polished fuel rail

[cali yaris]

Just got these in stock, posted to the store, here's a pic

http://shop.microimageonline.com/images/GE-fuelrail-1.jpg

[Yoda]

^^^Yes its here people jump on it!

[packetrace]

does it come with spacer ?

[cali yaris]

^ No, the spacer will depend on what injectors are used. I'm using about a 1/2" on my set up. Spacers are readily available from Grainger and McMaster.

[packetrace]

What is the size of in and out ?

[cali yaris]

-8 AN. This rail has the largest inside capacity and flow possible.

[packetrace]

do you have parts lists to fit ...

line

-6an fittings

[cali yaris]

^ Not sure what you're asking for. [edited the size] -8AN fittings left and right, at least one 90-degree one for passenger side. Fuel lines. Bolts and spacers. Injectors with O rings.

[packetrace]

have pics of yours :D i am visual :)

[cali yaris]

You should read this whole thread.
Here's a link the page that has the pics you're asking for:

http://www.yarisworld.com/forums/showthread.php?t=29053&page=29

[kou]

Ordered mine should be here monday. Maybe one day this year i will have my turbo installed still need a few more parts.

[1.5]

so blingy :drool:

[pimp my yaris]

Its actually a -8an female hole on each side. There huge.

[KCALB SIRAY]

Its actually a -8an female hole on each side. There huge.

"They're".....sorry.....carry on:biggrin:

[packetrace]

-6an......that is what was told me..

[Golddeenoh]

pimp has one, maybe it is a special one just for him, hmm seems like 2 different sets of information.

[cali yaris]

Pimp got the same one as the rest of the production run, just not polished. If he says it's -8, then they are all -8.

Garm

[packetrace]

Pimp got the same one as the rest of the production run, just not polished. If he says it's -8, then they are all -8.

Garm

Sorry all....I wass told me it was -6an....

[Golddeenoh]

it is just huge, ok :P

[cali yaris]

Probably my fault, I thought it was -6AN, but I didn't measure it. Should have waited for pimp to post first.

-8AN

[pimp my yaris]

I bought some -8 to -6 male fitting to go in the ends of the rail. -6an is enough flow for 800hp. I think that should cover it.:bellyroll:

[pimp my yaris]

Got almost all my fittings together. I just need to get to work. I been feeling a little lazy lately.

[cali yaris]

Looking good Aras/xbgod, would be nice to see one post without your usual sarcasm though.

I'll check the fittings tomorrow morning.
Pimp has one in hand though, and if a -8 fits his, they are all made the same.

[XFACOR]

You know it! go big or go home at this point.

But please let your customers know it is 3/4 boss fitttings. You don't need any problems from a faulty install.

[packetrace]

So both end of fuel rail are -8an....but like pimp said....you put an adaptee -8 to -6 on each end...and them run -6an hose with appropriate hose ends ...

Am i right ?

Garm can you get the adapter from the hard stock line to -6an fittings ?

[cali yaris]

I can provide you with all the fittings based on whatever set up you want.

[packetrace]

I can have good prixe on hoses and fittings here in quebec...if you dont mind :)

Fuel rail will come from you of course :)

[packetrace]

Got almost all my fittings together. I just need to get to work. I been feeling a little lazy lately.

Have a list of everything needed ?

How much lenght is the hose ?

What is this fuel regulator ? it looks good

[pimp my yaris]

So both end of fuel rail are -8an....but like pimp said....you put an adaptee -8 to -6 on each end...and them run -6an hose with appropriate hose ends ...

Am i right ?

Garm can you get the adapter from the hard stock line to -6an fittings ?

Yes you are 100% correct. I am going to run -6 fuel as a feed line and return line. You can also run a -6 feed line and use the stock fuel line for the return, like Garm. The regulator in the picture is a Areomotive. I dont know how much it cost. I got it used from a friend. This is what I got so far.

http://www.ebay.com/itm/Turbosmart-liquid-filled-pressure-gauge-100psi-0-7-bar-meter-efi-injection-honda-/150855623639?_trksid=p4340.m1850&_trkparms=aid%3D222001%26algo%3DSIC.CURRENT%26ao%3 D1%26asc%3D11%26meid%3D659102754268557507%26pid%3D 100011%26prg%3D1005%26rk%3D1%26

http://www.ebay.com/itm/170856323241?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

http://www.ebay.com/itm/180839939544?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

http://www.ebay.com/itm/230400476291?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

http://www.ebay.com/itm/180864287470?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

http://www.ebay.com/itm/310232698361?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

http://www.ebay.com/itm/180846322388?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

http://www.ebay.com/itm/260896688867?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649

The bulkhead fitting will go in the top of the pump. I may also buy a -6 inline fuel filter.

[packetrace]

Thank you pimp for all the information!! Which are very usefuel!!!

I could have waited for the fuel rail....but I was curious I like to know what to be waiting for....and you are right...these fittings are probably the same as the one they sell double price on summit racing or something :P

[pimp my yaris]

-an thread size conversion chart

http://www.gre6.com/ansize

[Golddeenoh]

it is cool what you are doing to your xB but I would prefer to see what you can do to a Yaris. 1 toasters don't seem very aerodynamic, where the Yaris is more aerodynamic than an xB (granted still not the most aerodynamic choice). 2 most people on here have a Yaris and would like to see your skills at working in the smaller engine compartment. just some input for ya "XFACOR".

[cali yaris]

I'm pretty sure we only took off the drivers side ear. On the passenger side, a 90-degree fitting cleared.

[Golddeenoh]

maybe you did it wrong :P

[cali yaris]

http://www.microimageonline.com/images/products/engine/GoldenEagle/fuelrail2.jpg

[Golddeenoh]

couldn't you notch the ear instead of removing it or would that still cause -8 clearance?

[packetrace]

«PIMP i want to see picture of wen you gonna build your pump assembly :)

[fase4]

This fuel rail have any benefit? I dont know anything from aftermarkets fuel rail, can anyone explain me?

[pimp my yaris]

The bigest benefit is that you can add a return line and adjustable fuel pressure regulator. It will also flow more fuel that you will need with a turbo.