to match my headlight housing (hyper white) set.

[Chris07LB]

http://www.yarisworld.com/forums/showpost.php?p=58958&postcount=1

:smile:

[evilreign]

Damn those side markers look good. Nice and bright too, I likes..

[gravylegs]

Thanks Chris! This is now on the list of things to do!

[reggaetonfreak]

thank you so much for this, i have a white lb too, lol

[Jerkratt]

i have spiderlite... tail light led's i have the 3 arm x2's wedge brake ones that fit the stock socket and im using the 5 arm x2 with my aftermarket tails diff socket. been trying to get rid of my 3 arms... cant use them anymore

[Chris07LB]

http://www.yarisworld.com/forums/showpost.php?p=58958&postcount=1

:smile:

bump 4 noobies

[Wirenut07]

Has anyone installed them on a sadan?

[cali yaris]

alright, another bump for the updated thread, since I sell these since those old days (smoked or clear):

http://shop.microimageonline.com/images/12254297340521119848198.jpg

http://shop.microimageonline.com/images/1225429716196125445153.jpg

http://shop.microimageonline.com/images/12254297367701689439020.jpg

[RagnaCaT]

Garm are these plug and play???

[bikegerm]

I installed these and love 'em. Here's a few pics. The connector on the right is the connector on your smoked leds'. It needs to plug into the connector on the left which is from the wiring harness inside the fender well. You'll have to slightly modify your connector on the smoked led lights. I used a dremmel tool to cut away the shroud exposing the pins. and they plugged right in to the wiring harness connector. I used some electrical tape to hold them together. Remember there is polarity here.

[cali yaris]

I just stripped the two wires, removed both harnesses, and taped it all together -- still working fine after a few months, only took 10 minutes per side.

[kimona]

I'm still waiting for someone to install some BMW sidemarkers... a popular mod in Japan.

[cali yaris]

that would be cool. I can also get Silvia side markers, which would rock!

:drool:

http://www.more-japan.com/files/d_54.jpg

[kimona]

Yup, the Sylvia side markers would be very cool!

[Jerkratt]

I'm still waiting for someone to install some BMW sidemarkers... a popular mod in Japan.

can u get a part number on those side markers... thers a BMW dealer right around the corner from my pizza delivery job in maywood... MIGHT be able to get a discount on them

[Kioshi]

Jerkratt, you should be the tester for those BMW side markers. It'd be perfect w/ your black setup ^_^. I'm waiting for those too.

[Jerkratt]

i printed out the picture of the markers... ima go there tomorrow cause its my day off and check it out

[Chris07LB]

I have a set here.. tried it years ago, and unless you flip them, and can cover some of the hole left behind in our stock fenders, "she no workie!"

[Kioshi]

how big of a hole is left when using the bmw side markers Chris?

[Chris07LB]

how big of a hole is left when using the bmw side markers Chris?

I would have to try it again.. it was years ago when I tried it with these new (same style posted) BMW side clears.

[kou]

to gap is big and they don't snap in place. tried already.

[Kioshi]

Can you take a pic of, if possible? I might be able to work around it if the gap is just a streak on the upper top of bottom half of the bmw side marker...

Nonetheless, i'll see what Jerkratt comes up with~

[Rotorheader]

PM Sent

[RagnaCaT]

I installed these and love 'em. Here's a few pics. The connector on the right is the connector on your smoked leds'. It needs to plug into the connector on the left which is from the wiring harness inside the fender well. You'll have to slightly modify your connector on the smoked led lights. I used a dremmel tool to cut away the shroud exposing the pins. and they plugged right in to the wiring harness connector. I used some electrical tape to hold them together. Remember there is polarity here.

Are those the smoked or clear?? They look great!

[Jerkratt]

ok i got a price... 20 bucks a piece.. looks like ALOT of beemers have them.. i gotta see if there all the same or if there differant in the back or not ima buy a pair most likely by the end of this week or next... and let u guys know. Kou what model bmw u get them off of?

[bxrich]

anybody know the diameter of the hole 4 the side markers

[kou]

ok i got a price... 20 bucks a piece.. looks like ALOT of beemers have them.. i gotta see if there all the same or if there differant in the back or not ima buy a pair most likely by the end of this week or next... and let u guys know. Kou what model bmw u get them off of?

i tried markers from a 2003 bmw3series they where to small.

[Jerkratt]

ok ima try and see if all of them are the same.. i see the x3 has them aswell

[RagnaCaT]

I installed these and love 'em. Here's a few pics. The connector on the right is the connector on your smoked leds'. It needs to plug into the connector on the left which is from the wiring harness inside the fender well. You'll have to slightly modify your connector on the smoked led lights. I used a dremmel tool to cut away the shroud exposing the pins. and they plugged right in to the wiring harness connector. I used some electrical tape to hold them together. Remember there is polarity here.

I just stripped the two wires, removed both harnesses, and taped it all together -- still working fine after a few months, only took 10 minutes per side.

Question why did you have to modify it??? mine was a simple plug and play??? Thanks anyway GARM!! Super fast shipping!

