jm350
05-25-2013, 05:48 PM
Hi everyone !! :smile:
You knew me with this car....
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/225159_183672938351804_1799671_n.jpg
Now i have this....
Scion IQ 2012. :cool:
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/543761_541512919234469_1195534937_n.jpg
And i have this project...
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/21128_549223668463394_939121382_n.jpg
So, i bought 2 rolls of carbone fiber wrap vinyl...
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/428632_549223811796713_756950542_n.jpg
And i started my project....
Phase 1 (the hood) of the carbone fiber project is now completed successful !!!
First step, clean the hood and pull out the top moulding clips for a better finish.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/264464_552273651491729_1204453059_n.jpg
Step 2, put some reference points for cutting the extra vinyl i don't need.
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/548384_552273731491721_1842179332_n.jpg
Step 3, just check if everythings is ok before starting the installation.
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/945784_552273961491698_1450469512_n.jpg
Step 4, ........the final result !!!
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/943783_552274591491635_2100928758_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc3/970531_552274631491631_1994337964_n.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-snc6/184560_552274681491626_1682554383_n.jpg
Phase two....
I made the eye lids for the headlamps, following the patern of the hood.
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/181198_552793721439722_810329253_n.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc3/969064_552793798106381_421560163_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash4/405676_552793851439709_851049309_n.jpg
And i tinted the rear/back windows with 5% limo film...
(At the moment when i take the picture, the back glass was not done. Only both sides).
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-frc1/263382_552793884773039_1780751812_n.jpg
phase 3.....
I completed those body sections between the doors and the rear windows.
Because of the rain starting, i couldn't do the doors pillars, i'll do it next time.
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/559625_553150598070701_309151344_n.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/946934_553150744737353_1751098261_n.jpg
http://pages.videotron.com/jm350/IMAG1160.jpg
phase 4....
The hatch !!
First i have to takeout everything (handle, wiper, dealer sticker, name plates), and clean it perfectly.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/942599_553675121351582_1775198148_n.jpg
And put the CF....
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc3/972204_553675181351576_485931847_n.jpg
And put back almost everything, and it's done !!
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/248092_553675278018233_1932810719_n.jpg
I had extra time before the rain comes (again), so i put some chrome lines on the front grills.
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/166046_553675418018219_657160524_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn2/971715_553675474684880_975204959_n.jpg
Next weekend i will continue the project and new pictures will follow !!
:cool::biggrin:
You knew me with this car....
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/225159_183672938351804_1799671_n.jpg
Now i have this....
Scion IQ 2012. :cool:
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/543761_541512919234469_1195534937_n.jpg
And i have this project...
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn1/21128_549223668463394_939121382_n.jpg
So, i bought 2 rolls of carbone fiber wrap vinyl...
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/428632_549223811796713_756950542_n.jpg
And i started my project....
Phase 1 (the hood) of the carbone fiber project is now completed successful !!!
First step, clean the hood and pull out the top moulding clips for a better finish.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-prn2/264464_552273651491729_1204453059_n.jpg
Step 2, put some reference points for cutting the extra vinyl i don't need.
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash3/548384_552273731491721_1842179332_n.jpg
Step 3, just check if everythings is ok before starting the installation.
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/945784_552273961491698_1450469512_n.jpg
Step 4, ........the final result !!!
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-ash3/943783_552274591491635_2100928758_n.jpg
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-frc3/970531_552274631491631_1994337964_n.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-snc6/184560_552274681491626_1682554383_n.jpg
Phase two....
I made the eye lids for the headlamps, following the patern of the hood.
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-ash4/181198_552793721439722_810329253_n.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-frc3/969064_552793798106381_421560163_n.jpg
https://fbcdn-sphotos-a-a.akamaihd.net/hphotos-ak-ash4/405676_552793851439709_851049309_n.jpg
And i tinted the rear/back windows with 5% limo film...
(At the moment when i take the picture, the back glass was not done. Only both sides).
https://fbcdn-sphotos-e-a.akamaihd.net/hphotos-ak-frc1/263382_552793884773039_1780751812_n.jpg
phase 3.....
I completed those body sections between the doors and the rear windows.
Because of the rain starting, i couldn't do the doors pillars, i'll do it next time.
https://fbcdn-sphotos-f-a.akamaihd.net/hphotos-ak-ash3/559625_553150598070701_309151344_n.jpg
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-prn1/946934_553150744737353_1751098261_n.jpg
http://pages.videotron.com/jm350/IMAG1160.jpg
phase 4....
The hatch !!
First i have to takeout everything (handle, wiper, dealer sticker, name plates), and clean it perfectly.
https://fbcdn-sphotos-g-a.akamaihd.net/hphotos-ak-ash3/942599_553675121351582_1775198148_n.jpg
And put the CF....
https://fbcdn-sphotos-d-a.akamaihd.net/hphotos-ak-frc3/972204_553675181351576_485931847_n.jpg
And put back almost everything, and it's done !!
https://fbcdn-sphotos-h-a.akamaihd.net/hphotos-ak-ash4/248092_553675278018233_1932810719_n.jpg
I had extra time before the rain comes (again), so i put some chrome lines on the front grills.
https://fbcdn-sphotos-b-a.akamaihd.net/hphotos-ak-prn2/166046_553675418018219_657160524_n.jpg
https://fbcdn-sphotos-c-a.akamaihd.net/hphotos-ak-prn2/971715_553675474684880_975204959_n.jpg
Next weekend i will continue the project and new pictures will follow !!
:cool::biggrin: