CoryM
04-09-2013, 10:12 PM
.... although admittedly a fair bit early :wink: Just got sick of driving on steel rims, and my new tires arrived.
Spent some time on the car yesterday: mounted the NT01s, serviced my brakes (caliper pins were getting stiff), maxed out my front camber (-2.8°), checked control arm bolts (still there, and still covered in grease), and mini-detailed the little piggy (pressure-washed underneath to get rid of salt, cleaned seats/interior, washed outside/jambs).
I hope the NT01s do better than I'm expecting in standing water though. I've run RA1s in pretty deep stuff with out hydroplaning, but the NT01s are definitely going to be worse.
Anyhow, no real point to this post :þ Car is otherwise stock except for TRD rear swaybar, a lap-belt (to hold my butt in the seat at autoX), shifter bushings, console and a stubby antenna.
Cheers.
Spent some time on the car yesterday: mounted the NT01s, serviced my brakes (caliper pins were getting stiff), maxed out my front camber (-2.8°), checked control arm bolts (still there, and still covered in grease), and mini-detailed the little piggy (pressure-washed underneath to get rid of salt, cleaned seats/interior, washed outside/jambs).
I hope the NT01s do better than I'm expecting in standing water though. I've run RA1s in pretty deep stuff with out hydroplaning, but the NT01s are definitely going to be worse.
Anyhow, no real point to this post :þ Car is otherwise stock except for TRD rear swaybar, a lap-belt (to hold my butt in the seat at autoX), shifter bushings, console and a stubby antenna.
Cheers.