What do I need to make my navigation unit fit in my 2008 Yaris sedan?

[Cxltxn]

I'm relatively new here and a complete noob when it comes to anything to do with cars. I purchased a KW-NT300 JVC navigation unit and I have installed it and its working completely fine.

Only thing is that it doesn't fit properly where the factory deck was. This (http://www.crutchfield.com/p_120958202/Metra-95-8202-In-dash-Receiver-Kit.html?tp=3121#customer-reviews-tab) part says that it should be compatible but I've already ordered a similar part off eBay and it didn't work.

Height wise everything is fine, the unit is 4 inches and the hole is 4 inches but the width of the unit is about 6 3/4 inches whereas the width of the hole is about 8 inches.

I've done a search on here but I've been unable to find this information I'm looking for. I just want to know what I need to make this thing fit. It's possible that I'm not using the right terminology when I'm searching but like I said, I'm a complete noob when it comes to this.

I've attached a picture below:

http://i1186.photobucket.com/albums/z371/Cxltxn/Photo2013-01-1080713PM_zpsc04291bb.jpg

Thanks in advance for any help!

[jcboy]

you need what we call here as 'spacers' but what is called on the web a part of the 'trim dash kit'.

it looks like the one below and when installed should look like the ones on the side of the stereo on 2nd pic.

http://www.carid.com/ic/metra/stereo-dash-kit/95-8202_1.jpg

http://i71.photobucket.com/albums/i154/Derek2M6/Echo/DSC00191.jpg

[Cxltxn]

you need what we call here as 'spacers' but what is called on the web a part of the 'trim dash kit'.

it looks like the one below and when installed should look like the ones on the side of the stereo on 2nd pic.

http://www.carid.com/ic/metra/stereo-dash-kit/95-8202_1.jpg

http://i71.photobucket.com/albums/i154/Derek2M6/Echo/DSC00191.jpg

Thanks for the response! I actually purchased a set of these but they didn't fit properly. Is there any way I can be assured that I'm purchasing ones that will fit or is it just a hit or miss kind of thing?

[BT91]

The part you are looking for is the Metra 95-8202, which is the correct part from the crutchfield link you posted. I had the metra pieces installed on my old single din unit but, I sold them with the unit when I swapped out to the Kenwood DPX-500BT
This part works for yaris and many other toyota and scion models.
Heres the link as well. http://www.metraonline.com/part/95-8202
This will make that unit look alot better.
Cheers

[Kar98]

I've got a pair of the metra trims gathering dust here if you want them.

[screenprintr]

The latter pictures look much better than the first.

Sure the OP's upgrade will look great soon. I was just taking about this with my Daughter.

[Cxltxn]

Thanks for the help guys! Ordered the Metra 95-8202. Excited to see the results!