Want fog light projectors

[Eren_13]

Hey all

As the title states, I'm looking to potential upgrade my fog light fittings on a third gen Yaris to projectors. Any out there that are recommended?

I'm using my fogs as DRLs at the moment and I like that clear light output you get from projectors.

Thanks in advance!

[1.5]

Garm use to have them listed in his store but I cant find them anymore. Shoot him an email and see if he has any left over or can order a set

[Eren_13]

Thanks for the reply. Will go ahead and send over an email. Are they a straight replacement for the yaris then? And while its mentioned, anyone got any photos of them installed?

[cali yaris]

We had projector foglights for the sedan, but I'm not sure if we did for the liftback. I'll have to look back through the orders to see.

[1.5]

Oh I didnt know they were different

[Eren_13]

We had projector foglights for the sedan, but I'm not sure if we did for the liftback. I'll have to look back through the orders to see.

Thank you! It is lift back I'm after. I've mentioned previously but it's for the 3rd gen as well.

[cali yaris]

I haven't seen any projector fogs for the 3rd gen liftback. Always looking though.

[Eren_13]

I haven't seen any projector fogs for the 3rd gen liftback. Always looking though.

Thank you :) please let us know if you do find something!

[Scubaru Steve]

after my wife takes delivery of her yaris i will be doing some measureing to see if i can get these to work, these also are ready to be wired up as high beams. they look sweet!

https://www.theretrofitsource.com/product_info.php?products_id=18725

[JustDidIt]

Do a retrofit....I did. Since the Mini H1 Headlight Retro Fit went so well. Was considering the projector fogs.

Some photos taken from here:FOG COMPARISON :: Hella, Blazer, Bosch, OEM Reflector (http://www.hidplanet.com/forums/showthread.php?30382-FOG-COMPARISON-Hella-Blazer-Bosch-OEM-Reflector/page5)

But wasn't happy with the beam pattern as fog lights... but they make a GREAT driving light with a GREAT cut off...but no foreground for fog light use...but after seeing the light pattern from the Hella Micro De Fog Light - pretty sure this is what I'll use:

http://img210.imageshack.us/img210/1340/microde00.jpg

Comparison of the light pattern - Blazer has awesome cutoff but barely any foreground:

http://img202.imageshack.us/img202/5882/blazermicrodecompare01.jpg

http://img853.imageshack.us/img853/9181/blazermicrodecompare02.jpg

I'll like mount them in the yellow lens housing foglights to keep the look I already have:

http://img707.imageshack.us/img707/4345/04scionxaoemfoglightsye.jpg

Retro fitting - Kinda like this - using a circle cutter or dremel to round out the back housing to mount the Hellas in the OEM fog light - thus retaining mounting points and aiming capability. I will be using a H3 3000k HID 55W setup with this.

http://www.tacomaworld.com/forum/attachments/lighting/124311d1320817469-blazer-fog-light-retro-2011-11-05-17.06.54.jpg

(FYI...the above fog lights aren't mind or the oem 3" fog lights - this image was pulled from a Tacoma retrofit using 4" fog lights.)

[JustDidIt]

So the lights came in... http://img685.imageshack.us/img685/5858/hellamicroderetrofit01.jpg

But the OEM housing is a PITA to cut open...must be die-cast aluminum.
https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcTP9MnZTvvfJg9tuRr8Z2qnB_OO6ONDL r4XeugZ3p4wYz9wKx2b5g

http://img823.imageshack.us/edit_preview.php?l=img823/23/nhw20foglightretrofit01.jpg&action=rotate

http://imageshack.us/a/img19/23/nhw20foglightretrofit01.jpg

[JustDidIt]

...and Finished!
Hella Micro De mounted with JBWELD to OEM cast aluminum fog light
http://imageshack.us/a/img507/2852/nhw20foglightretrofit04.jpg

http://imageshack.us/a/img854/4994/nhw20foglightretrofit07.jpg

Broke the glass lens while trying to separate the glass from the housing, ended up getting some .25" glass cut to 3.5" circles then coated them with 3 coats of Dupli-color Metalcast Yellow from TCPGlobal and 2 coats of clear spray paint to get the yellow lens look I wanted. Then resealed the lens with a waterproof silicone. You can see that the paint isn't 100% clear but doesn't stop the 3000k HID bulbs much. The good thing about doing the paint this way, I can remove the yellow paint at anytime in case I want to change the color of the bulb or lens and no longer have yellow fog lights but a 5000k driving light.
http://imageshack.us/a/img853/9090/nhw20foglightretrofit06.jpg

H3 3000k HID bulb held in by (6) washers
http://imageshack.us/a/img41/541/nhw20foglightretrofit05.jpg

Because of the new length and size of fog light the bumper mounts for the oem bulb had to modifed and resized as well as a hole had to be opened behind the headlight for the length and the back of the HID bulb wires. This is a picture of roughly what was done with a dremel.

OEM ---------------------------------------------------------Modified
http://imageshack.us/a/img341/5534/nhw20foglightretrofit03.jpg

Installed
http://imageshack.us/a/img35/8604/nhw20foglightretrofit08.jpg

Just need the adjust the aiming...will have that done hopefully this wknd.
http://imageshack.us/a/img20/8937/nhw20foglightretrofit09.jpg

[yarisgeo13]

Nice addition on the lights.