For Sale: Every single part off an 07 MT Liftback

[CTScott]

Note - Almost everything in this thread was sold. The only parts I have left are in this thread: http://www.yarisworld.com/forums/showthread.php?t=52478



I recently purchased another Crashy with the hopes of repairing it and putting it back on the road for a buddy of mine. My frame guy squashed that hope yesterday, so I will be completely parting her out.

It is probably easier for me to list what is not usable or available, rather than listing everything that is. I am willing to ship just about anything just about anywhere.

When I mentioned acquiring her on Facebook, 2007tRD mentioned an interest in doing a MT conversion on his AT Yaris, but his wife doesn't drive stick, so he decided not to. This would be a great opportunity though if someone would like to do that, as I could package (and document) everything associated with doing the conversion.


Here's a video of her running up on my lift: http://www.youtube.com/watch?v=l-fQKSIJayk

Here are a couple of pics (let me know if you would like to see pics of specific parts):
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/OnLift_zps426eeaea.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/OnLift_zps426eeaea.jpg.html)

http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/OnLift-Rear_zps423200cf.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/OnLift-Rear_zps423200cf.jpg.html)

Details:

2007 Yaris Liftback - White

Engine: A little over 100K miles on the Engine, which runs great and seems to have been well maintained.

Transmission: 5 Speed Manual. Shift smoothly and seems well maintained as well.

Body - This car is pristine (other than what go smashed). From the doors back she looks like new. The hatch is perfect, with not a singe scratch, and the rear bumper is in very good condition as well. The front bumper is damaged, but the grills and Toyota emblem are good.

AC System - System was still fully pressurized and working. Condenser and all piping are fine. Compressor works fine, but has some chips out of the edges of the plastic pulley. I ran it for about an hour and they did not seem to cause any issues.

Brakes - (Non-ABS) All brake parts are good. The rotors, calipers and pads have no wear and appear to have been very recently replaced.

Wheels - 3 of the four stock steelies are in good condition. 3 of the four hubcaps are decent.

Interior - The door panels, side panels, and headliner are all excellent. The carpet looks very good, except for a wear through point by the clutch pedal. The Radio and AC control panels were covered in neffy wrap. The dash is in very good shape and the passenger airbag is not popped. Driver's airbag popped.

Seats - The front and rear (bench) seats are perfect, with no fading.

Features - Base model (no power windows), but door locks have been upgraded with aftermarket actuators. Manual mirrors are in very good condition.

Still For Sale (at least the things that I can specifically think of) Prices do not include shipping:

1. Front brakes (calipers only left, like new): $50
2. Rear brakes: $50
3. Gas tank: $50
4a. Fuel Pump: $60
4b. Fuel level float with sensor: $25
5. Dash top with passenger airbag: $150
6. Steel Wheel (1 available): $25 each

8. Rear Seat (bench): $100
9. Front Seats: $75 each
10. Brake booster (non-abs): $25

14. White Hatch assembly with rear wiper: $225
18. AC Compressor (without pulley): $125
19. Alternator: $60
20. Rear Bumper: $150
21. Whiteline Adjustable Rear Sway Bar (in like-new condition): $175
22. AFE Cold Air Intake: $140
24. OEM muffler: $25
25. OEM Mid Pipe: $100
26. Left rear fender liner: $15
27. Right rear fender liner: $15
28. Left front drive axle: $40
29. OEM Springs (x4): $40
30. Headliner: $200
31. AT to MT conversion kit (includes documentation and everything needed except the gearbox): $1000
32. Non-ABS power steering ECU: $65
33. Steering column w/PS Motor: $100




OEM Hatch Struts: $40 for both:
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/HatchStruts_zpsdfd49a99.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/HatchStruts_zpsdfd49a99.jpg.html)

Firewall blanket - Inside: $25
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/Firewallblanket-Inside_zps09fcb047.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/Firewallblanket-Inside_zps09fcb047.jpg.html)

Firewall blanket - Under hood: $25
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/Firewallblanket-hood_zpsa6f229cd.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/Firewallblanket-hood_zpsa6f229cd.jpg.html)

Front knuckles - Non ABS: $40 each
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/Knuckles-Outside_zpsf2640000.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/Knuckles-Outside_zpsf2640000.jpg.html)

http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/knuckles-Inside_zps15b29e2d.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/knuckles-Inside_zps15b29e2d.jpg.html)

Alternator: $60
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/alternator_zps27fa48a4.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/alternator_zps27fa48a4.jpg.html)

AC Blower assembly: $40
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/ACBlower-Bottom_zps5972b22e.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/ACBlower-Bottom_zps5972b22e.jpg.html)

Dome light: $10
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/DomeLight_zps9ab383cc.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/DomeLight_zps9ab383cc.jpg.html)

Rear bumper impact foam: $30
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/RearBumperFoam_zpsc9c66307.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/RearBumperFoam_zpsc9c66307.jpg.html)

Center vent assembly: $10
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/ACCenterVent_zpsdb9c875c.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/ACCenterVent_zpsdb9c875c.jpg.html)

Rear speakers with mounting rings: $20
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/RearSpeakers_zpsdfe5aaca.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/RearSpeakers_zpsdfe5aaca.jpg.html)

Center Console: $25
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/CenterConsole_zps7b46f99a.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/CenterConsole_zps7b46f99a.jpg.html)

Roof gutter trim strips: $15 set
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/Roofguttertrim_zpsf78cde71.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/Roofguttertrim_zpsf78cde71.jpg.html)

Kick panels: $15 set
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/kickpanels_zps88f51a2c.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/kickpanels_zps88f51a2c.jpg.html)

Manifold Heath Shield: $20
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/ManifoldShield_zps9655eb2e.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/ManifoldShield_zps9655eb2e.jpg.html)

OEM Springs: $40 all
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/Springs_zpsf6b80010.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/Springs_zpsf6b80010.jpg.html)

OEM rear shocks: $25 set
http://i372.photobucket.com/albums/oo163/ctscott329/Crashy3/RearShocks_zps0d90ccc2.jpg (http://s372.photobucket.com/user/ctscott329/media/Crashy3/RearShocks_zps0d90ccc2.jpg.html)



-

[enviri]

i need the entire center console area! lol i also have other people that needs stuff..like a door..i'll give em a call

[tk-421]

http://proxy12.media.online.ua/uol/r3-6206246e79/4fe502cc17f20.jpg

[mazilla]

I know this is random, and the engine cover is not avail., but what about the engine cover nuts? The little acorn-style nuts that hold the engine cover down...I lost mine a while back and could use another set.


Yes yes...I lost my nuts. ;)

[racerb]

I know your guy said it is beyond repair, but would it not be suitable for a racecar chassis? If so, how much for the whole car??

racerb :confused:

[Ryze268]

I would like all the bits for a manual conversion except the gearbox, you know.. clutch pedal, shift assembly, etc.

i am very serious about making a purchase

[CTScott]

I know your guy said it is beyond repair, but would it not be suitable for a racecar chassis? If so, how much for the whole car??

racerb :confused:

It would definitely be. It actually would have been a reasonable (~$2000) frame fix for a streetable car, except adding that to what I paid for the car, plus the crazy cost shipping for a non-running (before it got to me) car, I just couldn't justify spending that much, as my buddy had a very limited budget.

At this point it is looking like I have enough interest in pieces and parts that it just wouldn't make sense for me to sell the whole car.

The car actually has a clear title and a squeaky clean carfax, so the carcass with the VIN tags still attached probably has some value.

[tk-421]

I would like all the bits for a manual conversion except the gearbox, you know.. clutch pedal, shift assembly, etc.

That's funny because I actually want the gearbox since apparently one of my synchros is dying... I'm also interested in part 84306-22010, which is the spiral cable for the airbag, but I'm not sure if that's part of the airbag assy that's either pending sale or unusable... Finally, I'll take the neffy panels and ac controls unless somebody already asked for them. LMK! :thumbsup:

[CTScott]

I would like all the bits for a manual conversion except the gearbox, you know.. clutch pedal, shift assembly, etc.

i am very serious about making a purchase

PM me and we'll figure it out. I would love to see someone do this, just because it has been talked about a million times and no one has even done it.

[CTScott]

I know this is random, and the engine cover is not avail., but what about the engine cover nuts? The little acorn-style nuts that hold the engine cover down...I lost mine a while back and could use another set.


Yes yes...I lost my nuts. ;)

Check you wife's pocketbook. I know that where mine keeps mine...

If the gentleman taking the cover doesn't need them they are yours. By the way, I finally tracked down a Canadian tach cluster to do a conversion and color change for you...

[CTScott]

That's funny because I actually want the gearbox since apparently one of my synchros is dying... I'm also interested in part 84306-22010, which is the spiral cable for the airbag, but I'm not sure if that's part of the airbag assy that's either pending sale or unusable... Finally, I'll take the neffy panels and ac controls unless somebody already asked for them. LMK! :thumbsup:

Hmm, wondering about the value in shipping a tranny from CT to Mexico, but we can definitely scope it out. The spiral cable is actually there and OK. I peeled the neffy off the radio surround, to see how it was modified (the original owner trimmed the plastic a bit at the top and bottom of the surround, probably to allow his radio to still fit with the thickness of the neffy. The AC controls are still intact with the neffy.

[tk-421]

BTW, is the black plastic part between the windshield and the hood salvageable? If so, I'm interested in that as well. Thanks!

Check you wife's pocketbook. I know that where mine keeps mine...
:laughabove:

[CTScott]

BTW, is the black plastic part between the windshield and the hood salvageable? If so, I'm interested in that as well. Thanks!


:laughabove:

The wiper cowling - The right side piece is pretty crunched, but the right side piece (with the pop-out for the battery) is fine.

[tk-421]

Hmm, wondering about the value in shipping a tranny from CT to Mexico, but we can definitely scope it out. The spiral cable is actually there and OK. I peeled the neffy off the radio surround, to see how it was modified (the original owner trimmed the plastic a bit at the top and bottom of the surround, probably to allow his radio to still fit with the thickness of the neffy. The AC controls are still intact with the neffy.

You'd be surprised regarding the tranny... It's really difficult to get used parts around here. I have no idea where they take the parts since I've been asking around, but no one is talking at the dealer. I wonder why... :rolleyes:

As for the AC panels, I'm considering modifying it a bit to fit a 7" tablet that I can add/remove, so it would be better to do it on a spare kit. I don't really mind the neffy being peeled off too much since I have some spare fabric in my garage. Also one of my AC controls sunk to the inside of the AC panel and I'm not sure if it's usable anymore, so... I might go for them just in case.

I'll get back to you about the cowling, since I need to make sure about exactly which part I need. :biggrin:

[CTScott]

You'd be surprised regarding the tranny... It's really difficult to get used parts around here. I have no idea where they take the parts since I've been asking around, but no one is talking at the dealer. I wonder why... :rolleyes:

As for the AC panels, I'm considering modifying it a bit to fit a 7" tablet that I can add/remove, so it would be better to do it on a spare kit. I don't really mind the neffy being peeled off too much since I have some spare fabric in my garage. Also one of my AC controls sunk to the inside of the AC panel and I'm not sure if it's usable anymore, so... I might go for them just in case.

I'll get back to you about the cowling, since I need to make sure about exactly which part I need. :biggrin:

I think they melted all the used Yaris parts down there to make my Tacoma.

[fnkngrv]

I might be interested in resurrecting my A/C. Let me know what you would run me to "buy back" the parts that I sold you...lol.

[CTScott]

I might be interested in resurrecting my A/C. Let me know what you would run me to "buy back" the parts that I sold you...lol.

You still have your compressor right? If so, you just need the lines and the condenser, if I remember correctly.

[dumbo0]

I want the white panels on the inside.. Like the pillars, and the one by the door.. Hehe

[fnkngrv]

You still have your compressor right? If so, you just need the lines and the condenser, if I remember correctly.

yup.

[CTScott]

yup.

Sounds like a plan. I will shoot you an email.

[3cyltrbo]

AC Stuff if not already spoken for (please)
(lines / condenser etc...) (I already have an interior switch but I could take that also if you wanted to clear out all AC stuff at once)



Also the left and right Kickpanels (plastic panels down by your feet)
And the left and right sill panels (plastic panels that join the kickpanels)
????$$$$$$?????????


maybe the back seat (pending some pictures of fabric style and condition)
(assuming the seat, I would just drive from Ottawa to your place to pick it up if that was alright)
???????$$$$$??????????

A-Pillar trim panels (the interior plastic pieces) IF this car has side airbags (if NOT side airbags equipped = can't use the trim pieces)

Cheers

Will

[ilikerice]

Hey scott, I need the this part in front of the PASSENGER side mirror. My clips are broken so it kinda rattles in the wind sometimes. How much to Savannah, GA 31419?

[Astroman]

Scott, I'm in need of the fresh air/recirculating air assembly. A shop put some stuff in backwards years ago and it broke the cover on the bottom left (the c or half clam shell part) that actually diverts the fresh and recirculating air. Also when it did this it messed the cable up. Switch is fine. I really need it.

I'm also curious if I could get a price on the manual trans conversion parts (been wanting to do that since I bought the auto), and the right interior door panel (I broke my speaker cover on the door), zip 98802.

[contraband831]

Do you happen to have the complete strut mounts (bearings, rubber etc..), if so how much shipped to 93635?

also side marker lights?

[mazilla]

Check you wife's pocketbook. I know that where mine keeps mine...

If the gentleman taking the cover doesn't need them they are yours. By the way, I finally tracked down a Canadian tach cluster to do a conversion and color change for you...


Hahaha!


Thank you on both counts! At your leisure on the tach, I know you have your hands full with this part out at the moment. I'll figure out what color I want and I'll get into my records for my exact mileage so we can adjust my ODO to the proper reading too. I have a paper file that logs every mile I've ever driven(and been reimbursed on) for work...the downside is my son spread the entire thing(about 7 years worth) around the kitchen a while back when I left the folder out. It's a cluster F at the moment. :laugh:

[CTScott]

AC Stuff if not already spoken for (please)
(lines / condenser etc...) (I already have an interior switch but I could take that also if you wanted to clear out all AC stuff at once)



Also the left and right Kickpanels (plastic panels down by your feet)
And the left and right sill panels (plastic panels that join the kickpanels)
????$$$$$$?????????


maybe the back seat (pending some pictures of fabric style and condition)
(assuming the seat, I would just drive from Ottawa to your place to pick it up if that was alright)
???????$$$$$??????????

A-Pillar trim panels (the interior plastic pieces) IF this car has side airbags (if NOT side airbags equipped = can't use the trim pieces)

Cheers

Will

AC stuff is spoken for.

The rear seat is the blue dot fabric type and is in excellent condition (no stains or holes).

51528

The kick panels and sills are still available.

I would do $100 for the rear seat and $40 for the sills and kicks.

A pillars are spoken for, but they are non-airbag anyhow.

[CTScott]

Hey scott, I need the this part in front of the PASSENGER side mirror. My clips are broken so it kinda rattles in the wind sometimes. How much to Savannah, GA 31419?

The passenger side one was gone. The driver side one is there, but two of the clips snapped when I was removing it. For yours, either use some 3M double sided tape or 3M emblem and molding adhesive (comes in a tube). My red one (Crashy #2) had broken clips and I used the 3M adhesive.

[D&D]

Hey Scott,

I realize this is a tiny request, but I need one of the bolt covers that cover the front wiper bolt. See here for exact piece and part #: http://www.midatlantictoyotaparts.com/oem-part/toyota/yaris-parts/2011/base/1-5l-l4-gas/body-hardware/wiper-and-washer-components/wiper-arm-cover-left/85292-13010

Just let me know what you think is a fair price and I can PayPal you immediately.

Thanks! :)

[CTScott]

Scott, I'm in need of the fresh air/recirculating air assembly. A shop put some stuff in backwards years ago and it broke the cover on the bottom left (the c or half clam shell part) that actually diverts the fresh and recirculating air. Also when it did this it messed the cable up. Switch is fine. I really need it.

I'm also curious if I could get a price on the manual trans conversion parts (been wanting to do that since I bought the auto), and the right interior door panel (I broke my speaker cover on the door), zip 98802.

So, you need the whole "bread box" assembly - That is definitely doable. Let me pull it and get a weight and I'll shoot you a quote.

Ryze268 beat you to asking about the MT conversion kit. If he doesn't bite, you are next in line.

The interior door panels (and possibly entire doors) are sale pending.

[CTScott]

Do you happen to have the complete strut mounts (bearings, rubber etc..), if so how much shipped to 93635?

also side marker lights?

Yes on the strut mounts. Let me pull them and get a weight. The left side marker light is good. the right side lost the clear cover.

[CTScott]

Hey Scott,

I realize this is a tiny request, but I need one of the bolt covers that cover the front wiper bolt. See here for exact piece and part #: http://www.midatlantictoyotaparts.com/oem-part/toyota/yaris-parts/2011/base/1-5l-l4-gas/body-hardware/wiper-and-washer-components/wiper-arm-cover-left/85292-13010

Just let me know what you think is a fair price and I can PayPal you immediately.

Thanks! :)

I'd prefer to sell those covers along with the wiper arm.

[D&D]

I'd prefer to sell those covers along with the wiper arm.

Ahh, OK.

[Ryze268]

PM sent =]

[ilikerice]

The passenger side one was gone. The driver side one is there, but two of the clips snapped when I was removing it. For yours, either use some 3M double sided tape or 3M emblem and molding adhesive (comes in a tube). My red one (Crashy #2) had broken clips and I used the 3M adhesive.

common issue I assume then. Thanks for the tip. Will do that later

[gambit]

I'm interested in the door lock cables

[cali yaris]

I realize this is a tiny request, but I need one of the bolt covers that cover the front wiper bolt.

It's a $4 part? Maybe just order one? <<Sale Price: $4.07>>

[Astroman]

Thanks Scott! It's been annoying having to manually change it as I had to keep my glovebox off. Keep me in mind for the other stuff too.

[ZAKU]

How are the wiper arms? The paint on mine is flaking off and the metal undernath looks pitted :(

[TickleTimeTim]

How about driver seat belt (mine has a bad rip) and the black plastic cover that goes over the screw of the rear windshield wiper?

[TickleTimeTim]

Heck, price that with and without the right rear quarter panel to 72103

[CTScott]

How are the wiper arms? The paint on mine is flaking off and the metal undernath looks pitted :(

Wiper arms on this one are very good. Considering that there is not a speck of rust on the under carriage or exhaust, I don't think this car ever saw rain.

[CTScott]

How about driver seat belt (mine has a bad rip) and the black plastic cover that goes over the screw of the rear windshield wiper?

I'd prefer to sell the hatch whole, as it is absolutely mint. If it was red, it would already be swapped onto Crashy 2. The rear quarter panel is sold already too.

The driver's seat belt is good, but the pretensioner would have popped with the airbag, so you would want the strapping portion, but not the pretensioner. I could do $15 for it, most of which would be the shipping cost because of the weight.

[TickleTimeTim]

The strap is all I need if it is possible to transfer it.

[CTScott]

The strap is all I need if it is possible to transfer it.

It looks like it would be a bit of work to transfer it. I just pulled the driver's belt and It turns out though that the driver must not have been wearing it, as the pretensioner is not popped.

That makes it easy to install, but unfortunately though that makes it a whole lot more valuable. You'd be looking at $60 shipped for the good one.

[Shinare]

Has the cabin air filter cover been spoken for? Mine was broken off when I bought the car.

Also, and its a big request... how much would it be for every plastic interior piece from the doors back (dont need the doors, but need everything back, including the hatch area and hatch).

That might be a hefty shipment to Oklahoma City, so its probably out of the question but my used 09 has MANY MANY terrible dog scratches in every plastic panel from the front doors back (the actual doors are pretty good). Realistically its probably more cost and trouble than its worth to try and make it all look better, but I thought I would ask anyway. :)

[Shinare]

Also is that an after market air filter? Is that pricy? Worth having?

[Altitude]

It's really difficult to get used parts around here. I have no idea where they take the parts since I've been asking around, but no one is talking at the dealer.

You should probably try Tatooine.

[dumbo0]

How about the door panels? The white plastic trim.. I want those..

[CTScott]

Also is that an after market air filter? Is that pricy? Worth having?

The interior plastics are already sold. The car's OEM air filter was damaged, so to run it I threw my spare AFE intake on it to start it up. I would be willing to sell it for $140 shipped.

[CTScott]

How about the door panels? The white plastic trim.. I want those..

Door panels are sold. Which white plastic trim pieces are you looking for?

[dumbo0]

The white plastic trims, uhhm the arm rest.. Hehe

[CTScott]

The white plastic trims, uhhm the arm rest.. Hehe

Ah, I would call that light grey. That was sold with the doors.

[tk-421]

You should probably try Tatooine.

I hate dealing with that rebel scum. They just can't let bygones be bygones... :thumbdown:

[Gweeven]

is the rear seat 1 piece or 60/40?

[ezhacker1]

It's 1 piece.

[mehullica]

How much for the engine?

[CTScott]

How much for the engine?

The engine is sold.

[Gearheadb6]

Hey CTscott! Are any of the rear interior plastics still available? I need the plastic piece right above the tail light vent... Basically where the miracle X-brace from micro image would bolt. (Uses the upper rear seat belt mounts) so i guess i need the plastic the L/R rear seat belt comes out of :)

[Gearheadb6]

Ha! Just read the whole post all the way through... Jumped the gun a bit :) its sold

[ezhacker1]

haha, i wanted the same piece, the C pillar, for my Xbrace

[CTScott]

I updated the first page with some additional parts. If anyone wants to see parts of particular items, just let me know.

[kou]

I need the top cover for the steering column and the plastic cover in front of the instrument cluster.

[CTScott]

I need the top cover for the steering column and the plastic cover in front of the instrument cluster.

PM sent

[Astroman]

PM me when you get the part I requested removed. :smile: No hurry, but I do want it.

[CTScott]

PM me when you get the part I requested removed. :smile: No hurry, but I do want it.

I removed the dash yesterday, so the AC system will be coming out today.

[CTScott]

Added more parts for sale, including an AFE cold air intake and a Whiteline Adjustable Sway Bar.

[solarVitz]

Hi Scott, are the 2 rear interior panels that cover the rear strut and hold the cargo plate still available? if so i would buy them from you.

Thanks,
Noel

[CTScott]

Hi Scott, are the 2 rear interior panels that cover the rear strut and hold the cargo plate still available? if so i would buy them from you.

Thanks,
Noel

Those are popular requests. Unfortunately all of the rear interior plastics are sold.

[dmfang]

are the breaks oem or aftermarket replacements?

[CTScott]

are the breaks oem or aftermarket replacements?

The Calipers definitely are. I am not 100% sure, but I believe that the rotors are as well.

51605

51606

51607

[weapon5]

how about the wire that plugs to the rear passenger abs sensor? if its not sold please pm me on pricing. thanks :D

[CTScott]

how about the wire that plugs to the rear passenger abs sensor? if its not sold please pm me on pricing. thanks :D

Unfortunately no ABS on this one.

[weapon5]

bummer, i am guessing the mt conversion is taken too :(

[CTScott]

bummer, i am guessing the mt conversion is taken too :(

Actually not yet. I just shot you a PM with the details.

[Shinare]

Pleasure doing business with you!

[Yoda]

I need a throttle body. My tps is shot. Do you have?

[CTScott]

I need a throttle body. My tps is shot. Do you have?

I do indeed.

[Shinare]

Got my part in the mail yesterday! Thank you!

[cali yaris]

Got my stuff today. Thank you CTScott! :bow:

[Astroman]

Got my parts a few days ago. ot everything I need to restore my fresh and recirculating air system back to normal. Now just need my car...

Thanks Scott!!! Wish I could have afforded the MT parts from you, would have been perfect!

[dumbo0]

Do you still have the light grey panel on the back seat, its kind of a big trim piece.. I want those..

[CTScott]

Do you still have the light grey panel on the back seat, its kind of a big trim piece.. I want those..

No. All of the rear interior pieces are gone.

[CTScott]

Added more parts (below). Also, AT to MT conversion kit is still available.

Set of 4 06-11 Hatchback OEM floor mats: $50
OEM muffler: $25
OEM Mid Pipe: $100
Left rear fender liner: $15
Right rear fender liner: $15
Left front drive axle: $40
OEM Springs (x4): $40

AT to MT kit will include:

Pressure plate
Clutch
M/T Flywheel
M/T Mounting plate
Flywheel Bolts (M/T bolts are longer than A/T bolts)
Clutch pedal
Brake pedal (M/T is smaller)
Clutch master cylinder
Clutch slave cylinder
Clutch hydraulic lines (Main line, bleeder line, rubber line to slave cylinder)
Brake Master Cylinder and Reservoir (different on M/T, since clutch fluid is sourced from the brake reservoir)
Lower shift boot & plate
Upper Shift boot & Finisher plate.
Shifter
Shift cables
MT ECM (reprogrammed for your VIN)
Left Motor/tranny mount
Rear Motor/tranny mount
Connector and wiring for reverse sensor on MT

[Yoda]

Thank YOU!
Got the part in 2 days perfectly packed. This guy right here buy his stuff!

[ilikerice]

quick question. is the front bumper a total loss? I just need a 07-08 bumper for autocross. i dont care about how much damage. i need it for the fact it is attached to the car for autocross.

[ilikerice]

I see its in the sold/too damaged part. But could you either post a pic of it here or PM me a pic of the bumper where its damaged, if not sold already.

[CTScott]

I see its in the sold/too damaged part. But could you either post a pic of it here or PM me a pic of the bumper where its damaged, if not sold already.

It was pretty chewed up on the right side, so I cut it up an disposed of it. It would not have been able to latch on the right side.

[ilikerice]

Ahh. Thanks.

[Hayabusaboy]

Looking for the map light (not dome). The switches are bad on mine, can't just buy the switches. Please email at belltrafton@fairpoint.net if you have one available.

[CTScott]

Looking for the map light (not dome). The switches are bad on mine, can't just buy the switches. Please email at belltrafton@fairpoint.net if you have one available.

I do indeed. I will shoot you an email.

[JumpmanYaris]

Scott I need that front emblem with the back pice shipped to 47129?

[CTScott]

Scott I need that front emblem with the back pice shipped to 47129?

PM sent.

[hatchbackkid82]

How much for the passenger side mirror shipped to 20912?

Is it a power mirror and will it fit a sedan?

[CTScott]

Added more items and pictures to the first post

[Hayabusaboy]

Thank you Arthur, got my part today.

[MyzticZ3r0]

Hey Scott, I'd like to buy Center vent assembly, shipped to 89113. =]

[mattaniah]

do you still have the seat sliders? I will buy them - if you can ship them to WA state

[CTScott]

do you still have the seat sliders? I will buy them - if you can ship them to WA state

I do. PM me you address and I'll calculate shipping cost.

[dragoonmc]

i'm looking for the tube that comes out of the airbox but doesn't go to the throttle body.

[CTScott]

i'm looking for the tube that comes out of the airbox but doesn't go to the throttle body.

The rigid plastic U-shaped tube that is the air intake to the box? If so, I do have it.

[njiteb]

are the rear stock speakers the same as the front ones? if so, i'm interested and would drive to CT to get them if possible (or meet somewhere in between?) mailed to 02169 if postage isn't too bad

[CTScott]

are the rear stock speakers the same as the front ones? if so, i'm interested and would drive to CT to get them if possible (or meet somewhere in between?) mailed to 02169 if postage isn't too bad

The fronts are actually an inch larger in diameter than the rears.

[njiteb]

i'm still interested if they fit in the front though, if they don't, thanks!

[CTScott]

i'm still interested if they fit in the front though, if they don't, thanks!

They will fit since the front space are larger than the rears.

[tk-421]

Just got my package. Everything was packed really well.
CTScott FTMFW! :thumbsup:

[Adriaan]

finally got the package from the states and brought it back to Canada. Thanks again Scott, also the bill helped so much with customs. I could see the $ signs in the eyes until I showed them the bill.

[njiteb]

They will fit since the front space are larger than the rears.

can you calculate the shipping if they just fit right in to the slot? i need some replacements before i can get a pair of good ones.

[MyzticZ3r0]

I got my part! Thanks! Awesome as usual =]

[chaditotx]

Rear wiper arm?

[CTScott]

Rear wiper arm?

I have it as part of the complete hatch assembly. If that doesn't sell as such, I will let you know.

[D&D]

Is there such thing as a thin plastic panel that clips into place on the passenger side under the blower motor behind the glove box?

I have one on the driver side, and I'm not sure if it's just missing on my passenger side or if Yarii didn't come with it..

TIA

EDIT - Oh, and I'm still interested in the 2 wiper nut covers if you still have the windshield wipers and wouldn't mind snapping those off for me.. :)

[CTScott]

Is there such thing as a thin plastic panel that clips into place on the passenger side under the blower motor behind the glove box?

I have one on the driver side, and I'm not sure if it's just missing on my passenger side or if Yarii didn't come with it..

TIA

EDIT - Oh, and I'm still interested in the 2 wiper nut covers if you still have the windshield wipers and wouldn't mind snapping those off for me.. :)

The passenger side doesn't have one - It's wide open up there.

I sold the wiper arms complete, but I think I might just have another set of those covers. I will check and PM you if I do.

[D&D]

The passenger side doesn't have one - It's wide open up there.

I sold the wiper arms complete, but I think I might just have another set of those covers. I will check and PM you if I do.

Ah, good to know. :)

Great, thanks! I bought some on ebay that came off of a similar vintage Toyota truck, but they were too small.

[xbr3akd0wnx]

side mirror covers for sale?

and how much for shipping to 90045?

[CTScott]

side mirror covers for sale?

and how much for shipping to 90045?


Passenger one was sold, but driver's side one is still available.

[nevplus]

i received my item very quickly and the packaging was excellent, Thank you

[CTScott]

First page is updated with items still available.

Lots of parts still available and taking up garage space. If there is something you are interested in, but think I am asking too much (or can't afford it), make me an offer - The worst I can do is say no.

[opt101]

scott please check pm

[opt101]

thank you

[MyzticZ3r0]

I bought the whiteline sway bar and it arrived within four days - awesome timing. I have to say - such a minute addition to the car makes the ride vastly different. Thanks for the item Scott. As usual, never disappointed!

[japle]

Scott, you received my mail?

[CTScott]

Scott, you received my mail?

No.

[Kla]

Looks like it might have already sold, but I need a passengers side tail light if you've still got it. :)

[CTScott]

Looks like it might have already sold, but I need a passengers side tail light if you've still got it. :)

Yes. Unfortunately the passenger one sold. Just the driver's side is left.

[ToyotaBuzz]

exploding zombie heads can apply a reasonable higher level of blood all round.

Can't argue with that. Good read.:clap:

[Yoda]

Let me know if you are willing to part with that ecu.
I need one that can work with my 08 MT

[CTScott]

Let me know if you are willing to part with that ecu.
I need one that can work with my 08 MT

I can definitely hook you up with a MT ECM. I have a few on hand that I use for development.

[Yoda]

My man. Pm me!

[Mz3oh5]

This sounds crazy.. but do you have the Antenna that goes for the Yaris? My antenna is total broken (dont ask) & I have no idea how the universal antenna is going to look like from Best Buy since the best quote they have give me is $50 to install a new one?

[CTScott]

This sounds crazy.. but do you have the Antenna that goes for the Yaris? My antenna is total broken (dont ask) & I have no idea how the universal antenna is going to look like from Best Buy since the best quote they have give me is $50 to install a new one?

I do have it. Do you need both the base and the whip?

[Mz3oh5]

Yes, I just need the base of the antenna :) How much are you selling it for?

[CTScott]

Yes, I just need the base of the antenna :) How much are you selling it for?

Good question. Discount Toyota parts places get $205 for it. I guess I could do $65 shipped for it.

[Yoda]

Woot got it today! Fast shipping and packed to perfection.
Nice doing business with you once again.

[barebonedvitz]

is the driver side mirror still available!??? i just need the cover and mirror

[CTScott]

is the driver side mirror still available!??? i just need the cover and mirror

Yes. The driver's side one is still available.

[dj92]

Do you have luggage room light left?
I'm having a hard time finding one here :(

[CTScott]

Do you have luggage room light left?
I'm having a hard time finding one here :(

I was going to say no, but then checked my parts repository and I actually have two of them.

[Mz3oh5]

No thanks, I found the exact base antenna for $20 online.

[CTScott]

No thanks, I found the exact base antenna for $20 online.

That's a great price. Toyota charges over $200 for the antenna base.

[tooter]

Hey Scott, :smile:

I understand that the engine sold, but did the intake manifold sell along with it? I'm looking for one I can use to develop a tooter intake manifold spacer.

I stupidly sold the two I had and never believed that I would ever need them again! :bonk:

Thanks,

Greg

[CTScott]

Hey Scott, :smile:

I understand that the engine sold, but did the intake manifold sell along with it? I'm looking for one I can use to develop a tooter intake manifold spacer.

I stupidly sold the two I had and never believed that I would ever need them again! :bonk:

Thanks,

Greg

I did sell the intake manifold, but I have an extra that is cracked the face of the runners, but is fine on the engine side. You can have it for the cost of shipping.

[tooter]

I did sell the intake manifold, but I have an extra that is cracked the face of the runners, but is fine on the engine side. You can have it for the cost of shipping.

Thanks for your offer, Scott. :smile:
Could you post a pic so I can see if the crack would prevent the engine from running right? I'm looking for one that would work well enough to do dyno runs.

Thanks,

Greg

[CTScott]

Thanks for your offer, Scott. :smile:
Could you post a pic so I can see if the crack would prevent the engine from running right? I'm looking for one that would work well enough to do dyno runs.

Thanks,

Greg

Sure. I will zing you a picture when I get home this evening. I actually taped the crack to allow the engine to run fine, until I picked up a replacement one.

[CTScott]

Thanks for your offer, Scott. :smile:
Could you post a pic so I can see if the crack would prevent the engine from running right? I'm looking for one that would work well enough to do dyno runs.

Thanks,

Greg

Here's a picture of the one I have on hand. It had a crack in the #1 runner from the radiator getting pushed against it. I drove it for a bit with electrical tape over the crack and then siliconed it for a more heat resistant seal. I drove it for a couple of weeks before finding a non cracked one.

52214

[tooter]

Thanks for taking the time post a pic, Scott. :smile:
I'd take it if it was just for testing, but think I need to pass because if the prototype spacer dyno tests good numbers, I'll still need to get an intact intake manifold for the marketing pictures.

Greg

[yar155]

Hey, just wondering if the hub caps were still available?
I am in need of 14" if you have them, I'm also in AUS 4053, but willing to pay for shipping :)

[CTScott]

Hey, just wondering if the hub caps were still available?
I am in need of 14" if you have them, I'm also in AUS 4053, but willing to pay for shipping :)

Hubcaps are gone. They were 15". 14" ones are hard to find here in the US.

[yar155]

No problem - thanks anyway :)

[Brett!]

Do you still have the manual to auto door actuators? I did not see that on the list. :)

[CTScott]

Do you still have the manual to auto door actuators? I did not see that on the list. :)

I don't have the ones from that car, but I do have a brand new aftermarket power lock kit on hand (includes 4 actuators and the module). It is a 5 wire kit, which allows you to unlock all of the doors by flipping the lock on any other door. With that you don't have to install door lock switches.

I can do $30 shipped for the kit.

[Akramzahid]

HI CTScott
i want purchase toyota yaris 2007 steering wheel audio control button
please tell me where i buy this product new or used both are accepted .
Please help me..........
i am from pakistan
Akram Zahid

[JustPassinThru]

This is a fascinating thread - like dangling chum before sharks. Never realized there'd be this kind of interest in parts for one car.

I remember one of those Q&A columns in one of the syndicated Sunday mags...some kid was talking about "parting out" his mother's car. The writers mocked it; pointed out the limited market for parts for (I think it was) a ten-year-old Toyota Camry.

Here you've done that, and the water's frothy with the feeding. You don't have to answer if you don't want...but I wonder if it all paid for itself and if it was worth it.

[CTScott]

This is a fascinating thread - like dangling chum before sharks. Never realized there'd be this kind of interest in parts for one car.

I remember one of those Q&A columns in one of the syndicated Sunday mags...some kid was talking about "parting out" his mother's car. The writers mocked it; pointed out the limited market for parts for (I think it was) a ten-year-old Toyota Camry.

Here you've done that, and the water's frothy with the feeding. You don't have to answer if you don't want...but I wonder if it all paid for itself and if it was worth it.

If I didn't have to ship the car across the country it would have been great. With the cost of shipping I ended up making a very small profit off parting it. Most would consider it to not be worth it, but I enjoy doing it and learn a bit more each time. The less common a car is (and the more expensive its parts), the more fruitful parting can be. The Yaris meets the less common criteria (compared to the Camry for instance), but doesn't meet the expensive part criteria (compared with BMWs that a friend of mine parts out).

[HTM Yaris]

I would like the muffler and mid pipe please.

[CTScott]

I would like the muffler and mid pipe please.

Unfortunately I ended up using them on the silver one that I just rebuilt.

[japle]

bro, is the rear bumper foams and the left cover between the bumper and the tire still available?

[CTScott]

bro, is the rear bumper foams and the left cover between the bumper and the tire still available?

The bumper foams are still available for sure. I need to check my parts to see if I have the rear trim pieces that go between the bumper and the tire.

[tk-421]

I have a list of parts that I'm WTB ASAP. Please let me know if you got 'em!

04945-52130 & 04478-52070
48068-59145 & 48069-59135
48820-52030
48815-52090

I'm also interested in the rear drum brakes, but I don't have a P/N for those. Besides, I'm sure they're super heavy and thus really expensive to ship.

[CTScott]

I have a list of parts that I'm WTB ASAP. Please let me know if you got 'em!

04945-52130 & 04478-52070
48068-59145 & 48069-59135
48820-52030
48815-52090

I'm also interested in the rear drum brakes, but I don't have a P/N for those. Besides, I'm sure they're super heavy and thus really expensive to ship.


OK. I have the following of your list:
Front calipers - I have a pair of perfect calipers (which would be easier than installing the rebuild kit)
Stabilizer Links - I have a brand new pair
Left control arm


I don't have:
Brake pad shims
Rear drums (sold a while back)
Right control arm
Stabilizer bar bushing


If it would be easier/cheaper for you, I could pick up the rest of the parts that you need and ship them down to Mexico. For the rear brakes, it might be more economical for shipping to just grab the shoes and springs, unless you really need the drums as well.

[tk-421]

I'll ask if the shoes & springs are enough tomorrow morning. They did mention that the drums were quite worn (but they could just be pulling my leg).

As for you getting those parts, I would be forever grateful if that's not too much of an inconvenience. Here's the price list sent by my dealer (converted to USD) for your reference:

04465-52260 $142.011
04495-52140 $132.191
04945-52130 & 04478-52070 $51.2902
90916-02500 $67.0044
48068-59145 & 48069-59135 $844.023 :eek:
48820-52030 $250.870
48815-52090 $124.519

[CTScott]

I'll ask if the shoes & springs are enough tomorrow morning. They did mention that the drums were quite worn (but they could just be pulling my leg).

As for you getting those parts, I would be forever grateful if that's not too much of an inconvenience. Here's the price list sent by my dealer (converted to USD) for your reference:

04465-52260 $142.011
04495-52140 $132.191
04945-52130 & 04478-52070 $51.2902
90916-02500 $67.0044
48068-59145 & 48069-59135 $844.023 :eek:
48820-52030 $250.870
48815-52090 $124.519

Wow! That is crazy. I am guessing that I should be able to get you everything for under $300 shipped.

[tk-421]

I knew those prices were inflated, but I had no idea it was this bad. I owe you BIG TIME! :bow:

[japle]

The bumper foams are still available for sure. I need to check my parts to see if I have the rear trim pieces that go between the bumper and the tire.

If the rear trims are still there, i want them too, can you work out the total including shipping to my place? Thanks

[CTScott]

If the rear trims are still there, i want them too, can you work out the total including shipping to my place? Thanks

I found them. They were under half a meter of snow.

Just to verify before I run the shipping numbers, here is a picture of the parts I believe you are looking for:

52714

[xbr3akd0wnx]

do you still have the front plastic skid plate? Mine are all torn away from the bolts and scratch the roads when i hit a dip

[CTScott]

do you still have the front plastic skid plate? Mine are all torn away from the bolts and scratch the roads when i hit a dip

No. That sold quite some time ago. I actually need one now myself and am in the process of making an aluminum one, as the OEM plastic ones are quite expensive.

[japle]

I found them. They were under half a meter of snow.

Just to verify before I run the shipping numbers, here is a picture of the parts I believe you are looking for:

52714

Thats them allright, how much incl shipping?

[japle]

Those panels go between the tires and the bumper on the inside right?

Refer page et44 from service manual, exterior section

Sorry, cant really see them, but judging from the size, i think its them.

[CTScott]

Those panels go between the tires and the bumper on the inside right?

Refer page et44 from service manual, exterior section

Correct on the trim panels.


It looks like shipping would be crazy ($278) for the foam pieces, because of their size. The smallest I could box them is 5 inches over the limit for priority mail, so they would have to go GXG Express.

Shipping for the plastic trim panels alone would be $55 and I could do $20 for them.

[japle]

i think we can forget about shipping it over here since its way too expensive...

[CTScott]

i think we can forget about shipping it over here since its way too expensive...

I wish I could find a more reasonable way to ship large (any dimension over 12") items overseas. I have been working with Fedex, but even with my discount for my business, they are still more expensive than USPS.

[tk-421]

Shipping containers are an option, but larger or more irregular package sizes also add a lot to the cost.

[CTScott]

Shipping containers are an option, but larger or more irregular package sizes also add a lot to the cost.

I don't need to go that large, but for example the parts pictured above that Japle was interested in would fit in a box 26" x 18" x 12", which is by no means a huge box, but with USPS (which for packages this size is almost always the cheapest method of shipping out of the US) it exceeds the maximum box size for Priority Mail, so you have to move up to GXG Express, which is crazy expensive.

[tk-421]

If it's not a huge size, then shipping via container tends to be the least expensive option, with the tradeoff being that it takes longer to arrive. It's only oversized or odd-sized packages that tend to be overcharged since it's more difficult to fit them inside each container (considering that they try to fill each one as tightly as possible).

[japle]

I think i will pass on the foams, just send me an invoice for the rear covers, thanks scott

[CTScott]

I think i will pass on the foams, just send me an invoice for the rear covers, thanks scott

Will do. Thank you.

[yariseggvvti]

Hello, how are you?

I'm looking for the fuse cover under the dash.

If you have it, how much.

thx!

[CTScott]

Hello, how are you?

I'm looking for the fuse cover under the dash.

If you have it, how much.

thx!

PM Sent.

[japle]

Will do. Thank you.

Payment sent, please check

[CTScott]

Payment sent, please check

Got it - Thanks. They will ship first thing Monday morning.

[baryaris]

Do you have the cover/lid for the drivers glovebox?

[CTScott]

Do you have the cover/lid for the drivers glovebox?

Yes. I do have one of those available.

[dumbo0]

Do you have the light for license plate?

[CTScott]

Do you have the light for license plate?

Yes.

[tk-421]

Just wanted to drop a big THANK YOU to CTScott for the excellent service all around. The parts just got here and everything is packed perfectly. :thumbsup:

[trini_per4mance]

Hi, do you still have the midpipe? It's the part of the exhaust from the header to the axle back with the 2 cats and the resonator on it.

[CTScott]

Hi, do you still have the midpipe? It's the part of the exhaust from the header to the axle back with the 2 cats and the resonator on it.

I ended up using that on the silver one that I recently rebuilt.

[ynnek317]

Do u still have the Hatch Struts??

[CTScott]

Do u still have the Hatch Struts??

I do, but I am not sure if it would be cost effective to ship them to Suriname. I can check the shipping cost though if you are interested.

[mkochjr]

You still have that steelie available? I'm interested. Located in Illinois.

[CTScott]

You still have that steelie available? I'm interested. Located in Illinois.

I just recently shipped the last one that I had.

[mr_miles]

Would you happen to have the part for the drivers seat slider that you grab to move the seat? I broke mine :( Can't move my seat anymore. everything else is still good, just the handle broke. lol

[CTScott]

Would you happen to have the part for the drivers seat slider that you grab to move the seat? I broke mine :( Can't move my seat anymore. everything else is still good, just the handle broke. lol

Unfortunately not. I sold the seat sliders.

[axiom]

Just gotta place a big "THANK YOU" to CTScott. He got me some parts I was looking for. He sold them to me at a great price and shipped them out very quick. Thanks again Scott!!

[randeez]

edit - nevermind! browsed through thread looks like you've sold everything I needed/wanted

[CTScott]

edit - nevermind! browsed through thread looks like you've sold everything I needed/wanted

What are you looking for? I often get additional influxes of parts.

[randeez]

Just some interior trim, a pillar and upper most piece on door

[alias06]

Random question here, but do you have the two springs that attach to the passenger storage compartment? And maybe the climate control assembly? Also quoted shipped to 56001,

[CTScott]

Just some interior trim, a pillar and upper most piece on door

Unfortunately I don't have those at the moment.

[CTScott]

Random question here, but do you have the two springs that attach to the passenger storage compartment? And maybe the climate control assembly? Also quoted shipped to 56001,

I don't have the clips, but I do have a climate control assembly. I will check on shipping and shoot you a PM.

[gumby002]

Do you still have the passenger wiper arm?
Also need (1) wheel cover as somehow mine disappeared.
Shipping to 32092

[CTScott]

Do you still have the passenger wiper arm?
Also need (1) wheel cover as somehow mine disappeared.
Shipping to 32092

Wiper arms and hubcaps are gone.

[Golddeenoh]

You don't by chance still have the Engine/trans mounts do you?

[CTScott]

You don't by chance still have the Engine/trans mounts do you?

I have the engine mount and the side tranny mount (which is actually identical for AT and MT, even though the part numbers are different). I don't have the rear dog bone MT mount available though.

[Golddeenoh]

how much for the oil filled one that would be mounted to the front of the engine?

[CTScott]

how much for the oil filled one that would be mounted to the front of the engine?

I could do $55 shipped for it.

[cwajms]

I apologize if someone asked already but I would like to buy the intake manifold, air box If not broken and radiator. Thanks

[CTScott]

I apologize if someone asked already but I would like to buy the intake manifold, air box If not broken and radiator. Thanks

The intake manifold had a crack, which I repaired, but it is not a pretty repair.

The radiator was too damaged to be reusable.

[X92Festy]

I need one wheel cover like on your white crashy and the nut cap in the bottom of my center console cup holder/it covers up that bolt. Thanks.

[CTScott]

I need one wheel cover like on your white crashy and the nut cap in the bottom of my center console cup holder/it covers up that bolt. Thanks.

All the wheel covers are gone as is the felt circle for the center console. That piece is only about $7 from the dealer.

[CrankyOldMan]

Is that single steel wheel still available?

[CTScott]

Is that single steel wheel still available?

No. Someone grabbed that recently as a full size spare.

[nortonfb]

I have some steel wheels with tires.
$25 each, plus any shipping. I'm in the metro Detroit area
Your welcomed to pick them up if your on the "right" side of the state.
Steve

[MyzticZ3r0]

I have some steel wheels with tires.
$25 each, plus any shipping. I'm in the metro Detroit area
Your welcomed to pick them up if your on the "right" side of the state.
Steve

FYI, it's impolite to threadjack. It works in your favor as well.

Anyways, Scott, by any chance, do you have the smaller antenna? =]

[CTScott]

FYI, it's impolite to threadjack. It works in your favor as well.

Anyways, Scott, by any chance, do you have the smaller antenna? =]

LOL. I actually don't mind the threadjack, as long as it is for an item that I don't have.


For the antenna, it had the long metal whip, which I do have.

[MyzticZ3r0]

Darn, I was hoping you had the smaller bullet one on hand. Oh well, thanks anyways! =]

[ApolloJA]

Is the headlight available?

[CTScott]

Is the headlight available?

No. Headlight sold.

[Astroman]

I'm looking for the passenger side map light cover and on the auto the little cover for the shift lock. Have any of that?

[CTScott]

I'm looking for the passenger side map light cover and on the auto the little cover for the shift lock. Have any of that?

I knew I didn't have the litter shift lock cover, as they are always missing from wrecked ones (I think the tow truck dudes pop them out and throw them over their shoulder for good luck). The part number for him is: 33554-52030

I was sure I had a map light assembly, but it looks like I sold it at some point. I am amazed that the covers are available separately. The right side one is: 81265-52020

I really need to take an inventory of what I have/don't have at this point.

[YarisSedan]

Im looking for strut bearings and bump stops if they are available

[CTScott]

Im looking for strut bearings and bump stops if they are available

Those are gone.

[ilikerice]

is the passenger side hood hinge damaged?

[CTScott]

is the passenger side hood hinge damaged?

It was, but I just so happen to have a brand new set of hood hinges on hand that I bought for the red one, but ended up not needing. I can do $15 shipped on the passenger one.

[Astroman]

Thanks Scott! I'm looking online now for the parts.

[zajac908]

do u still have the driver side door and is it manual
please email me or text me

908-414-9438
mzajac86@gmail.com

mike

thank u

[CTScott]

do u still have the driver side door and is it manual
please email me or text me

908-414-9438
mzajac86@gmail.com

mike

thank u

I did, but I ended up mounting the doors to Crashy (my snow plowing Yaris). It was such a pleasure not getting a lap full of snow every time that I plow that it looks like they will be staying on her.

[zajac908]

if u come across a door please let me know my sister really needs one thank you again

[CTScott]

if u come across a door please let me know my sister really needs one thank you again

How bad is her's damaged? If the glass is still intact and the door can still close, it would still work for my purposes.

[komobabo]

Bit of an odd request. But what about the trim cover for the rear view mirror, the driver side one. Mine recently went "missing".

Sent from my HTC One_M8 using Tapatalk

[CTScott]

Bit of an odd request. But what about the trim cover for the rear view mirror, the driver side one. Mine recently went "missing".

Sent from my HTC One_M8 using Tapatalk

Mirror covers sold. Those are actually a frequently sought after part.

[komobabo]

Damn thanks anyway.

Sent from my HTC One_M8 using Tapatalk

[nookandcrannycar]

Mine recently went "missing".

I was volunteering (Habitat for Humanity) in the Florida neighborhood in the 9th Ward in New Orleans in 2008. I returned to my car (to go get some lunch, IIRC) to find the same thing...the mirror cover "missing".

[komobabo]

Damn man. Sucks.

Sent from my HTC One_M8 using Tapatalk

[baseballfan416]

curious with regards to the front knuckles… If one were to need a new wheel bearing, could replacing the knuckle completely solve this issue?

[CTScott]

curious with regards to the front knuckles… If one were to need a new wheel bearing, could replacing the knuckle completely solve this issue?

Yes, as the wheel bearings are pressed into the knuckles.

[PatrickJohnson]

Hey CT, do you happen to still have the interior panels and door panels? I need... all of them :)

[CTScott]

Hey CT, do you happen to still have the interior panels and door panels? I need... all of them :)

No. All the interior panels sold.

[PatrickJohnson]

boo.

[ezhacker1]

Have the part number:12315-21041? The engine mount bracket.

[CTScott]

Have the part number:12315-21041? The engine mount bracket.

I do indeed have that one on hand. I could do $25 shipped, as that is one heavy little bracket (4 lbs).

[ezhacker1]

I'll see if I can fish the bolt that is broken inside from mine or not. If I cant , I'll buy it from you.

[JBJ858]

How much for the passenger side door shipped to California?

[CTScott]

How much for the passenger side door shipped to California?

I ended up keeping the doors for Crashy. The 3 door doors weigh over 80 lbs and with their dimensions they are limited to freight shipping, so shipping them ends up being very cost prohibitive.

[SKurj]

Mebbe silly.. but.. will the rear hatch fit an 09? Curious what it would take to get the rear wiper working. My 09 didn't come with the rear wiper (its a base) and it would sure come in handy.

[CTScott]

Mebbe silly.. but.. will the rear hatch fit an 09? Curious what it would take to get the rear wiper working. My 09 didn't come with the rear wiper (its a base) and it would sure come in handy.

For the rear hatch you can use one from an 06 to an 11 on your 09. Unfortunately the one that I had sold (and for cheap, as I kept dropping the price on ebay).

I haven't looked closely at a base one to see if the wiring is present for the rear wiper, but I would not doubt that it would be. You would also need the wiper stalk with the rear wiper switch on it. To use the rear washer you would need to change the wiper fluid reservoir to the one with two pumps and add the tubing that runs from there to the hatch.

[SKurj]

For the rear hatch you can use one from an 06 to an 11 on your 09. Unfortunately the one that I had sold (and for cheap, as I kept dropping the price on ebay).

I haven't looked closely at a base one to see if the wiring is present for the rear wiper, but I would not doubt that it would be. You would also need the wiper stalk with the rear wiper switch on it. To use the rear washer you would need to change the wiper fluid reservoir to the one with two pumps and add the tubing that runs from there to the hatch.

Wow I did not expect that the rear wiper used the front fluid bottle for the washer. I expected there to be a washer bottle somewhere in the rear of the car. Probably more hassle than I want to get into..

[redfivexw]

Hi,
Looking for the passenger seat, the charcoal one with the blue dots on it. Got one?

[CTScott]

Hi,
Looking for the passenger seat, the charcoal one with the blue dots on it. Got one?

No. Both seats sold.

[Yoda]

Do you having any exhaust stuff still left for sale? Looking for the compression springs with the bolts and two of the donut exhaust gaskets.