PDA

View Full Version : Biggest spacers?


TickleTimeTim
06-05-2013, 02:58 PM
What's the biggest spacers you can throw on the yaris with only adding spacers? If you wanted more than just a few mm, what would be the route from there?

CTScott
06-05-2013, 03:04 PM
That will depend on what you are running for tires and rims. With stock sized tires and rims, 10mm would be about the limit for the fronts.

TickleTimeTim
06-05-2013, 04:11 PM
So I take the backs have a little more play? Yeah, on stocks currently.

CTScott
06-05-2013, 04:39 PM
So I take the backs have a little more play? Yeah, on stocks currently.

Correct - The rear wheels are set in more than the fronts. Also, since the rears don't turn, that also helps.

cali yaris
06-05-2013, 05:02 PM
13mm hub spacer kit works well. You can use anything from 5mm-30mm, but you'd need a reason to do so.

Kaotic Lazagna
06-05-2013, 06:35 PM
I also wouldn't use anything thicker than 5 or 7mm wheel spacers unless you install some extended lug studs, otherwise, you'll only catch 3-5 threads.

TickleTimeTim
06-05-2013, 07:10 PM
So it's worthless on stocks. I might as well wait for wider wheels then get spacers? Well I ordered my lip kit today and next is a good from Garm, wheels and spacers will have to wait til after that.

TickleTimeTim
06-05-2013, 07:11 PM
Hood* from Garm. Autocorrect hates the word hood

TickleTimeTim
06-06-2013, 11:18 PM
These bad boys are $100 but located 4 hours from where I live. They don't include tires. 4x100 14"

Kaotic Lazagna
06-07-2013, 12:19 AM
What are the specs, such as width, offset, and center bore?

TickleTimeTim
06-07-2013, 12:38 AM
He just sold them. He didn't have it listed and sold before I could ask

TickleTimeTim
06-22-2013, 02:45 PM
Has anyone here ever done the 2" (50mm) spacers with the studs? I'm interested to see how much that would look like a go cart

G-Ammo
06-22-2013, 03:52 PM
I had 30mm in the back.. but then I had 16x6j original toyota rims... the wheel just poked out. Also... it rubbed alot when i had people in the back, hahah... serious rubbing!!! still a cool sight though!

I now have 15x7 (ET25) and i want to do 15mm/20mm spacers in a few months...

TickleTimeTim
06-22-2013, 04:09 PM
I was thinking at least an inch width if I was to do it with the stock 15" rims. Do you have any pictures of how it looked?

1.5
06-23-2013, 09:28 AM
1" currently. But I have a lot of fender work done

TickleTimeTim
06-23-2013, 11:48 AM
Notice any extra wear on your tires?

d3310n
07-01-2013, 12:57 PM
how big could i go with 17x205?

1.5
07-01-2013, 01:21 PM
Notice any extra wear on your tires?

you mean on the contact patch or sidewall?

contact patch: yes because im running -~6 camber

sidewall: depends on the wheel/tire size

the spacer alone wont cause any wear

cali yaris
07-01-2013, 01:21 PM
So it's worthless on stocks. I might as well wait for wider wheels then get spacers?

Not correct. Widening your track will improve handling, even on stock wheels.

cali yaris
07-01-2013, 01:22 PM
how big could i go with 17x205?

"17" is a wheel size, "205" is a tire size. Not enough information.

Wheels: diameter x width x offset
Tires: width x height x wheel size (diameter)