C-one tower bar installed

[jimcat]

a C-one tower bar was brought from japan,
Its quite difficult for DIY install and I used for one hour
after installation, I found that the pole is not hard as i expected.
will be little bit curved when I push a hand on it
Anyway, it surely good looking at all.

[jamal1984]

a C-one tower bar was brought from japan,
Its quite difficult for DIY install and I used for one hour
after installation, I found that the pole is not hard as i expected.
will be little bit curved when I push a hand on it
Anyway, it surely good looking at all.

is installed this will help your car at anything at all? I mean i don't know why alot peoples install it. Thanks

[jimcat]

ha ha... i am not enough pro to say the different. i feel nothing changed. may be its a superstition to make driver confidence

[aucorium]

it is suppose to make the chassis more rigit and less movement between the struts , it should impove your handling especially through the corners

[St_G]

Our body rolls side to side like a motherfucker, but it doesn't really seem to flex all that much, even under spirited driving. At least not to me.

[magoo_lc1]

One piece does not do miracles. Its like putting together a puzzle. Get the struts, tires, springs front and rear sways and then drive.

[forpinks]

that should be the last thing you put in that puzzle... install lowering springs with a 30% difference in stiffness first... :wink:

I think this should lower the vibration from the road a "tiny bit" more, as what I've observed from my 00 Kia in the Philippines although that has a go-kart coil-over welded to it, its custom fabricated by a 17yr old kid at the machine shop and powder coated in Skyline Blue at a "motorbike shop... LOL!:biggrin: