Monstro
02-19-2013, 07:22 PM
Hey everyone,
Ive been planning a build for a while and I am not sure about one thing, I'm planning to use CP 11.5:1 pistons on a stock bore with 30K miles. Should i be getting standard 75.00mm or 75.50mm rings?
Supporting mods will be a Haltech Platinum, Jun 9.0 (256) cams, and hopefully a MI manifold. I already have DC headers, Tanabe touring, catless midpipe 2.0", Nst underdrive pulley, Quaife 1 way LSD and a CCI 8.6 flywheel and TRD clutch.
Any input i will appreciate =]
Ive been planning a build for a while and I am not sure about one thing, I'm planning to use CP 11.5:1 pistons on a stock bore with 30K miles. Should i be getting standard 75.00mm or 75.50mm rings?
Supporting mods will be a Haltech Platinum, Jun 9.0 (256) cams, and hopefully a MI manifold. I already have DC headers, Tanabe touring, catless midpipe 2.0", Nst underdrive pulley, Quaife 1 way LSD and a CCI 8.6 flywheel and TRD clutch.
Any input i will appreciate =]