Part # Matching

[jmew0ng]

I'm trying to find the part number for the 09-11 RS Front bumper... and I wanted to know if anyone could confirm this for me.

I got this link off of one of the threads
http://www.toyodiy.com/parts/p_J_2010_TOYOTA_VITZ_NCP91-AHMVK_5201.html

but does this part number

52119‑52640‑A0


match up to this type of bumper
http://cdn.speedhunters.com/wp-content/uploads/2010/02/HKSPD10-261.jpg

[CTScott]

That is correct.

[jmew0ng]

If I'm trying to make the conversion from 07 us --> 09 jdm rs bumper, do I need to get those other parts as well? Or can I just get the bumper and part out any usdm attachments (aside from getting headlights and that new crash bar)

and is that lip listed in there? Or does anyone know the part number to that?

[WeeYari]

There is a chance that the black wheel well liners will have a wonky fit. I swapped my pre-'09 facelift rear bumper for one from a '10. The liner didn't line up quite properly at the very bottom due to a slightly different curve in the bumper.

[CTScott]

If I'm trying to make the conversion from 07 us --> 09 jdm rs bumper, do I need to get those other parts as well? Or can I just get the bumper and part out any usdm attachments (aside from getting headlights and that new crash bar)

and is that lip listed in there? Or does anyone know the part number to that?

Besides the bar you would need the upper grill (53111-52610).

The lip is not in the JDM EPC.

[enviri]

upper grill, lower grill, tow hook cover, fogs (if you dont have em already) -- the front lip is modellista.

[ilikerice]

07-08 had slightly different headlight gaps then the 09-11.. unless the JDM is the same from 07-11.. All you gotta do is get the 09-11 headlights instead of using the 07

[jmew0ng]

07-08 had slightly different headlight gaps then the 09-11.. unless the JDM is the same from 07-11.. All you gotta do is get the 09-11 headlights instead of using the 07

yeah this is what I'm planning on doing, I just really like the look of that RS bumper.. don't know a body shop that could do a good fitment for the replica and I just happen to know people in HK... so I figured I'd take a shot at asking them on part numbers and see how much of a cost difference i'll get.

WeeYari, is it wonky enough to make the part over the tire rub? I'm okay with a "not so perfect" fit on that part as long as I don't rub

and thanks everyone for the responses!

[ilikerice]

If I'm trying to make the conversion from 07 us --> 09 jdm rs bumper, do I need to get those other parts as well? Or can I just get the bumper and part out any usdm attachments (aside from getting headlights and that new crash bar)

and is that lip listed in there? Or does anyone know the part number to that?

Sorry, I totally missed that sentence in your post.

[thebarber]

09-11 front bumpers will fit on 06-08 yarii with very minor modification. The front plastics for 07/08 USDM yarii should work fine on 09-11 bumpers...they did on mine

[jmew0ng]

Oh I guess another question while I'm still hunting down for these parts....

the side skirt on the picture, is that a vitz rs side skirt? or maybe one from modellista?

[pj. olsson]

I think it`s the modellista one....

Greez from Germany

PJ.

Visit my Homepage: www.germanvitzrs.jimdo.com