View Full Version : airbag/passenger seat belt light(s)
matthewai
02-20-2013, 08:53 PM
hi guys i have a question is there any way to reset the airbag lights on the dash ? (red dash light & yellow "passenger airbag off") does it have to do with a tripped airbag sensor even though no airbags were deployed ? and also the passenger seat belt light flashes even when someone is sitting in the seat with the seat belt plugged in . can i do it with a scanner tool or is this a "bring to the shop" deal
CTScott
02-20-2013, 10:18 PM
Those lights flashing indicate that the passenger occupant classification system is not happy. check the grey and black connectors that plug into the little module mounted to the bottom of the front of the passenger seat.
matthewai
02-21-2013, 01:03 AM
okay ill report back here tom haha
matthewai
02-24-2013, 04:28 PM
damn no luck i unplugged them and the re plugged them . i doubt disconnecting the battery would do anything either
i might try the scanner with my buddy
CTScott
02-24-2013, 06:16 PM
Unplugging the battery won't help. Only a techstream or a vehicle specific scanner can read the codes. Try the jumper method...
matthewai
02-26-2013, 04:50 PM
i dont think i know that method haha
CTScott
02-26-2013, 04:57 PM
i dont think i know that method haha
http://www.yarisworld.com/forums/showthread.php?p=557473&posted=1#post557473
vBulletin® v3.8.11, Copyright ©2000-2025, vBulletin Solutions Inc.