Fishing an AV wire down B pillar

[redyaris]

Im installing a Sony PS2 system under the right front pax seat on the floor.

I want to run an AV (2 plug) output wire from my new DVD system mounted at the dome light down to the right front passenger seat floor via the right B pillar...I have fish tape to use for this.

Question: what will I run into in the roof? In the pillar? Is the B pillar trim easy to remove? How do I do this?

[punch]

Im installing a Sony PS2 system under the right front pax seat on the floor.

I want to run an AV (2 plug) output wire from my new DVD system mounted at the dome light down to the right front passenger seat floor via the right B pillar...I have fish tape to use for this.

Question: what will I run into in the roof? In the pillar? Is the B pillar trim easy to remove? How do I do this?

yes it should just pry off, no big issue.

[spkrman]

easy, panel pops off and the clips dont break.

[redyaris]

Will I have to unscrew the seat belt bolt?

[IllusionX]

i know with my echo, i had to unscrew the seat belt bold to completely remove the B pillar. i haven't really looked into the yaris, but i imagine them to be the same.

but you really want to FISH, or just remove the pillar and have the whole access to put your wire??

[redyaris]

I bought the fish tape for the roof section. I dont know what I will run into in there from dome light opening over to B pillar. Perhaps Violin can advise from his moon roof install...im not too worried about the B pillar if the trim does indeed pop off and on easily.

I love this forum!

[spkrman]

Will I have to unscrew the seat belt bolt?

yea definitely.