PDA

View Full Version : New Here: I want to share my 12' SE


venezbras2013
04-29-2013, 03:12 PM
I think I'm in love with my Classic Silver Metallic Yaris SE.... it's been 4 months since I bought it and I love just staring at it, sitting on it, and driving it. To date, I haven't seen another SE model in the entire tri-county.... Miami-Broward-Palm Beach... I fell I have a unique car and I do get A LOT of stares....
Despite having such a small engine, it rides phenomenal at high speeds, easily 90-95mph, this small engine can take anything!

Future To Do List:
1) Intake... I'm about to order the AEM
2) Exhaust... no idea which one... any suggestions?
3) Perforated Rotors... any ideas?
4) lower it with Coilovers
5) 17'' OZ Superturismo GT in Black with red lettering
6) paint the brake calipers in red
7) 6,000K HID's

It looks awesome now, but it will look simply amazing if I'm able to afford all these upgrades....

YarisSedan
04-29-2013, 03:58 PM
Love the color choice especially the wheel and tire combo go well with your car. If I may suggest I would go with window tint would compliment your vehicle well. Maybe 20 percent in the rear and 50 percent in the front.

DJYojimbo
04-29-2013, 04:08 PM
i have a tanabe touring medalion axle back exhaust and it's sounds awesome! It doesn't really match the opening of our 2012 SE's bumper. I posted a picture awhile back. http://www.yarisworld.com/forums/showthread.php?t=44490 but i believe any aftermarket axleback exhaust will have this issue unless u have it custom made

etherdude
04-29-2013, 05:49 PM
Perhaps intead of coilovers as a first step, get the TRD rear sway bar instead. I put one on mine and it made a HUGE difference in handling. I found the added roll stiffness neautralized the handling. The car will take a "set" in corners without the rear "roll bounce" I was feeling prior to the sway bar. I can bomb on and off ramps like nobodies business now. And the ride is merely firm, not jarring. With New England potholes and winter driving, keeping the stock SE springs seemed like a good deal for me.

You already have stiffer shocks, springs, front sway bar, quicker steering, and better brakes than the L/LE models.

venezbras2013
04-29-2013, 06:33 PM
Thanks for the input. I might consider the rear sway bar altogether.
You think that for an extra lowered inch I can put the TRD coils on all 4 corners? Do you think that anything in terms of suspension that fits the 2nd gen Yaris fits on the 3rd gen Yaris?

venezbras2013
04-29-2013, 07:07 PM
YarisSedan:
I do have tints, they came installed from the dealership. Here's another pic.

B2FiNiTY
04-29-2013, 07:29 PM
looks great.

you've got some great plans.

b20vteg
04-30-2013, 01:11 AM
sexay~

yariseggvvti
04-30-2013, 02:14 AM
I think I'm in love with my Classic Silver Metallic Yaris SE.... it's been 4 months since I bought it and I love just staring at it, sitting on it, and driving it. To date, I haven't seen another SE model in the entire tri-county.... Miami-Broward-Palm Beach... I fell I have a unique car and I do get A LOT of stares....
Despite having such a small engine, it rides phenomenal at high speeds, easily 90-95mph, this small engine can take anything!

Future To Do List:
1) Intake... I'm about to order the AEM
2) Exhaust... no idea which one... any suggestions?
3) Perforated Rotors... any ideas?
4) lower it with Coilovers
5) 17'' OZ Superturismo GT in Black with red lettering
6) paint the brake calipers in red
7) 6,000K HID's

It looks awesome now, but it will look simply amazing if I'm able to afford all these upgrades....

Very nice ride!

Intake get a K&N drop in filter is good enough and take off lower tube. You will get that deeper sounds. Save money and more efficient.
Exhaust TRD axle back with custom 2 inch piping after resonator. Sounds really deep. DC 4-1 header will be nice too. More high end and VVTI kicks harder.
Cross drill rotors...I will keep the factory rotors and replace the rubber hose to stainless. I am still using factory brake pad and rotors with 76k miles.
Tein coil over with UR bars front and back, upper and lower.
Factory is good but OZ is better. If you don't want to keep the factory wheel, I don't might take it over.
Paint brake calipers looks good on 4 wheels disc brake.
6000k or 5000k head light and fog light.

venezbras2013
12-18-2013, 12:42 AM
SO FROM THIS LIST SOME MONTHS AGO:::::

To Do List:
1) Intake... I'm about to order the AEM , I HAVE NOT INSTALLED THIS YET
2) Exhaust... no idea which one... any suggestions? , TRD AXLE BACK ALREADY INSTALLED! :biggrin:
3) Perforated Rotors... any ideas? HAVEN'T FOUND ANY YET! :iono:
4) lower it with Coilovers , NOT GOING WITH COILOVERS, I'M JUST DOING TRD LOWERING SPRINGS, ON THE WAY :clap:
5) 17'' OZ Superturismo GT in Black with red lettering , DID NOT GO WITH THE OZ's, ON THE OTHER HAND I GRABBED THESE ENKEI GTC01 ON EBAY THE OTHER DAY!!! I THINK IT WILL LOOK VERY GOOD! THESE ARE 17X7 +38 OFFSET, THINKING ON DOING 205/40'S
6) paint the brake calipers in red , I THINK i'LL KEEP THEM SILVER
7) 6,000K HID's , I WENT WITH 5,000K HID JUST ON THE HEADLIGHTS, IT LOOKS NICE

EXTRAS
8) INSTALLED A TRD REAR SWAY BAR
9) TRD MINI ANTENNA
10) FRONT SWAY BAR, NOT YET!
11) CHANGE THE STEREO AND ALL SPEAKERS, NOT DONE YET

manakorin
12-22-2013, 12:48 AM
Sweet ride. Definitely worth falling in love with.

yarisgeo13
12-22-2013, 10:07 PM
Nice ride Venebra! I own the '13 Yaris LE version! I live in Ft. Lauderdale myself! I was looking at the SE version but my dealer didn't have one in stock at the time. I was at the Miami Car show and Toyota couldn't get the SE model in time to show at the Miami New Car show a couple of month's ago!

venezbras2013
12-26-2013, 07:26 PM
Thanks yarisgeo13! I had to special order my SE model (waited patiently for 6 weeks) and the dealer brought it from North Carolina! in my opinion all south florida dealers are making a dumb decision not to request and have the SE in stock! they would fly off the lot. It is a great little car.

venezbras2013
03-24-2014, 12:25 AM
The outcome is quite amazing!!!! will be posting more pics soon, but please enjoy.:clap:
Another pic, amazing what lowering springs, 17's and 205/40's can do!!!!!!

kimona
03-24-2014, 12:53 AM
Those wheels look great!

bentjazz
03-24-2014, 10:13 AM
Love your color. My 2010 Yaris is black. Never again.
Here's to many years in your Yaris.....

nookandcrannycar
03-25-2014, 12:02 AM
black. Never again.

I have to agree. In addition to the outside, try a black car with no A/C :eek: (90k + miles for me (from new) in a Colt (Mirage)).

Septembersrain
03-28-2014, 06:32 AM
Mine is black too. My only issue are these micro scratches. I have touch up paint and clear coat for it.

I still love looking at her though, she's beautiful.

»Sent from a larger than life device. Using Tapatalk«

TPA5
03-28-2014, 10:32 PM
Fantastic! Those wheels are sex. Makes me wish I could do that to my silver '12


Sent from my iPhone using Tapatalk

Kal-El
03-29-2014, 08:13 PM
Excellent! :thumbsup:

I wish more SE's were sold. Rarely do I see one.

YodaBird
03-31-2014, 08:34 PM
Nice, I left my passenger car mat at a car wash on the weekend :( I hope Toyota gives me another one !