[bxrich]

anybody know the diameter of the hole 4 the side markers

:help:anybody :bow: i'm going to them on my sedan but need the diameter of the hole to cut it out :bow::bow::bow::bow::bow: or can anybody trace the hole and send it to me

[MadMax]

I just ordered a set from Garm, I so hate those cheap-o stock side markers and think the smoked ones from MicroImage will look so sweet on my Black Sand Pearl HB! :thumbsup:

I'll post pics once I get them on!

Cheers! M2

[bxrich]

I just ordered a set from Garm, I so hate those cheap-o stock side markers and think the smoked ones from MicroImage will look so sweet on my Black Sand Pearl HB! :thumbsup:

I'll post pics once I get them on!

Cheers! M2

:smoking: got the same one's (microimage ftw)

[StefanVVTi]

Can the white transparent plastic thing be removed from the housing and smoked?

[Kioshi]

ok ima try and see if all of them are the same.. i see the x3 has them aswell

Keep us updated, I'm in w/ you if this can be worked around easily. Thanks:headbang:

[Jerkratt]

will do ill be picking them up sometime next week.. hours got cut at work so i dont have the money this week

[Kioshi]

yea i feel you. I barely got 20 hours this week, had 8 hours to begin with :(
Side markers is my budget mod i can afford as of now~

[Jerkratt]

well i see that the suv's have slightly fatter side markers then the normal cars.. so im going to go to the dealer and take mine out and size them... im going to measure the hole opening aswell and bring a ruler with me to the dealer so i can see if there will be a gap

[Doc Zaius]

well i see that the suv's have slightly fatter side markers then the normal cars.. so im going to go to the dealer and take mine out and size them... im going to measure the hole opening aswell and bring a ruler with me to the dealer so i can see if there will be a gap

Easier idea... pop out one of your side markers, hold a piece of paper on the side of your car, and trace the outline of the hole. It'll be easy to see if the BMW marker will cover it then. :thumbsup:

[Jerkratt]

i went there today and got some part numbers... im going to go back next week and have them give me one of each and compair them.. the 3 series does not fit correct...

[Jerkratt]

2 1/2" x 1" is the opening of the fender

[MadMax]

alright, another bump for the updated thread, since I sell these since those old days (smoked or clear):

http://shop.microimageonline.com/images/12254297340521119848198.jpg

http://shop.microimageonline.com/images/1225429716196125445153.jpg

http://shop.microimageonline.com/images/12254297367701689439020.jpg

I got my set in the mail today (thanks Garm! :thumbsup:) and they are 'plug and play' but the other end of the harness has to be plugged in to a certain polarity so if they don't work just unplug 'em and swap the plug around to reverse what you had the first time!

Now, I could still use a little help. These new side markers are a bit loose on my car. The original ones were a tad loose; but these are much looser, almost to the point where you can pull them off the car quite easily. So, I was wondering if 1) anyone else had this problem, and 2) if they did, what did they go to fix it?

Cheers! M2

[MadMax]

OK, no advice then, huh? I was wondering if some silicon adhesive or sealant would be the way to go...thoughts?

By the way, I went outside now that is dark and this is when the side markers that Garm sells really shine! They are much brighter and noticeable than the stockers, and a heckuva look cooler looking! The blend in much better on my black hatchback, I'll take some pics over the weekend to show everyone.

This is a great mod, easy to do and not too expensive!

Cheers! M2

[kou]

Just paint the stock ones with TAMIYA PS-31 SMOKE great results and very easy, still shine super bright at night and day had them on for two years and they look like they were done yesterday.

[cali yaris]

madmax, I would use a spot of silicone to get those to not move around.

kou, those look pretty good!

[kou]

Thanks cali.

[StefanVVTi]

@ kou: they look very nice! how did you take the part to be smoked off the whole thing?

[MadMax]

I did the same thing as kou with a set of flush motorcycle turn signals, except using orange paint (the bike is orange where they are), also Tamiya. I will see if I can find the instructions but it is pretty easy. It is pretty much remove the marker lights (easily done), cut some cardboard so only the outside is exposed (make the holes like the ones in your fender), and put on numerous light coats letting dry for about 10-15 minutes between each. Continue to do so until you reach the desired color.

Garm, thanks for the tip on silicon, I will get some today. The marker lights you sold me look excellent!

Cheers! M2

[StefanVVTi]

Did you spray them on the outside?

[kou]

Did you spray them on the outside?

yes, just take them off the car clean them then spray them.

[Kioshi]

2 1/2" x 1" is the opening of the fender

What side marker of the SUVs did you compare? The X3 or the X5? Or even maybe the X6....

thanks for the sizes bro.

[Danish Yaris]

Hi

In Europe the side markers are clear on the Toyota Yaris. If anybody need a pair I can buy them for you and ship them.

Regards Steven.

[StefanVVTi]

yes, just take them off the car clean them then spray them.

Thanks a lot! :cool: I`ll probably do them next weekend!

[MadMax]

Hi

In Europe the side markers are clear on the Toyota Yaris. If anybody need a pair I can buy them for you and ship them.

Regards Steven.

Steven

The side markers in the US are clear as well, they are the same ones I saw in Germany, Austria and the UK; which is why folks here are painting or replacing them...

