Yaris Steering wheel Swap with Controls.

[A1phazu1u]

So I've been looking into swapping my steering wheel with one that has controls on it and i've recently picked up a 07 camry se wheel with audio and handsfree controls. Next step is to get a new clock spring that supports the extra wiring which is on the way.

What i need help with is finding the wiring that goes from the clock spring to the head unit. the rest of the wiring should be easy, i just can't seem to find that cable. If anyone can find one or a part number i would greatly appreciate it.

Pics of project soon, once i get the parts in. Thanks in Advance.

[CTScott]

The wiring from the clockspring to the headunit is part of the dash harness, so you would have to track down the entire dash harness of the vehicle you use the clockspring from. Or, you can just purchase the connector shells and buy the "repair terminals" to populate them. Toyota charges $12 to $20 per connector pin, but I stock them for a whole lot less, if you go that route.

[A1phazu1u]

The wiring from the clockspring to the headunit is part of the dash harness, so you would have to track down the entire dash harness of the vehicle you use the clockspring from. Or, you can just purchase the connector shells and buy the "repair terminals" to populate them. Toyota charges $12 to $20 per connector pin, but I stock them for a whole lot less, if you go that route.

I guess ill purchase them from you, ill contact you when I receive my clock spring. Thanks again Scott.