New fog lights installed

[Cutie Pie #2]

Got a great deal on some fog lights that come with everything needed to make them work on ebay I got these for $38 with free shipping, just got them professionally installed for $100. I was going to install myself but just didn't want to deal with it. http://www.ebay.com/itm/JDM-06-09-TOYOTA-YARIS-3DR-5DR-CLEAR-FOG-LIGHTS-KIT-w-SWITCH-/200794841049?pt=Motors_Car_Truck_Parts_Accessories&fits=Model%3AYaris%7CYear%3A2008%7CMake%3AToyota&hash=item2ec04e1fd9&vxp=mtr#ht_4557wt_975
Sorry for the large photo!
47915

[LikeCaseyJones]

Nice! How are they at night? I need to get some.

[Cutie Pie #2]

They are bright enough for what they are! I'm overall pleased with them.

[1.5]

EBay fogs ftw that's where mine came from.

[willygoodness]

if you don't like how bright they are, you could always put in some HIDs. i've had 55w ones in my ebay fogs for nearly 2 yrs no problems at all. lights up all over the place (Y)

[jpmck03]

Got a great deal on some fog lights that come with everything needed to make them work on ebay I got these for $38 with free shipping, just got them professionally installed for $100. I was going to install myself but just didn't want to deal with it.
...

Looks good... any time I see a Yaris without them I think that something is missing! :thumbsup:

[1.5]

if you don't like how bright they are, you could always put in some HIDs. i've had 55w ones in my ebay fogs for nearly 2 yrs no problems at all. lights up all over the place (Y)

I am planning on this too

[g.q.vios]

Will these work on a 2010 sedan????

http://www.ebay.com/itm/06-08-TOYOTA-YARIS-4DR-SEDAN-CLEAR-BUMPER-DRIVING-FOG-LIGHTS-LAMPS-KIT-W-SWITCH-/200801981509?_trksid=p4340.m1850&_trkparms=aid%3D222001%26algo%3DSIC.CURRENT%26ao%3 D1%26asc%3D11%26meid%3D1288533320413208808%26pid%3 D100011%26prg%3D1005%26rk%3D4%26

:respekt:

[Kaotic Lazagna]

Will these work on a 2010 sedan????

http://www.ebay.com/itm/06-08-TOYOTA-YARIS-4DR-SEDAN-CLEAR-BUMPER-DRIVING-FOG-LIGHTS-LAMPS-KIT-W-SWITCH-/200801981509?_trksid=p4340.m1850&_trkparms=aid%3D222001%26algo%3DSIC.CURRENT%26ao%3 D1%26asc%3D11%26meid%3D1288533320413208808%26pid%3 D100011%26prg%3D1005%26rk%3D4%26

:respekt:

Aren't the foglights for the 2010 sedans shaped slightly different from the 07-08?

[1.5]

I heard the same ^

[g.q.vios]

damit thanks guys then going to have to dish out 100$$$ :thumbdown:

[CTScott]

The fog lights themselves are identical. It is the plastic trim pieces that changed.

[g.q.vios]

thanks scott...

[Kaotic Lazagna]

The fog lights themselves are identical. It is the plastic trim pieces that changed.

In that case, g.q. is better off buying the foglights by themselves vs to buying a kit that includes the bezel already, right? Probably save some money that way.

[PatrickJohnson]

^---That's certainly one way to go. You can get the bezels separately on ebay all day long and for pretty cheap too.

[CTScott]

Actually, looking again at the EPC, 2006-2011 Sedans are all the same for both the lights and the trim (and, that's how they are shown as well on MicroImage's listing):

http://shop.microimageonline.com/Foglight-Kit-YARIS-Liftback-Sedan-Yaris-foglights.htm

[g.q.vios]

are you sure ct dont want to spend 100 when i can spend 40$$

[CTScott]

are you sure ct dont want to spend 100 when i can spend 40$$

Yes. But, the difference between these $40 ones and the MicroImage $100 kit is that the MicroImage one includes the wiring pieces developed by Ray (1NZYaris1), which allow you to install them using the existing factory wiring through the firewall.

If you are installing them yourself this saves a large amount of work, as the $40 kit will require you to pull the battery and wiper tray to get at the firewall grommet to run the harness through the firewall.

To modify the $40 kit to use the factory wiring you would need to purchase the two pins for the under-hood fuse panel connector ($12+ each) and the fog light relay for the under-dash fuse panel ($20).

[1.5]

I had to go through my firewall with my eBay fogs gq. I remember you saying you weren't comfortable with rolling/pulling fenders so this may not be something you want to undertake. It took me >5 hours but I'm not the best at wiring/electrical either.

[CTScott]

I had to go through my firewall with my eBay fogs gq. I remember you saying you weren't comfortable with rolling/pulling fenders so this may not be something you want to undertake. It took me >5 hours but I'm not the best at wiring/electrical either.

Whereas I installed a set of Micro Image ones on Crashy2 last night in less than an hour. That involves a couple of tricks though, that I've leaned over time, like only disconnecting the top of the bumper, rather than pulling the bumper entirely off.

[1.5]

O that's a good one Scott I will try that next time.

[Kaotic Lazagna]

I'm a little confused, here is a "stock" photo of a 2010 sedan:

http://static.cargurus.com/images/site/2009/11/02/12/10/2010_toyota_yaris-pic-8466891094462082956.jpeg

Here is my 2007 sedan:

https://sphotos-a.xx.fbcdn.net/hphotos-prn1/s720x720/540014_4105333758009_377939397_n.jpg


The 2010's bezel looks completely different from mine.

[CTScott]

I'm a little confused, here is a "stock" photo of a 2010 sedan:

http://static.cargurus.com/images/site/2009/11/02/12/10/2010_toyota_yaris-pic-8466891094462082956.jpeg

Here is my 2007 sedan:

https://sphotos-a.xx.fbcdn.net/hphotos-prn1/s720x720/540014_4105333758009_377939397_n.jpg


The 2010's bezel looks completely different from mine.

That's not a plain 2010, it's a 2010 S, which would come with fogs from the factory. The non-S 2010's had the same fog light trim as the pre-2010s.

[Kaotic Lazagna]

That's not a plain 2010, it's a 2010 S, which would come with fogs from the factory. The non-S 2010's had the same fog light trim as the pre-2010s.

lol, wow, an S model that's actually quite different than the other trim levels. :laugh:

So all non-S sedans are basically the same with the exception of the front top grill?

[1.5]

That and wheels/hubcaps are the only differences I've noticed.

[cali yaris]

Does anyone on here have an 'S' sedan? I've never seen one in person.

[g.q.vios]

Yes. But, the difference between these $40 ones and the MicroImage $100 kit is that the MicroImage one includes the wiring pieces developed by Ray (1NZYaris1), which allow you to install them using the existing factory wiring through the firewall.

If you are installing them yourself this saves a large amount of work, as the $40 kit will require you to pull the battery and wiper tray to get at the firewall grommet to run the harness through the firewall.

To modify the $40 kit to use the factory wiring you would need to purchase the two pins for the under-hood fuse panel connector ($12+ each) and the fog light relay for the under-dash fuse panel ($20).

yeah ur right ill just fork out the 100$ to M.I and support or guys :drinking:

[Kaotic Lazagna]

Does anyone on here have an 'S' sedan? I've never seen one in person.

Only one I knew of was Adejong (sp?). He had Work CR-Kai wheels, Bride seats, and some other goodies. He since parted out his car and...well, not sure. lol

[Kaotic Lazagna]

His was an 09 S sedan

http://www.yarisworld.com/forums/showthread.php?t=28385

[g.q.vios]

Only one I knew of was Adejong (sp?). He had Work CR-Kai wheels, Bride seats, and some other goodies. He since parted out his car and...well, not sure. lol

I've never seen one ethier!!!!

[g.q.vios]

I had to go through my firewall with my eBay fogs gq. I remember you saying you weren't comfortable with rolling/pulling fenders so this may not be something you want to undertake. It took me >5 hours but I'm not the best at wiring/electrical either.

Nah the wiring part i got im good with the electrical I have my amp cable runing through the firewall... My day time running lights i have them hooked up to the parking lights so when ever im driving i just click once for day use and twice for night use... I love messing with wires its fun.. I wired my whole car audio system myself too... It's my first love...:wub:

[808Yaris07]

Hey guys...so for my 2007..best bet is to get the 100.00 kit? I don't have fogs in mine right now..

[sickpuppy1]

Now I bought a set off ebay, but now instructions on wiring hook up. Has the wiring with plugs on ends but no idea where your supposed to hook it all to. Is the spot for sedan switch supposed to be on center console right behind the traction control button? Looks like a switch knock out is there. I'm sure I can fumble through it. looking for more confirmed Ideas of where to go with it. Where is the factory wiring hook up at firewall?