But it was very nice of you to offer! :thumbsup:

Cheers! M2

[Danish Yaris]

Hi

Ok, I thought they were yellow in the states.
I work at Toyota in Denmark, so if you need some special European parts I can help you guys.

Regards Steven.

[Klink10]

Hi

Ok, I thought they were yellow in the states.
I work at Toyota in Denmark, so if you need some special European parts I can help you guys.

Regards Steven.

Thanks....I saw somewhere here that a person from Cypress had posted a kit for the hatchback from Toyota used in lieu of the rear seat for utility type work. I tried contacting him but he never came back. Have you ever seen anything like this where you are? US has no idea what it is and the part number when I checked didn't ring any bells. Thinking maybe it's a Europe accessory.

[Jerkratt]

ok so i got the side markers and the connectors from bmw mad cheap found someone who works there... im in the proses of dremaling the side markers a bit... the plastic on the back is a little to wide

[kimona]

Jerkratt, looking forward to an installed pic.

[Danish Yaris]

Thanks....I saw somewhere here that a person from Cypress had posted a kit for the hatchback from Toyota used in lieu of the rear seat for utility type work. I tried contacting him but he never came back. Have you ever seen anything like this where you are? US has no idea what it is and the part number when I checked didn't ring any bells. Thinking maybe it's a Europe accessory.

Hi

I have sent a PM to you.

Regards Steven.

[Jerkratt]

^ u got part numbers? i would like to know info aswell :D

[Kioshi]

Jerkratt you came through! If you can, do a simple DIY for it please. I can do this at work if a dremel is all that is needed :D

[Jerkratt]

u got it still working on the dremaling.. at work atm on my cell so yeah but it will be done! and when it is pics for everyone! hehe

[cali yaris]

"dremaling"? sorry, but LOL

[Kioshi]

awesome. Its the quality of his work I'm looking for, not his words lol. Btw, how much did the side markers and connectors end up costing you?

[RagnaCaT]

:needpics: :coolpics: :thanks:

[RagnaCaT]

"dremaling"? sorry, but LOL

LOL, I wrote that once and got flamed but I got a 2nd grade English from Orange, New Jersey :smile:

[cali yaris]

Orange, New Jersey (LOL)

http://maps.google.com/maps?f=q&source=s_q&hl=en&geocode=&ie=UTF8&layer=x&g=Orange,+NJ&ll=40.770313,-74.232437&spn=0.050247,0.077248&z=14[

[RagnaCaT]

Orange, New Jersey (LOL)

http://maps.google.com/maps?f=q&source=s_q&hl=en&geocode=&ie=UTF8&layer=x&g=Orange,+NJ&ll=40.770313,-74.232437&spn=0.050247,0.077248&z=14[

LOL this where I got my mayor in the 2nd grade English I know:
http://www.privateschoolreview.com/school_ov/school_id/17562

Back to topic pics?

[kimona]

I wonder what's happened to Jerkratt and the side marker light project?

[Kioshi]

Jerkratt! how'd the side marker light project turn out dude?

I'll pm him..

[Jerkratt]

i made a video as well. sorry i didnt really take the time to take step by step pictures
http://img.photobucket.com/albums/v662/everdying69666/My%20Yaris/My%20Yaris%20Videos/th_122.jpg (http://smg.photobucket.com/albums/v662/everdying69666/My%20Yaris/My%20Yaris%20Videos/?action=view&current=122.flv)

[cali yaris]

That's pretty cool!!

[BLAZINBLUEVITZ]

did you take them off recently? garden state show picture doesn't show them?

[cali yaris]

maybe he only has the right one on :wink:

[BLAZINBLUEVITZ]

that would be JERKRATT:laugh:

[Jerkratt]

otherone will be on by street wars... have not had the time to finish dremaling the otherside

[bxrich]

:help::help::help::help: need the diameter and mesurements so i can cut and install mine got them from sard from garm thanks

[Jerkratt]

2 1/2" x 1" is the opening of the fender

[BLAZINBLUEVITZ]

otherone will be on by street wars... have not had the time to finish dremaling the otherside
:redface: sorry to blow up the spot there but i wanted a better look and noticed. take some pictures of street wars as i'll be sitting out.

[Kioshi]

its all good. Looks hella nice dude. When you do get the chance, could you take a pic of one popped out just so i could see the cut, cause a DIY is sorta late now anyways :P...
unless Bxrich can provide everyone one on here ^_^

[Jochen]

I just got my smoked side repeaters. Looks like they're the same like garm sells, but mine were plug & play... Maybe EU connectors are different?

http://www.de-smet.net/yaris/pinker1.jpg

http://www.de-smet.net/yaris/pinker2.jpg

http://www.de-smet.net/yaris/pinker3.jpg

[cali yaris]

yes, you have compatible connectors, USA cars don't. Looks good!

[MadMax]

yes, you have compatible connectors, USA cars don't. Looks good!

Eh? :iono: I thought the ones I got from you--which look the same--were plug and play! Were the ones I got different?

Still, I love 'em! :w00t:

[cali yaris]

I had to cut and wire mine with electrical tape -- so I don't know... :iono: