PDA

View Full Version : i need this speedometer


yazeed1989
11-27-2012, 12:20 PM
hello

i need this speedometer

http://www.toyota4arab.com/upload/i/00010/lvosjhf5ir76.jpg

thank you

CTScott
11-27-2012, 12:48 PM
I have a feeling that that picture was photoshopped. That looks like the standard metric version with the inner MPH ring phtoshopped over. If you look at my video below, I am running a real one of those clusters, with a device that I created which allows the speedometer to display in MPH on the outer ring (i.e. while being pulled by a Lamborghini you would see the needle make it to the 200 MPH mark) and also increment the odometer in Miles, rather than kilometers.

http://www.youtube.com/watch?v=KkUOgEvTYAY&list=UU9sI2xe5qZwaTQciTggpsDA&index=1&feature=plcp

mazilla
11-27-2012, 01:17 PM
I have a feeling that that picture was photoshopped. That looks like the standard metric version with the inner MPH ring phtoshopped over. If you look at my video below, I am running a real one of those clusters, with a device that I created which allows the speedometer to display in MPH on the outer ring (i.e. while being pulled by a Lamborghini you would see the needle make it to the 200 MPH mark) and also increment the odometer in Miles, rather than kilometers.

http://www.youtube.com/watch?v=KkUOgEvTYAY&list=UU9sI2xe5qZwaTQciTggpsDA&index=1&feature=plcp


This is super sweet...is it available? BTW, beautiful scenery there!

CTScott
11-27-2012, 01:20 PM
This is super sweet...is it available? BTW, beautiful scenery there!

It is available. I only made the one prototype so far, but can definitely make more as needed. The clusters are readily available on eBay, and I also have the capability now to reprogram the mileage on a used cluster to match your current cluster.

yazeed1989
11-28-2012, 04:05 AM
thanks CTScott


i think that , this speedometer has been photoshopped

ajmarshall169
11-28-2012, 10:47 AM
iif i get a cluster with the tach included, will it work perfect when my car right now only has the MPH gauge

CTScott
11-28-2012, 11:28 AM
iif i get a cluster with the tach included, will it work perfect when my car right now only has the MPH gauge

Yes. The one in my video has the tach and the car that I am running it on did not have one from the factory. The only thing that you have to make sure of it to match the "features" of your car (ABS, TRAC/VSC, etc), otherwise you will lose the indicator lights.

ajmarshall169
11-28-2012, 12:00 PM
I dont have ABS, or Trac, i just dont like just haveing the MPH gauge i want the tach also. so its all plug and play

CTScott
11-28-2012, 12:45 PM
I dont have ABS, or Trac, i just dont like just haveing the MPH gauge i want the tach also. so its all plug and play

Yes.

mazilla
11-28-2012, 11:04 PM
The only thing that you have to make sure of it to match the "features" of your car (ABS, TRAC/VSC, etc), otherwise you will lose the indicator lights.


I have cardboard behind my indicator lights... the ones that are never going to shut off anyways. :biggrin:

Golddeenoh
11-28-2012, 11:26 PM
I have cardboard behind my indicator lights... the ones that are never going to shut off anyways. :biggrin:

ROFL, Electrical tape is the norm for this kind logic :P

Dohsh77
06-06-2017, 02:19 AM
hello

i need this speedometer

http://www.toyota4arab.com/upload/i/00010/lvosjhf5ir76.jpg

thank you
Are you fond it
I serch for the same speedometer